{"title":"Raspberry Pi Cases","description":"\u003cp\u003eBrowse our Raspberry Pi Cases collection. Best Price.\u003c\/p\u003e","products":[{"product_id":"black-zipper-sleeve-case-with-handle-for-raspberry-pi-500400","title":"Black Zipper Sleeve Case with Handle for Raspberry Pi 500\/400","description":"\u003cp\u003e\u003cstrong\u003eThis Raspberry Pi 500\/400 Zipper Sleeve Case gives your Pi 500\/400 a padded, protective place to travel, with a carry handle and internal mesh pocket for keeping cables, mice and other small accessories together.\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eHow many bags and pockets does an OTG (On The Go) maker need to carry their electronics when away from their desk? The world may never know. \u003c\/p\u003e\n\u003cp\u003eWe get serious satisfaction when things fit into other things, so we fell in love with this zipper sleeve case as it is the exact perfect size for a Raspberry Pi 500! Of course, it can also fit other keyboards that are no more than \u003cstrong\u003e310mm long \u003c\/strong\u003eand \u003cstrong\u003e150mm wide\u003c\/strong\u003e. Its got a stiff outer layer to protect the delicate electronics from smashing, and soft padding to keep parts cosy on the inside.\u003c\/p\u003e\n\u003cp\u003eThere's even a \u003cstrong\u003egrippy handle\u003c\/strong\u003e and an inside \u003cstrong\u003emesh pocket\u003c\/strong\u003e that you can use to stash accessories like mice, USB cables, alligator clips, jumper wires, extra batteries, etc! Not too big and not too small, the perfect carrying size and pops easily into a bigger bag, if needed. Comes in classic Adafruit Black.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e While the case is roomy and accommodating, we recommend against cramming too many accessories or electronics in the pouch and sleeve.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eContents not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/4xOJ9ucNVZ0?si=aWBqUHu8kklI69Gp\u0026amp;start=249\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePerfectly sized for Raspberry Pi 500\/400 keyboards\u003c\/li\u003e\n\u003cli\u003eFits keyboards up to 310mm long and 150mm wide\u003c\/li\u003e\n\u003cli\u003eRigid outer layer protects electronics from damage\u003c\/li\u003e\n\u003cli\u003eSoft interior padding keeps components protected\u003c\/li\u003e\n\u003cli\u003eErgonomic grippy handle for easy carrying\u003c\/li\u003e\n\u003cli\u003eInterior mesh pocket for storing accessories\u003c\/li\u003e\n\u003cli\u003eCompact size fits easily into larger bags\u003c\/li\u003e\n\u003cli\u003eColour: Adafruit Black\u003c\/li\u003e\n\u003cli\u003eSuitable for mice, cables, jumper wires, batteries and more\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/ADA5292_Specs_image_1_9fd4e0e2-6583-4a02-a8b8-5544db85ce39.jpg?v=1787215032\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Black Zipper Sleeve Case with Handle for Raspberry Pi 500\/400\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643623997501,"sku":"mld1789691355298","price":13.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/black-zipper-sleeve-case-with-handle-for-raspberry-pi-500400_1.jpg?v=1789691360"},{"product_id":"deskpi-lite-raspberry-pi-4-case","title":"DeskPi Lite Raspberry Pi 4 Case","description":"\u003cp\u003eThis is the new DeskPi Lite case for the Raspberry Pi 4 - little sister to the DeskPi Pro V2.\u003c\/p\u003e\n\u003cp\u003eThe DeskPi Lite offers Raspberry Pi desktop convenience with additional handy features! It houses your Raspberry Pi 4 and re-routes your ports to practical locations, including dual full-size HDMI and 3.5mm audio on the rear, GPIO access on the side and SD access on the front alongside an extra 2x USB 2.0 ports.\u003c\/p\u003e\n\u003cp\u003eYou'll also find an illuminated power button on the front, next to the activity LED, giving everything you need from the front of the case just like a desktop PC.\u003c\/p\u003e\n\u003cp\u003eInside the case, the re-routing PCB includes a PWM-controllable fan attached to a heatsink unit for active cooling of your Raspberry Pi, supported by the ample ventilation on the ABS plastic body. Rubber feet ensure steady operation and minimal vibrations. You can even wall mount it!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly required. Raspberry Pi OS Configuration is required for fan control and to enable the front USB ports and power button. May not work on other Operating Systems.\u003c\/strong\u003e Please see the GitHub page for more info.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 4\u003c\/li\u003e\n\u003cli\u003ePorts re-routed to practical locations:\n\u003cul\u003e\n\u003cli\u003eOn the rear:\n\u003cul\u003e\n\u003cli\u003e2x USB 2.0\u003c\/li\u003e\n\u003cli\u003e2x USB 3.0\u003c\/li\u003e\n\u003cli\u003eDual full-size HDMI\u003c\/li\u003e\n\u003cli\u003eEthernet\u003c\/li\u003e\n\u003cli\u003e3.5mm Audio\u003c\/li\u003e\n\u003cli\u003eUSB-C power\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOn the side:\n\u003cul\u003e\n\u003cli\u003eGPIO access via soft cover\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOn the front\n\u003cul\u003e\n\u003cli\u003e2x USB 2.0 \u003cem\u003e(config required to enable)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicro-SD access\u003c\/li\u003e\n\u003cli\u003eIlluminated power button \u003cem\u003e(config required to enable)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eLED Indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eInternal PWM cooling fan and heatsink unit \u003cem\u003e(config required to enable)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eIlluminated power button \u003cem\u003e(config required to enable)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eSide GPIO access under soft cover\u003c\/li\u003e\n\u003cli\u003eRear slot for camera\/DSI cables\u003c\/li\u003e\n\u003cli\u003eABS plastic body with ample ventilation\u003c\/li\u003e\n\u003cli\u003eRubber feet\u003c\/li\u003e\n\u003cli\u003eWall mountable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x DeskPi Lite Case\n\u003cul\u003e\n\u003cli\u003eABS case\u003c\/li\u003e\n\u003cli\u003eInternal re-routing PCB\u003c\/li\u003e\n\u003cli\u003eInternal heatsink+fan unit\u003c\/li\u003e\n\u003cli\u003eThermal pads\u003c\/li\u003e\n\u003cli\u003eFixings\u003c\/li\u003e\n\u003cli\u003ePrinted manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nGitHub page\n\u003cul\u003e\n\u003cli\u003eEnabling Fan Temperature Control\u003c\/li\u003e\n\u003cli\u003eEnable Front USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003ePower Button - How to cut power\u003c\/li\u003e\n\u003cli\u003ePower Button - How to reboot\u003c\/li\u003e\n\u003cli\u003ePower Button - principle\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeskPi","offers":[{"title":"Default Title","offer_id":43643639562301,"sku":"iwi1789691604666","price":29.43,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/deskpi-lite-raspberry-pi-4-case_1.jpg?v=1789691609"},{"product_id":"abs-protection-case-for-raspberry-pi-zero","title":"ABS Protection Case for Raspberry Pi Zero","description":"\u003cp\u003eProtect your Raspberry Pi Zero 2 whilst maintaining full, practical access to all ports and pins with this ABS protection case from Waveshare.\u003c\/p\u003e \u003cp\u003eThis case gives you access to all of your Raspberry Pi Zero ports including power, HDMI, USB, SD and the GPIO pins. A convenient pin map is included on top of the case to help you navigate the pins when prototyping.\u003c\/p\u003e \u003cp\u003eThere's also a cut-out to feed your Pi Zero CSI camera cable out of the case for photography projects. The rear also has a single slot for wall mounting.\u003c\/p\u003e \u003cp\u003eFixings and a screwdriver are provided.\u003c\/p\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x ABS Protection Case\u003c\/li\u003e \u003cli\u003e1x Screwdriver\u003c\/li\u003e \u003cli\u003e1x Screws pack\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi Zero not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643640545341,"sku":"odv1789691622501","price":3.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/abs-protection-case-for-raspberry-pi-zero_1.jpg?v=1789691628"},{"product_id":"deskpi-pro-v2-for-raspberry-pi-4","title":"DeskPi Pro V2 for Raspberry Pi 4","description":"\u003cp\u003eFollowing feedback from the original DeskPi Pro case, 52Pi have released the latest DeskPi Pro \u003cstrong\u003e\u003cem\u003eV2\u003c\/em\u003e\u003c\/strong\u003e, which includes a number of improvements and the ability to mount either a 2.5\" SSD or an M.2 SATA SSD (\u003cstrong\u003enot NVME\u003c\/strong\u003e)!\u003c\/p\u003e\n\u003cp\u003eThe DeskPi Pro V2 maintains the same NUC-inspired aluminium body style as the original, with acrylic side panels to maintain Wi-Fi performance. \u003cspan\u003eTurn your Raspberry Pi into a great-looking, low-profile desktop machine with the huge list of features this stunning enclosure offers!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis case has it all - NUC-inspired aluminium alloy body with non-slip feet, internal \u003c\/span\u003elow-profile ICE tower cooler\u003cspan\u003e with PWM fan, 2.5\" SSD \/ M.2. SATA \u003c\/span\u003eSSD \u003cspan\u003ecompatible, port re-routing, power button with safe shutdown\/reset, full-size HDMI ports and more!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe ability to accept two different SSD formats is enabled by the clever internal adapter boards, which also re-route your Raspberry ports giving you frontal microSD and 2x USB access, with all other ports on the rear including two full-size HDMI ports, 3.5mm jack audio and all of your GPIO pins.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe case comes with its own custom (\u003cstrong\u003eUK\u003c\/strong\u003e) power supply to ensure enough power is available for your Raspberry Pi and SSD.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eNUC style aluminium alloy case\u003c\/strong\u003e\u003cbr\u003eThe aluminium alloy case provides better protection, while the front and rear acrylic panels ensure good Wi-Fi signal\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e2.5\" SSD or M.2 SATA SSD Interface\u003c\/strong\u003e\u003cbr\u003eInstall an M.2 SATA SSD or 2.5\" SSD thanks to the clever internal adapter boards \u003cstrong\u003e(UASP\/TRIM support TBC. NVME not supported)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDesigned with ports in mind\u003c\/strong\u003e\u003cbr\u003eAll the ports of the Raspberry Pi are placed on the rear, say goodbye to longer messy cables. Two USB 2.0 ports are also available at the front of the case for convenience.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull-Size HDMI Ports\u003c\/strong\u003e\u003cbr\u003eThe case converts the Raspberry Pi micro-HDMI ports to full-size HDMI\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpansion of 2 USB Ports\u003c\/strong\u003e\u003cbr\u003eTwo additional USB-host ports are placed on the front of the case for devices like a\u003cspan\u003e \u003c\/span\u003eUSB flash drive, gamepads, keyboard and mouse\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSafe-Shutdown \u0026amp; Reset\u003c\/strong\u003e\u003cbr\u003eAfter installing a driver, safe shutdown and Reset functions through the onboard MCU are available\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt-in ICE Tower Cooler with PWM fan\u003c\/strong\u003e\u003cbr\u003eThe specially designed Cooler supports adjustable fan temperature \u0026amp; speed control\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower Covered!\u003c\/strong\u003e\u003cbr\u003eThe DeskPi Pro Supports PD 2.0 and QC 3.0 power inputs, providing enough power for your Raspberry Pi 4 and SSD.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUK\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ePower supply included\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eGreat Add-ons Included\u003c\/strong\u003e\u003cbr\u003eA Brand-new Low-profile ICE Tower cooler and\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eUK\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eQC3.0 power supply are included in the kit\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x DeskPi Pro V2 Case\u003c\/li\u003e\n\u003cli\u003e1 x ICE Tower Cooler\u003c\/li\u003e\n\u003cli\u003e1 x \u003cstrong\u003eUK 3-pin\u003c\/strong\u003e QC 3.0 Power Supply\u003c\/li\u003e\n\u003cli\u003e1 x USB bridge Connector\u003c\/li\u003e\n\u003cli\u003e1 x Instruction Manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and SSD not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nDeskPi Pro Wiki\n\u003cul\u003e\n\u003cli\u003eCurrently tested Operating Systems\u003c\/li\u003e\n\u003cli\u003ePre-install Information\u003c\/li\u003e\n\u003cli\u003eInstall Instructions\u003c\/li\u003e\n\u003cli\u003eHow to boot from USB SSD\/HD\u003c\/li\u003e\n\u003cli\u003eHow to use onboard IR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eGitHub\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"DeskPi","offers":[{"title":"Default Title","offer_id":43643640709181,"sku":"qbd1789691627789","price":46.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/deskpi-pro-v2-for-raspberry-pi-4_1.jpg?v=1789691632"},{"product_id":"52pi-1u-19-rack-mount-for-raspberry-pi-4","title":"52Pi 1U 19\" Rack Mount for Raspberry Pi 4","description":"\u003cp\u003eMount four Raspberry Pi 4 boards in a single 19\" 1U rack with this new rackmount from 52Pi!\u003c\/p\u003e\n\u003cp\u003eThe all-metal rackmount supports 4x Raspberry Pi 4 boards and includes 4x adapter PCBs to relocate the SD card and HDMI0 ports on each Pi to the front of the unit, giving you USB, Ethernet, HDMI and Micro-SD access from the front of your rack.\u003c\/p\u003e\n\u003cp\u003eThe package also includes a fan board and a heatsink set for each Pi, ensuring your boards stay cool whilst also providing a 2.1mm DC option for powering your boards (regulated 5V only, no regulation onboard).\u003c\/p\u003e\n\u003cp\u003eThe rack is standard 1U size (19\"×1.75\" \/ 482.6×44.5mm) and is the perfect fit for a server rack.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi boards are not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e19\" rackmount is fit for Raspberry Pi 4B only, and each rackmount can hold 4 pcs Raspberry Pi 4B.\u003c\/li\u003e\n\u003cli\u003eRackmount Size is 1U standard, the dimension is 19\" x 1.75\" (482x44mm), fully compatible with 19\" server racks.\u003c\/li\u003e\n\u003cli\u003ePower Input: 5V DC\u003c\/li\u003e\n\u003cli\u003eEasy to assemble with attached screw pack.\u003c\/li\u003e\n\u003cli\u003eApplication: Raspberry Pi clusters,server farm， home assistance control center and so on.\u003c\/li\u003e\n\u003cli\u003eCooling Fan included.\u003c\/li\u003e\n\u003cli\u003eMicro HDMI to HDMI board provides easy access to HDMI port\u003c\/li\u003e\n\u003cli\u003eTF card to FPC board provides easy access to TF card slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 1U 19\" Rack Mount for Raspberry Pi 4\u003c\/li\u003e\n\u003cli\u003e4 x Fan DC Board\u003c\/li\u003e\n\u003cli\u003e4 x Micro HDMI to HDMI board\u003c\/li\u003e\n\u003cli\u003e4 x TF card to FPC board\u003c\/li\u003e\n\u003cli\u003e4 x Cooling Fan boards\u003c\/li\u003e\n\u003cli\u003e4 x HeatSinks\u003c\/li\u003e\n\u003cli\u003e4 x Flex Cable\u003c\/li\u003e\n\u003cli\u003eFixings\u003c\/li\u003e\n\u003cli\u003e1 x Quick Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/52pi-1u-rack-contents_1.jpg?v=1647966744\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAssembly\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003ePrinted instructions are also included in the package.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/52pi-1u-rack-assembly_1.jpg?v=1647966745\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643648704573,"sku":"ypy1789691709358","price":53.06,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/52pi-1u-19-rack-mount-for-raspberry-pi-4_1.jpg?v=1789691713"},{"product_id":"pi-hole-edition-raspberry-pi-4-flirc-case","title":"Pi-hole Edition Raspberry Pi 4 FLIRC Case","description":"\u003cp\u003eThe perfect home for your Raspberry Pi 4 and your Pi-hole ad-blocking project!\u003c\/p\u003e \u003cp\u003eThis exclusive Official Pi-hole edition FLIRC Raspberry Pi 4 case is made of a beautiful custom blue-tinted aluminium core heat sink that is sandwiched between two black, soft-touch shells. The top panel has the classic pi-hole logo branding, showing off your ad-denying abilities!\u003c\/p\u003e \u003cp\u003eThe aluminium housing of the case acts as a very efficient built-in heat sink, taking heat away from your Raspberry Pi 4 CPU and dissipating it through the case- no fans required!\u003c\/p\u003e \u003cp\u003eSupplied with the case are a thermal pad and 4 screws for the simplest Raspberry Pi case assembly. It only takes a few seconds to drop your Raspberry Pi into its new stylish home and show it off on your desk.\u003c\/p\u003e \u003cp\u003eWe included rubber feet to raise the enclosure and ensure a steady, scratch-free case for your desk. There is no need for disassembly to get to the SD card either!\u003c\/p\u003e \u003cp\u003eWe also include this case in our Official Pi-hole Raspberry Pi 4 kit, including everything you need to get started in one box.\u003c\/p\u003e \u003ch2\u003eGet Pi-hole!\u003c\/h2\u003e \u003cp\u003eVisit the Pi-hole website to learn more about this awesome ad-blocking project for your Raspberry Pi, then go to the documentation website to learn how to quickly and easily set up Pi-hole in your home!\u003c\/p\u003e \u003ch2\u003eFAQs\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\n\u003cstrong\u003eDoes the case support the Raspberry Pi 4?\u003c\/strong\u003e\u003cbr\u003eYes, designed, proven, and tested only for the Raspberry Pi 4B\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCan I see the Raspberry Pi's LEDs?\u003c\/strong\u003e\u003cbr\u003eYes, you can!\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eWhat does the case come with?\u003c\/strong\u003e\u003cbr\u003eThe case comes partially assembled. All you need to do is put your thermal pad on the CPU, drop your Raspberry Pi inside the case, and screw the bottom of the case on with the included screws.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDoes the case come with a Raspberry Pi?\u003c\/strong\u003e\u003cbr\u003eThe case does not come with a Raspberry Pi.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eCan I access the MicroSD Card?\u003c\/strong\u003e\u003cbr\u003eYes, the MicroSD card is accessible through a slot on the front of the case.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eHow do I attach the thermal Pad?\u003c\/strong\u003e\u003cbr\u003eTake off the plastic covering from both sides and place them on the CPU.\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eDoes this case support the Raspberry Pi 3B+, 3B, or 2?\u003c\/strong\u003e\u003cbr\u003eNo, get the standard FLIRC case for the Raspberry Pi 3 here\n\u003c\/li\u003e \u003c\/ul\u003e","brand":"FLIRC","offers":[{"title":"Default Title","offer_id":43643684028477,"sku":"gjm1789692144128","price":15.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pi-hole-edition-raspberry-pi-4-flirc-case_1.jpg?v=1789692150"},{"product_id":"aluminium-armour-mini-heatsink-case-for-raspberry-pi-zero","title":"Aluminium Armour Mini Heatsink Case for Raspberry Pi Zero","description":"\u003cp\u003eKeep your Raspberry Pi Zero 2 cool whilst providing protection with the Aluminium Armour Mini case!\u003c\/p\u003e\n\u003cp\u003eThis rugged case has a 2-in-1 design, cooling your Zero's CPU whilst also providing protection (and great looks!). Your Pi Zero sandwiches in between the aluminium top section and acrylic bottom layer, with an included thermal pad to help transfer heat to the aluminium top section. The top fins help to remove heat from the case without the need for noisy fans, keeping your board running at optimal temperatures in complete silence.\u003c\/p\u003e\n\u003cp\u003eThe case allows access to all ports and pins, including the GPIO header and camera connector. Assembly is simple with just a few steps to fit the case to your Raspberry Pi Zero. We have an assembly guide available here to help you through the process.\u003c\/p\u003e\n\u003cp\u003eLike the snazzy colour-coded GPIO header in the images? Pick one up here! We also recommend picking up some rubber feet to keep the case steady on your desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpdated version! \u003c\/strong\u003eWe are now shipping a version with a wifi symbol cut out of the top section to aid wireless signal transmission.\u003c\/p\u003e\n\u003cp\u003eWe also stock a similar case for the Raspberry Pi 4!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSilent cooling for your Raspberry Pi Zero 2\u003c\/li\u003e\n\u003cli\u003eAlso compatible with earlier Raspberry Pi Zero models (Zero W, Zero 1.3)\u003c\/li\u003e\n\u003cli\u003eAluminium top section for cooling, with an acrylic base layer\u003c\/li\u003e\n\u003cli\u003eAccess to all ports and pins, including GPIO and camera connector\u003c\/li\u003e\n\u003cli\u003eThermal pads included\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eColour: black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Black Aluminium Armour Mini Case parts (aluminium top, acrylic bottom)\u003c\/li\u003e\n\u003cli\u003eScrews\u003c\/li\u003e\n\u003cli\u003eThermal pads\u003c\/li\u003e\n\u003cli\u003eSmall allen key\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Zero not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of 09\/06\/2025 \u003c\/strong\u003e- we are now shipping a version with a wifi symbol cut out of the top section to aid wireless signals, and no longer comes with a black header.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643748319293,"sku":"jau1789693034523","price":6.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-armour-mini-heatsink-case-for-raspberry-pi-zero_1.jpg?v=1789693052"},{"product_id":"raspibox-pico-inc-5v-regulator-kit","title":"RasPiBox Pico (inc. 5V Regulator Kit)","description":"\u003cp\u003eThe RasPiBox Pico is a DIN rail enclosure and prototyping set for the Raspberry Pi Pico. The heart of the RasPiBox Pico is an additional proto PCB with an integrated voltage regulator.\u003c\/p\u003e\n\u003cp\u003eIt fits together with your Raspberry Pi Pico (\u003cstrong\u003enot included\u003c\/strong\u003e) in a 4-module DIN rail enclosure and allows you to build your circuit\/components around the Pico. All Pico GPIO pins are broken out around the internal proto PCB, with handy terminal blocks for connecting external components and power supply.\u003c\/p\u003e\n\u003cp\u003eWe are stocking the standard version which includes parts for a 5V\/1.7A voltage regulator (soldering required), and a transparent top.\u003c\/p\u003e\n\u003cp\u003eYour Pico will need male headers soldered to it to fit into the breadboard, you can pick up a Pico H here!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis product requires soldering!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMilled 4-module DIN rail enclosure\u003c\/li\u003e\n\u003cli\u003eTop shell with \u003cstrong\u003etransparent\u003c\/strong\u003e cover\u003c\/li\u003e\n\u003cli\u003eFor EN50022 DIN rails\u003c\/li\u003e\n\u003cli\u003ePCB with 2x 20 female pin headers to fit a Raspberry Pi Pico (not included)\u003c\/li\u003e\n\u003cli\u003eOptional integrated voltage regulator (input voltage 9-35V via 2-way terminal block)\u003c\/li\u003e\n\u003cli\u003eBreadboard \/ proto board for own circuits\u003c\/li\u003e\n\u003cli\u003eAll GPIO pins are marked and placed beside the breadboard area\u003c\/li\u003e\n\u003cli\u003e3x2 terminal blocks to connect external components to the breadboard\u003c\/li\u003e\n\u003cli\u003eRemovable protection for terminals\u003c\/li\u003e\n\u003cli\u003eOpening for the Micro-USB socket of the Pico on the top side\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi Pico only\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: RBXPCOS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003cli\u003eAssembly Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRasPiBox Pico Enclosure parts\u003c\/li\u003e\n\u003cli\u003eClear lid\u003c\/li\u003e\n\u003cli\u003eProto PCB\u003c\/li\u003e\n\u003cli\u003e2x 20-pin headers\u003c\/li\u003e\n\u003cli\u003e4x terminal blocks\u003c\/li\u003e\n\u003cli\u003eVoltage regulator parts kit\u003c\/li\u003e\n\u003cli\u003eFixings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included!\u003c\/strong\u003e\u003c\/p\u003e","brand":"Zihatec","offers":[{"title":"Default Title","offer_id":43643759657021,"sku":"tbr1789693454394","price":21.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/raspibox-pico-inc-5v-regulator-kit_1.jpg?v=1789693481"},{"product_id":"argon-pod-usb-lan-module","title":"Argon POD USB LAN Module","description":"\u003cp\u003eThe Argon \u003cstrong\u003ePOD USB LAN module\u003c\/strong\u003e is designed to be used with the modular Argon POD case for the Raspberry Pi Zero (sold separately) and adds an \u003cstrong\u003eEthernet LAN port\u003c\/strong\u003e alongside \u003cstrong\u003efour\u003c\/strong\u003e \u003cstrong\u003efull-size USB 2.0 ports\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: You will need \u003cspan style=\"text-decoration: underline;\"\u003etwo\u003c\/span\u003e other items to use this module:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eArgon POD Case\u003c\/li\u003e\n\u003cli\u003eArgon POD USB HDMI Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe POD USB LAN module simply clicks into your assembled POD case to improve and expand your connectivity options, giving your Zero four more USB ports and an Ethernet port for fast, reliable wired internet connections. The unit is Plug and Play and should be detected by Raspberry Pi OS.\u003c\/p\u003e\n\u003cp\u003eThe module continues the sleek look and feel of the POD system, matching the lines perfectly and providing an easy-to-use, seamless upgrade for your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther pod modules are sold separately \u003c\/strong\u003e(see below for info).\u003c\/p\u003e\n\u003ch2\u003eArgon POD System\u003c\/h2\u003e\n\u003cp\u003eThe Argon POD system allows you to seamlessly connect other POD modules to expand the capability of your Pi Zero\/project whilst maintaining the great looks of the case.\u003c\/p\u003e\n\u003cp\u003eTwo other Argon POD modules are currently available, as well as the core POD case, offering the following enhancements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nPOD USB HDMI - Converters the Zero's Mini-HDMI to full-size HDMI and offers an additional 3x USB 2.0 ports \u003cstrong\u003e(required when using the POD USB LAN Module)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\nPOD Display - Adds a 2.8\" LED capacitive touch display with 4 programmable buttons\u003c\/li\u003e\n\u003cli\u003ePOD UPS + RTC - \u003cem\u003eComing soon!\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note that your Raspberry Pi Zero will require headers to use the POD Display.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd-on module for the Argon POD case system\u003c\/li\u003e\n\u003cli\u003eAdds a 10\/100 Ethernet LAN port\u003c\/li\u003e\n\u003cli\u003eAdds four USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003eRTL8152B chipset\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x POD USB LAN module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther POD modules not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643767554109,"sku":"wbp1789694077917","price":16.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-pod-usb-lan-module_1.jpg?v=1789694084"},{"product_id":"argon-pod-28-capacitive-touch-display-module","title":"Argon POD 2.8\" Capacitive Touch Display Module","description":"\u003cp\u003eThe Argon \u003cstrong\u003ePOD 2.8\" Display module\u003c\/strong\u003e is designed to be used with the modular Argon POD case for the Raspberry Pi Zero (sold separately). It \u003cstrong\u003eadds a 2.8\" capacitive touch display, 4 user-programmable buttons and an IR receiver\u003c\/strong\u003e to your POD system!\u003c\/p\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou need \u003cspan style=\"text-decoration: underline;\"\u003etwo\u003c\/span\u003e other items \u003c\/strong\u003eto use this module:\n\u003cul\u003e\n\u003cli\u003eArgon POD Case\u003c\/li\u003e\n\u003cli\u003eArgon USB HDMI Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYour Pi Zero will require GPIO pins\u003c\/strong\u003e to use the POD display\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYou will need to install scripts\u003c\/strong\u003e to enable the POD display and configure the buttons\/display\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe POD 2.8\" Display module simply pushes onto your assembled Pod case (with USB HDMI module attached and soldered GPIO headers) to provide a compact display and four programmable buttons. An embedded IR receiver is also onboard for IR controls.\u003c\/p\u003e\n\u003cp\u003eThe module continues the sleek look and feel of the POD system, matching the lines perfectly and providing an easy-to-use, seamless upgrade for your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther pod modules are sold separately \u003c\/strong\u003e(see below for info).\u003c\/p\u003e\n\u003ch2\u003eCommunity Video\u003c\/h2\u003e\n\u003cp\u003eShows a complete working POD system with other POD modules (not included):\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/QWau3qywe6Q\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eArgon POD System\u003c\/h2\u003e\n\u003cp\u003eThe Argon POD system allows you to seamlessly connect other POD modules to expand the capability of your Pi Zero\/project whilst maintaining the great looks of the case.\u003c\/p\u003e\n\u003cp\u003eTwo other Argon POD modules are currently available, as well as the core POD case, offering the following enhancements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nPOD USB HDMI - Converters the Zero's Mini-HDMI to full-size HDMI and offers an additional 3x USB 2.0 ports \u003cstrong\u003e(required when using the POD Display Module)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\nPOD USB LAN - Provides an Ethernet LAN port and an additional 2x USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003ePOD UPS + RTC - \u003cem\u003eComing soon!\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd-on module for the Argon POD case system\u003c\/li\u003e\n\u003cli\u003eAdds a 2.8\" capacitive touch display\u003c\/li\u003e\n\u003cli\u003e320x240\u003c\/li\u003e\n\u003cli\u003eAdds four user-programmable buttons\u003c\/li\u003e\n\u003cli\u003eIR receiver**\u003c\/li\u003e\n\u003cli\u003eili9341 LCD driver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x POD 2.8\" Display Module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther POD modules not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643767652413,"sku":"sae1789694083631","price":31.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-pod-28-capacitive-touch-display-module_1.jpg?v=1789694088"},{"product_id":"gpi-case-2w","title":"GPi Case 2W","description":"\u003cp\u003eThe RetroFlag GPi Case 2W is the new version of the original Game Boy-inspired GPi case with a number of improvements such as the larger IPS display with a greater 640x480 resolution, built-in 2800mAh Li-ion battery and new turbo\/home buttons!\u003c\/p\u003e\n\u003cp\u003eThe GPi case 2W maintains the same great features as the original too, such as the handy power switch, L\/R rear 'shoulder' buttons, brightness adjustment wheel, 3.5mm headphone jack, built-in speaker, volume control and awesome cartridge mounting system for your Pi Zero. There's even a USB port for firmware upgrades! We almost forgot to mention the unmistakable retro styling - a true homage to the original.\u003c\/p\u003e\n\u003cp\u003eIt's the best GPi case yet, and it'll work with your Raspberry Pi Zero, Zero W and the latest Zero 2W (\u003cem\u003enaturally the Zero 2W will offer the best performance\u003c\/em\u003e). \u003cstrong\u003eYour Zero \u003cspan style=\"text-decoration: underline;\"\u003ecannot\u003c\/span\u003e have headers pre-soldered\u003c\/strong\u003e as the cases use pogo pins to connect to your board.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: for RetroPie and Recalbox, display patch installation is required to port HDMI display to GPIO for the case to work correctly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Zero and MicroSD card not included\u003c\/strong\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart your shipping options will be limited and may cost more than our usual rates. Why?\u0026lt;\u0026gt;\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGame Boy-inspired Raspberry Pi case\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi Zero, Zero W, Zero 2W (\u003cstrong\u003ewithout headers\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e3\" IPS screen\u003c\/li\u003e\n\u003cli\u003eBuilt-in 2800mAh Li-ion battery\u003c\/li\u003e\n\u003cli\u003e3.5mm audio port\u003c\/li\u003e\n\u003cli\u003eBuilt-in speaker\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003eSafe Shutdown\u003c\/li\u003e\n\u003cli\u003eLED power indicator\u003c\/li\u003e\n\u003cli\u003eTurbo and Home buttons\u003c\/li\u003e\n\u003cli\u003eL\/R shoulder buttons\u003c\/li\u003e\n\u003cli\u003eVolume control\u003c\/li\u003e\n\u003cli\u003eBrightness control\u003c\/li\u003e\n\u003cli\u003eUSB port for firmware upgrades\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCase dimensions: 134.63mm x 81.3mm x 31.72mm\u003c\/li\u003e\n\u003cli\u003eWeight: 230g\u003c\/li\u003e\n\u003cli\u003eScreen size: 3.0\" IPS\u003c\/li\u003e\n\u003cli\u003eBattery: 2800mAh Li-ion battery\u003c\/li\u003e\n\u003cli\u003eCompatibility\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Zero \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003ewithout headers\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Zero W \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003ewithout headers\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Zero 2W \u003cspan data-mce-fragment=\"1\"\u003e(\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003ewithout headers\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e)\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nResource page (covers all RetroFlag products)\u003c\/li\u003e\n\u003cli\u003eFor RetroPie and Recalbox, display patch installation is required to port HDMI display to GPIO for the case to work correctly.\u003c\/li\u003e\n\u003cli\u003eSafe Shutdown scripts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x GPi Case 2W\u003c\/li\u003e\n\u003cli\u003e1x 1m power cable\u003c\/li\u003e\n\u003cli\u003e1x Mini screwdriver\u003c\/li\u003e\n\u003cli\u003e1x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"RetroFlag","offers":[{"title":"Default Title","offer_id":43643767783485,"sku":"cgq1789694072159","price":71.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/gpi-case-2w_1.jpg?v=1789694101"},{"product_id":"argon-pod-usb-hdmi-module","title":"Argon POD USB HDMI Module","description":"\u003cp\u003eThe Argon \u003cstrong\u003ePOD USB HDMI module\u003c\/strong\u003e is designed to be used with the modular Argon POD case for the Raspberry Pi Zero (sold separately) and \u003cstrong\u003eadds two full-size USB ports\u003c\/strong\u003e whilst also \u003cstrong\u003econverting the Zero's mini-HDMI to full-size HDMI\u003c\/strong\u003e!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: You will need an Argon POD case to use this POD module!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe POD USB HDMI module simply clicks into your assembled POD case to improve and expand your connectivity options, giving your Zero the two USB ports you long for (hello keyboard and mouse!) and 'proper' HDMI (no more searching for Mini-HDMI cables)!\u003c\/p\u003e\n\u003cp\u003eThe module continues the sleek look and feel of the POD case, matching the lines perfectly and providing an easy-to-use, seamless upgrade for your project.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther POD modules are sold separately \u003c\/strong\u003e(see below for info).\u003c\/p\u003e\n\u003ch2\u003eArgon POD System\u003c\/h2\u003e\n\u003cp\u003eThe Argon POD system allows you to seamlessly connect other POD modules to expand the capability of your Pi Zero\/project whilst maintaining the great looks of the case.\u003c\/p\u003e\n\u003cp\u003eTwo other Argon POD modules are currently available, as well as the core POD case, offering the following enhancements:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nPOD USB LAN - Provides an Ethernet LAN port and an additional 2x USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003e\nPOD Display - Adds a 2.8\" LED capacitive touch display with 4 programmable buttons\u003c\/li\u003e\n\u003cli\u003ePOD UPS + RTC - \u003cem\u003eComing soon!\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003ePlease note that your Raspberry Pi Zero will require headers to use the POD Display.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eCommunity Video\u003c\/h2\u003e\n\u003cp\u003eThe following video reviews the \u003cem\u003eentire\u003c\/em\u003e POD system showing the POD case (sold separately) and POD USB HDMI module.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/suUoKnWHXCY?start=292\" height=\"315\" width=\"560\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd-on module for the Argon POD case system\u003c\/li\u003e\n\u003cli\u003eAdds two USB 2.0 ports\u003c\/li\u003e\n\u003cli\u003eConverts the Zero's mini-HDMI to full-size HDMI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x POD USB HDMI module\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOther POD modules not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643767881789,"sku":"rfp1789694106488","price":11.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-pod-usb-hdmi-module_1.jpg?v=1789694111"},{"product_id":"dip-pi-universal-solo-case-for-pico","title":"DiP-Pi Universal Solo Case for Pico","description":"\u003cp\u003eThe DiP-Pi Universal Solo is a case + prototyping PCB set for your Raspberry Pi Pico (not included), an easy and convenient way to create and house your Pico project whilst also having the ability to attach other Pico add-on boards on top!\u003c\/p\u003e\n\u003cp\u003eThe set includes a \u003cstrong\u003eblack aluminium profile enclosure with clear plastic top\u003c\/strong\u003e and laser-cut acrylic side panels, a \u003cstrong\u003ecustom proto PCB\u003c\/strong\u003e that your Pico slots into (no soldering required, depending on the application) \u003cstrong\u003eand fixings\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe prototyping PCB allows you to create your own circuit by soldering components directly to the board, using the unpopulated pads on the PCB. The pads directly next to each Pico pin are connected to that pin, giving you an easy hookup option. The transparent top cover allows you to see your circuit's components too - be it an LED, display or other components.\u003c\/p\u003e\n\u003cp\u003eAs the Pico's pins are pushed through the proto PCB, you can also attach other Pico add-on boards as well, as long as the add-on has dimensions within 34mm wide x 100mm long.\u003c\/p\u003e\n\u003cp\u003eDiP-Pi cases can be used as a stand-alone device or screwed to rails. \u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSimple Assembly - No Soldering Required!\u003c\/h3\u003e\n\u003cp\u003eAssembly of DiP-Pi cases is quick and easy:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFit your Pico to the PCB (no soldering required due to the grip-fit, however some applications may require soldering)\u003c\/li\u003e\n\u003cli\u003eFit one acrylic end to the aluminium profile and secure with 4 screws\u003c\/li\u003e\n\u003cli\u003eSlide the correct end of the PCB through the case, with the little PCB 'tongue' sliding into the acrylic to hold it in place\u003c\/li\u003e\n\u003cli\u003eLine up the other acrylic end panel, ensuring the other PCB 'tongue fits into the slot, then secure with 4 screws\u003c\/li\u003e\n\u003cli\u003eSlide the clear top cover into place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCase dimensions (Length\/Width\/height): 57mm x 43mm x 30mm\u003c\/li\u003e\n\u003cli\u003ePico HAT compatibility: Compatible with most Pico add-on boards with dimensions within 34mm wide x 100mm long\u003c\/li\u003e\n\u003cli\u003eMounting type: Standalone or rail mounting\u003c\/li\u003e\n\u003cli\u003eCase colour: Black\u003c\/li\u003e\n\u003cli\u003eTop cover colour: Transparent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Custom Proto PCB for Pico\u003c\/li\u003e\n\u003cli\u003e1x Aluminium profile enclosure\u003c\/li\u003e\n\u003cli\u003e1x Transparent top cover\u003c\/li\u003e\n\u003cli\u003e2x Acrylic side panels\u003c\/li\u003e\n\u003cli\u003e8x screws\u003c\/li\u003e\n\u003cli\u003eCut card (can be used for reassurance to avoid contact between PCB and metal case)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pimodules","offers":[{"title":"Default Title","offer_id":43643771748413,"sku":"emo1789694391417","price":8.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/dip-pi-universal-solo-case-for-pico_1.jpg?v=1789694397"},{"product_id":"dip-pi-universal-advanced-case-for-pico","title":"DiP-Pi Universal Advanced Case for Pico","description":"\u003cp\u003eThe DiP-Pi Universal Advanced is a \u003cstrong\u003ecase + add-on board set\u003c\/strong\u003e for your Raspberry Pi Pico (not included), an easy and convenient way to create and house an advanced Pico project whilst also having the ability to attach other Pico add-on boards on top!\u003c\/p\u003e\n\u003cp\u003eThe set includes a \u003cstrong\u003eblack aluminium profile enclosure with clear plastic top\u003c\/strong\u003e and laser-cut acrylic side panels which give access to your Pico's Micro-USB port, and a \u003cstrong\u003ecustom add-on board \u003c\/strong\u003ethat your Pico slots into, which includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo low-voltage relays\u003c\/li\u003e\n\u003cli\u003e1-wire interface\u003c\/li\u003e\n\u003cli\u003eGrove interface\u003c\/li\u003e\n\u003cli\u003e+\/-12V RS232 double driver 6-pin interface header\u003c\/li\u003e\n\u003cli\u003eTwo LEDs (one green, one red)\u003c\/li\u003e\n\u003cli\u003eEmbedded buzzer\u003c\/li\u003e\n\u003cli\u003eLight sensor interface (sensor not included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe custom add-on board offers a wide range of functionality applicable to many projects. The relay contacts are rated \u003cstrong\u003e1A 30VDC (2A max)\u003c\/strong\u003e, whilst the 1-wire and Grove interfaces allow the convenient adding of sensors and other devices. There's also a 12V RS232 double-driver interface! With all these features, combined with the feedback of the onboard LEDs and buzzer, you have everything you need for a complete project!\u003c\/p\u003e\n\u003cp\u003eThe transparent top cover allows you to see the add-on board LEDs, and provides light access if you decide to fit your own sensor to the interface pads. As the Pico's pins are pushed through the PCB, you can also attach other Pico add-on boards as well, as long as the add-on has dimensions within 34mm wide x 100mm long.\u003c\/p\u003e\n\u003cp\u003eDiP-Pi cases can be used as a stand-alone device or screwed to rails. \u003cstrong\u003eRaspberry Pi Pico not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSimple Assembly - No Soldering Required!\u003c\/h3\u003e\n\u003cp\u003eAssembly of DiP-Pi cases is quick and easy:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFit your Pico to the PCB (no soldering required due to the grip-fit, however some applications may require soldering)\u003c\/li\u003e\n\u003cli\u003eFit one acrylic end to the aluminium profile and secure with 4 screws\u003c\/li\u003e\n\u003cli\u003eSlide the correct end of the PCB through the case, with the little PCB 'tongue' sliding into the acrylic to hold it in place\u003c\/li\u003e\n\u003cli\u003eLine up the other acrylic end panel, ensuring the other PCB 'tongue fits into the slot, then secure with 4 screws\u003c\/li\u003e\n\u003cli\u003eSlide the clear top cover into place\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCase and add-on board set for the Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd-on board features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eTwo onboard \u003cstrong\u003e1A 30VDC\u003c\/strong\u003e relays \u003cstrong\u003e(not for mains usage!)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eTwo user-programmable LEDs (green and red)\u003c\/li\u003e\n\u003cli\u003e1-wire interface\u003c\/li\u003e\n\u003cli\u003eLight sensor interface (sensor not included)\u003c\/li\u003e\n\u003cli\u003eGrove interface\u003c\/li\u003e\n\u003cli\u003eEmbedded buzzer\u003c\/li\u003e\n\u003cli\u003eGrove interface header\u003c\/li\u003e\n\u003cli\u003e+\/-12V RS232 double driver 6-pin interface header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase features\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eBlack aluminium profile case\u003c\/li\u003e\n\u003cli\u003eAcrylic side panels\u003c\/li\u003e\n\u003cli\u003eClear top cover\u003c\/li\u003e\n\u003cli\u003eFixings included\u003c\/li\u003e\n\u003cli\u003eCan be used standalone or rail mounted\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRelay rating: 1A, 30VDC \u003cstrong data-mce-fragment=\"1\"\u003e(not for mains usage!)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eCase dimensions (Length\/Width\/height): 57mm x 43mm x 30mm\u003c\/li\u003e\n\u003cli\u003ePico HAT compatibility: Compatible with most Pico add-on boards with dimensions within 34mm wide x 100mm long\u003c\/li\u003e\n\u003cli\u003eMounting type: Standalone or rail mounting\u003c\/li\u003e\n\u003cli\u003eCase colour: Black\u003c\/li\u003e\n\u003cli\u003eTop cover colour: Transparent\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Custom Proto PCB for Pico\u003c\/li\u003e\n\u003cli\u003e1x Aluminium profile enclosure\u003c\/li\u003e\n\u003cli\u003e1x Transparent top cover\u003c\/li\u003e\n\u003cli\u003e2x Acrylic side panels\u003c\/li\u003e\n\u003cli\u003e8x screws\u003c\/li\u003e\n\u003cli\u003eCut card (can be used for reassurance to avoid contact between PCB and metal case)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSample\/Demo Software\u003c\/li\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eRelay datasheet\u003c\/li\u003e\n\u003cli\u003e6-pin connector datasheet\u003c\/li\u003e\n\u003cli\u003ePCB top view\u003c\/li\u003e\n\u003cli\u003ePCB bottom view\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimodules","offers":[{"title":"Default Title","offer_id":43643771879485,"sku":"tbp1789694403865","price":20.14,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/dip-pi-universal-advanced-case-for-pico_1.jpg?v=1789694408"},{"product_id":"aluminium-pi-4-nas-case-with-low-profile-ice-tower-cooler","title":"Aluminium Pi 4 NAS Case with Low-Profile ICE Tower Cooler","description":"\u003cp\u003eThis aluminium case for the Raspberry Pi 4 is 52Pi's answer to the usual wish list for an ultimate Raspberry Pi case - \u003cem\u003eincredible\u003c\/em\u003e cooling, SSD\/storage options, protection and great looks!\u003c\/p\u003e\n\u003cp\u003eThe case includes its own M.2 SATA SSD adapter board which allows you to add your own M.2 SATA SSD (SATA M.2 2280-format, \u003cstrong\u003enot NVME\u003c\/strong\u003e) for compact, high-volume storage or as a boot option. The adapter board connects to your Raspberry Pi 4 via the included USB-to-USB adapter, allowing a fast USB 3.0 connection.\u003c\/p\u003e\n\u003cp\u003eAlso included is a Low-Profile ICE Tower Cooler with a 3-pin fan allowing temperature control via Raspberry Pi OS! The case has been designed to perfectly accommodate this cooler. Cooling is further aided by the aluminium body of the case. The acrylic lid also includes vents to help with cooling and ensures wireless signals have a clear route.\u003c\/p\u003e\n\u003cp\u003eRubber anti-slip feet complete the enclosure, ensuring stability and minimal vibrations.\u003c\/p\u003e\n\u003cp\u003eWe also stock a shorter version with a standard fan + heatsink unit.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNVMA M.2 SSDs \u003cspan style=\"text-decoration: underline;\"\u003ecannot\u003c\/span\u003e be used in this case\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with WD Blue SSDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with 2TB SSDs (anything lower in capacity should work fine)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRemove the lid's protective film before assembling\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi and M.2 SSD are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAccommodates M.2 SATA SSDs\u003c\/li\u003e\n\u003cli\u003eAluminium case, acrylic top cover\u003c\/li\u003e\n\u003cli\u003eICE Tower Cooler\u003c\/li\u003e\n\u003cli\u003eTemperature-controlled fan\u003c\/li\u003e\n\u003cli\u003eAccess to all ports\u003c\/li\u003e\n\u003cli\u003eSlot for GPIO access via wires\u003c\/li\u003e\n\u003cli\u003eRubber anti-slip feet strips\u003c\/li\u003e\n\u003cli\u003eSupports M.2 SATA SSD B Key 2280 Only\u003c\/li\u003e\n\u003cli\u003eSupports Raspberry Pi 4 Model B Only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aluminum case\u003c\/li\u003e\n\u003cli\u003e1 x Acrylic Top cover\u003c\/li\u003e\n\u003cli\u003e1 x Aluminum bottom cover\u003c\/li\u003e\n\u003cli\u003e1 x 52Pi Mini M.2 SATA SSD Adapter board\u003c\/li\u003e\n\u003cli\u003e1 x USB adapter for the SSD adapter board\u003c\/li\u003e\n\u003cli\u003e1 x ICE Tower cooler\u003c\/li\u003e\n\u003cli\u003e2 x ICE Tower bracket\u003c\/li\u003e\n\u003cli\u003e4 x Copper pillar\u003c\/li\u003e\n\u003cli\u003e2 x M2.5 screws for ICE tower brackets\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Flat head screw\u003c\/li\u003e\n\u003cli\u003e2 x Thermal Pad\u003c\/li\u003e\n\u003cli\u003e1 x hex wrench\u003c\/li\u003e\n\u003cli\u003e4 x Hexagon socket head screw for the top cover\u003c\/li\u003e\n\u003cli\u003e2 x Rubber anti-slipper pad\u003c\/li\u003e\n\u003cli\u003e1 x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643781316669,"sku":"vdq1789695107189","price":36.47,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-pi-4-nas-case-with-low-profile-ice-tower-cooler_1.jpg?v=1789695111"},{"product_id":"aluminium-nas-case-for-pi-4-with-quiet-cooling-fan","title":"Aluminium NAS Case for Pi 4 with Quiet Cooling Fan","description":"\u003cp\u003eThis aluminium case for the Raspberry Pi 4 is 52Pi's answer to the usual wish list for an ultimate Raspberry Pi case - excellent cooling, SSD\/storage options, protection and great looks!\u003c\/p\u003e\n\u003cp\u003eThe case includes its own M.2 SATA SSD adapter board which allows you to add your own M.2 SATA SSD (SATA M.2 2280-format, \u003cstrong\u003enot NVME\u003c\/strong\u003e) for compact, high-volume storage or as a boot option. The adapter board connects to your Raspberry Pi 4 via the included USB-to-USB adapter, allowing a fast USB 3.0 connection.\u003c\/p\u003e\n\u003cp\u003eAlso included is a dedicated heatsink and 3-pin cooling fan, which efficiently and quietly cools your Raspberry Pi 4 and can be set to only turn on when a specified CPU temperature is reached (via Raspberry Pi OS). Cooling is further aided by the aluminium body of the case. The acrylic lid also includes vents to help with cooling and ensures wireless signals have a clear route.\u003c\/p\u003e\n\u003cp\u003eRubber anti-slip feet complete the enclosure, ensuring stability and minimal vibrations.\u003c\/p\u003e\n\u003cp\u003eWe also stock a taller version which comes with a low-profile ICE Tower cooler.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eNVMA M.2 SSDs \u003cspan style=\"text-decoration: underline;\"\u003ecannot\u003c\/span\u003e be used in this case\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with WD Blue SSDs\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot recommended for use with 2TB SSDs (anything lower in capacity should work fine)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eRemove the lid's protective film before assembling\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi and M.2 SSD are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAccommodates M.2 SATA SSDs\u003c\/li\u003e\n\u003cli\u003eAluminium case, acrylic top cover\u003c\/li\u003e\n\u003cli\u003eQuiet temperature-controlled cooling fan \u0026amp; heatsink\u003c\/li\u003e\n\u003cli\u003eAccess to all ports\u003c\/li\u003e\n\u003cli\u003eSlot for GPIO access via wires\u003c\/li\u003e\n\u003cli\u003eRubber anti-slip feet strips\u003c\/li\u003e\n\u003cli\u003eSupports M.2 SATA SSD B Key 2280 Only\u003c\/li\u003e\n\u003cli\u003eSupports Raspberry Pi 4 Model B Only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Aluminum NAS case\u003c\/li\u003e\n\u003cli\u003e1 x Quiet cooling fan + heatsink unit\u003c\/li\u003e\n\u003cli\u003e1 x Acrylic Top cover\u003c\/li\u003e\n\u003cli\u003e1 x Aluminum bottom cover\u003c\/li\u003e\n\u003cli\u003e1 x 52Pi Mini M.2 SATA SSD Adapter board\u003c\/li\u003e\n\u003cli\u003e1 x USB adapter for the SSD adapter board\u003c\/li\u003e\n\u003cli\u003e4 x Copper pillar\u003c\/li\u003e\n\u003cli\u003e2 x M2.5 nut\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Flat head screw\u003c\/li\u003e\n\u003cli\u003e2 x Thermal Pad\u003c\/li\u003e\n\u003cli\u003e1 x Hex wrench\u003c\/li\u003e\n\u003cli\u003e4 x Hexagon socket head screw for the top cover\u003c\/li\u003e\n\u003cli\u003e2 x Rubber anti-slipper pad\u003c\/li\u003e\n\u003cli\u003e1 x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643781480509,"sku":"wkt1789695119680","price":36.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-nas-case-for-pi-4-with-quiet-cooling-fan_1.jpg?v=1789695125"},{"product_id":"uctronics-complete-enclosure-for-raspberry-pi-clusters-v30","title":"Uctronics Complete Enclosure for Raspberry Pi Clusters V3.0","description":"\u003cp\u003eThe Uctronics Raspberry Pi Cluster Complete Enclosure V3.0 is upgraded from the previous version of the enclosure (U6243).\u003c\/p\u003e\n\u003cp\u003eIt's designed to provide a desktop hardware solution for an array of Raspberry Pi Model B boards. The compact case reserves enough space for 4x RPis, 4x 2.5” SSDs, and an Ethernet switch, as well as the 2x included cooling fans. You can also fit the official Raspberry Pi PoE+ HAT on your boards!\u003c\/p\u003e\n\u003cp\u003eEach Raspberry Pi mounting bracket is independent and can be removed just by unscrewing the two captive loose-off screws. The larger opening at the back panel allows you to use more models of switches than the previous model too!\u003c\/p\u003e\n\u003cp\u003eUctronics have added a fan adapter board in this version. You can power the fan at the same time. The 8cm fan provides a stable temperature environment for your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eUSB SATA adapters will be required to use your SSDs with the Raspberry Pis.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFull assembly required! Raspberry Pis, SSDs and adapters not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eImprovements\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eYou can now power your fans while using a PoE HAT\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi official PoE+ HAT and Uctronics Mini PoE HAT (U6241)\n\u003c\/li\u003e\n\u003cli\u003eReplaced the thumbscrews with captive loose-off screws on the mounting brackets, which greatly improves the stability of the brackets\u003c\/li\u003e\n\u003cli\u003eFront and back panel openings are expanded to support more models of switches\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide compatibility\u003c\/strong\u003e - Designed to house 4x Raspberry Pi 4B, 3B+\/3B, or other B models, 4x 2.5” SSDs and an Ethernet switch. You can use it as a complete desktop NAS. It also has holes reserved for the optional SD card extension adapter (U6192) which allows you to access the SD card from the front of the case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront Removable\u003c\/strong\u003e - Each baseplate is independent so as to easily slide in and out, just fixed with captive loose-off screws, allowing you very convenient and quick access to each node within the cluster for maintenance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplications\u003c\/strong\u003e - This is the perfect solution for building Pi Array, Pi NAS, Pi LAN lab or other projects that need to organize your Raspberry Pis in a manageable way.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e6x Mounting panel\u003c\/li\u003e\n\u003cli\u003e4x Foot pads\u003c\/li\u003e\n\u003cli\u003e2x 8cm Cooling fans\u003c\/li\u003e\n\u003cli\u003e8x M5*10 screws for fans\u003c\/li\u003e\n\u003cli\u003e1x Fan adapter (more available here if required)\u003c\/li\u003e\n\u003cli\u003e4x Raspberry Pi mounting bracket with captive loose-off screws\u003c\/li\u003e\n\u003cli\u003e4x Framework parts\u003c\/li\u003e\n\u003cli\u003e16x M2.5*5 screws for Raspberry Pis\u003c\/li\u003e\n\u003cli\u003e16x M3*5 screws for SSDs\u003c\/li\u003e\n\u003cli\u003e32x M3*5 screws for framework\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pis, SSDs and adapters not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eManual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Uctronics","offers":[{"title":"Default Title","offer_id":43643788886077,"sku":"tnv1789695396806","price":75.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/uctronics-complete-enclosure-for-raspberry-pi-clusters-v30_1.jpg?v=1789695406"},{"product_id":"uctronics-19-1u-raspberry-pi-rack-mount-with-ssd-mounting-brackets-holds-4x-rpi","title":"Uctronics 19\" 1U Raspberry Pi Rack Mount with SSD Mounting Brackets (Holds 4x RPi)","description":"\u003cp\u003eThe Uctronics 1U Rack Mount is designed to house \u003cstrong\u003efour\u003c\/strong\u003e Raspberry Pi boards and \u003cstrong\u003efour\u003c\/strong\u003e 2.5” SSDs (7mm thickness).\u003c\/p\u003e\n\u003cp\u003eYour boards and SSDs are mounted in the 19\" standard 1U rack, which provides a hardware solution to optimise your workspace for a Raspberry Pi cluster, home media server, home automation system and many more projects!\u003c\/p\u003e\n\u003cp\u003eWith 8 thumbscrews, each Raspberry Pi can be removed from the front without taking everything apart for maintenance. House up to four SSDs (you will need SSD USB adapter cables to connect them to your Raspberry Pis).\u003c\/p\u003e\n\u003cp\u003eThe rack is made of 1.2mm carbon steel with a matte black powder-coated finish (plate corners are rounded off smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: the delivered product may not have white text on the front of the unit as displayed in the images.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi boards, SSDs and adapters are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesign for Raspberry Pi: Supports installation of 4 Raspberry Pis and 4 SSDs, compatible with any 2.5” Solid State Drive (7mm\/9mm) and RPi 4B\/3B+, and other B\/B+ models\u003c\/li\u003e\n\u003cli\u003eThe SSD mounting bracket also has two holes reserved for the optional SD card extension adapter, which allows you to access the SD card from the front of the rack\u003c\/li\u003e\n\u003cli\u003eEasy to Setup: Just use two included thumbscrews to mount the rackmount, which adopts a screw-in design, which helps you install and replace quickly and easily\u003c\/li\u003e\n\u003cli\u003eApplications: This is a hardware solution to get ingenious use of the Raspberry Pi, with this kit and open source software OpenMediaVault, you can use the Pi as a NAS Server, Surveillance station, or even a Web server\u003c\/li\u003e\n\u003cli\u003eOptional accessories:\n\u003cul\u003e\n\u003cli\u003e\nMicro SD card extension adapter. The Raspberry Pi bracket has an opening cut specifically for this adapter, allowing you to access the SD card from the front without having to remove the mounting plate and Raspberry Pi.\u003c\/li\u003e\n\u003cli\u003eCompatible with the Uctronics Mini POE HAT\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Full metal, aluminium alloy\u003c\/li\u003e\n\u003cli\u003eSize: 19\" x 1.75\"\u003c\/li\u003e\n\u003cli\u003eWe also stock a 5-board version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 1U Rackmount\u003c\/li\u003e\n\u003cli\u003e4x Raspberry Pi mounting brackets\u003c\/li\u003e\n\u003cli\u003e8x M4 thumbscrews\u003c\/li\u003e\n\u003cli\u003e16x M2.5x5 countersunk screws\u003c\/li\u003e\n\u003cli\u003e16x SSD screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi boards, SSDs and adapters are not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Uctronics","offers":[{"title":"Default Title","offer_id":43643788951613,"sku":"rzz1789695402711","price":51.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/uctronics-19-1u-raspberry-pi-rack-mount-with-ssd-mounting-brackets-holds-4x-rpi_1.jpg?v=1789695409"},{"product_id":"uctronics-19-1u-raspberry-pi-rack-mount-with-ssd-mounting-brackets-holds-5x-rpi","title":"Uctronics 19\" 1U Raspberry Pi Rack Mount with SSD Mounting Brackets (Holds 5x RPi)","description":"\u003cp\u003eThe Uctronics 1U Rack Mount is designed to house \u003cstrong\u003efive\u003c\/strong\u003e Raspberry Pi boards and \u003cstrong\u003efive\u003c\/strong\u003e 2.5” SSDs (7mm thickness).\u003c\/p\u003e\n\u003cp\u003eYour boards and SSDs are mounted in the 19\" standard 1U rack, which provides a hardware solution to optimise your workspace for a Raspberry Pi cluster, home media server, home automation system and many more projects!\u003c\/p\u003e\n\u003cp\u003eWith 10 thumbscrews, each Raspberry Pi can be removed from the front without taking everything apart for maintenance. House up to five SSDs (you will need SSD USB adapter cables to connect them to your Raspberry Pis).\u003c\/p\u003e\n\u003cp\u003eThe rack is made of 1.2mm carbon steel with a matte black powder-coated finish (plate corners are rounded off smooth).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi boards, SSDs and adapters are not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes not work with 9mm SSDs!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesign for Raspberry Pi: Supports installation of 5 Raspberry Pis and 5 SSDs, compatible with any 2.5” Solid State Drive (\u003cstrong\u003e7mm only\u003c\/strong\u003e) and RPi 4B\/3B+, and other B\/B+ models\u003c\/li\u003e\n\u003cli\u003eThe SSD mounting bracket also has two holes reserved for the optional SD card extension adapter, which allows you to access the SD card from the front of the rack\u003c\/li\u003e\n\u003cli\u003eEasy to Setup: Just use two included thumbscrews to mount the rackmount, which adopts a screw-in design, which helps you install and replace quickly and easily\u003c\/li\u003e\n\u003cli\u003eApplications: This is a hardware solution to get ingenious use of the Raspberry Pi, with this kit and open source software OpenMediaVault, you can use the Pi as a NAS Server, Surveillance station, or even a Web server\u003c\/li\u003e\n\u003cli\u003eOptional accessories:\n\u003cul\u003e\n\u003cli\u003e\nMicro SD card extension adapter. The Raspberry Pi bracket has an opening cut specifically for this adapter, allowing you to access the SD card from the front without having to remove the mounting plate and Raspberry Pi.\u003c\/li\u003e\n\u003cli\u003eCompatible with the Uctronics Mini POE HAT\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Full metal, aluminium alloy\u003c\/li\u003e\n\u003cli\u003eSize: 19\" x 1.75\"\u003c\/li\u003e\n\u003cli\u003eWe also stock a 4-board version\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x 1U Rackmount\u003c\/li\u003e\n\u003cli\u003e5x Raspberry Pi mounting brackets\u003c\/li\u003e\n\u003cli\u003e10x M4 thumbscrews\u003c\/li\u003e\n\u003cli\u003e20x M2.5x5 countersunk screws\u003c\/li\u003e\n\u003cli\u003e20x SSD screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi boards, SSDs and adapters are not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Uctronics","offers":[{"title":"Default Title","offer_id":43643789049917,"sku":"ypy1789695422111","price":54.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/uctronics-19-1u-raspberry-pi-rack-mount-with-ssd-mounting-brackets-holds-5x-rpi_1.jpg?v=1789695426"},{"product_id":"raspberry-pi-5-case","title":"Raspberry Pi 5 Case","description":"\u003cp\u003eThe official Raspberry Pi 5 case is a refinement of the Raspberry Pi 4 case, with a number of improvements and thermal features to accommodate the footprint and peak power consumption of Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eFollowing the same easy-to-assemble snap-together design, the case now includes an internal PWM fan for use with the dedicated fan connector on the Raspberry Pi 5, with a heatsink included, too. Vents in the base, as well as a slim gap below the lid, also ensure airflow is unrestricted. This combination of active and passive thermal measures ensures your board stays cool even with the most demanding projects\u003c\/p\u003e\n\u003cp\u003ePop the lid off and you'll find the removable clear fan insert, which includes cut-outs to access your GPIO pins as well as corner slots to attach standoffs. With the clear insert removed, you can fit HATs perfectly into the gap, allowing you to expand the use of your Raspberry Pi 5 without removing the protection that the case offers.\u003c\/p\u003e\n\u003cp\u003eThe new power button on the Raspberry Pi 5 is accessible with a clever, clear 2-in-1 button and activity LED button. An access section has been added for swapping out your Micro-SD card, whilst soft feet ensure your projects stay put on your desk, avoiding damage to the surface. Stacking cases is an option with the addition of your own standoffs\/screws.\u003c\/p\u003e\n\u003cp\u003eThe case comes in the familiar signature red\/white or black colours, the former matching the popular range of Raspberry Pi accessories such as the official Raspberry Pi keyboard and mouse set.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/YgtdYf3qegA?si=K1UvR8w0iYbtiki6\u0026amp;start=818\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSnap-together design - no tools required\u003c\/li\u003e\n\u003cli\u003eOffers access to all major ports and GPIO pins\u003c\/li\u003e\n\u003cli\u003ePower button access with activity LED visibility\u003c\/li\u003e\n\u003cli\u003eIncluded PWM fan with Pi5 fan connector\u003c\/li\u003e\n\u003cli\u003eVentilated for optimal airflow\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eHeatsink included\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eHAT insert (holds fan) with embossed Raspberry Pi logo\u003c\/li\u003e\n\u003cli\u003eStackable with standoffs\u003c\/li\u003e\n\u003cli\u003eSoft feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Official Raspberry Pi 5 case (includes fan, heatsink and soft feet) - \u003cstrong\u003eselect a colour before adding to cart\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eThis case does not come with screws as they are not required. \u003c\/strong\u003eYour Raspberry Pi 5 will slot into place and rest in the case, held in place by the features around the board. The holes are there to add your own standoffs and spacers, which allow you to stack other cases\/HATs.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and other accessories not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEAN:\n\u003cul\u003e\n\u003cli\u003eWhite\/Red: 5056561803340\u003c\/li\u003e\n\u003cli\u003eBlack\/Grey: 5056561803746\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSKU:\n\u003cul\u003e\n\u003cli\u003eWhite\/Red: SC1159\u003c\/li\u003e\n\u003cli\u003eBlack\/Grey: SC1160\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Red\/White","offer_id":43643806580797,"sku":"hwb1789696088759","price":9.96,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":43643806613565,"sku":"hba1789696088760","price":9.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/raspberry-pi-5-case_1.jpg?v=1789696095"},{"product_id":"abs-fan-case-for-raspberry-pi-5","title":"ABS Fan Case for Raspberry Pi 5","description":"\u003cp\u003eThis case for Raspberry Pi 5 features a customisable strip-pattern ventilation design, not only adding a touch of style but also promoting effective heat dissipation. The decorative strip on top of the case can be replaced to get the look you want (three colour strips are included!). It's made from high-quality ABS, offering protection against physical impacts.\u003c\/p\u003e\n\u003cp\u003eThe case \u003cstrong\u003eincludes\u003c\/strong\u003e an Armour Lite V5 heatsink, enhancing the case's cooling efficiency. This means even when your Raspberry Pi 5 is under a heavy workload, it remains cool and stable. The heatsink's fan has a JST-interface for the dedicated Raspberry Pi 5 fan header, allowing software fan control and keeps your GPIO pins free for your project at the same time.\u003c\/p\u003e\n\u003cp\u003eThis case is available in black or white, \u003cstrong\u003eplease select a colour before purchasing.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour Options\u003c\/strong\u003e: Choose between classic black or pristine white to complement your style and surroundings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePerfect Fit\u003c\/strong\u003e: Designed specifically for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilation Design\u003c\/strong\u003e: Stylish strip-patterned ventilation holes for effective heat dissipation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact and Cool\u003c\/strong\u003e: The compact design and horizontal heatsink contribute to efficient cooling, even under heavy workloads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCooling Fan\u003c\/strong\u003e: Equipped with a JST interface for the Pi 5 fan header. The fan supports software speed adjustment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 150g\u003c\/li\u003e\n\u003cli\u003eCase size: H: 31mm x L: 94mm x W: 63mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x ABS case for Raspberry Pi 5 (\u003cstrong\u003eselect colour before adding to cart\u003c\/strong\u003e)\u003c\/li\u003e\n\u003cli\u003e1x Heat sink with adjustable speed fan\u003c\/li\u003e\n\u003cli\u003e4x Nylon screws for the heat sink\u003c\/li\u003e\n\u003cli\u003e4x M2.5 Self-tapping screw\u003c\/li\u003e\n\u003cli\u003e10x Thermal pads\u003c\/li\u003e\n\u003cli\u003e3x Colour strips\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"52Pi","offers":[{"title":"Black","offer_id":43643808809021,"sku":"taz1789696206034","price":12.53,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":43643808841789,"sku":"zsg1789696206035","price":14.15,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/abs-fan-case-for-raspberry-pi-5_1.jpg?v=1789696210"},{"product_id":"pibow-coupe-5-case-for-raspberry-pi-5","title":"Pibow Coupe 5 (Case for Raspberry Pi 5)","description":"\u003cp\u003eHere at Pirate Towers, we happen to think that plugging a bunch of fun stuff into a Raspberry Pi is the best thing ever, so we designed a protective case that will let you do that easily.\u003c\/p\u003e\n\u003cp\u003ePibow 5 lets you access all the ports and connectors on your Pi and even has a clever little tab that will let you push the Pi 5's brand-new power button whilst it's safely ensconced in its case. The case is designed to fit neatly around Raspberry Pi's new Active Cooler.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote that the Raspberry Pi 5 and Active Cooler are NOT included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 only \u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 Official Active Cooler\n\u003c\/li\u003e\n\u003cli\u003eSuper-slimline profile\u003c\/li\u003e\n\u003cli\u003eFully HAT\/pHAT compatible\u003c\/li\u003e\n\u003cli\u003eProtects your beloved Pi 5!\u003c\/li\u003e\n\u003cli\u003eThe clear top leaves Raspberry Pi 5 visible (so you can gaze upon its wonder).\u003c\/li\u003e\n\u003cli\u003eGPIO cut-out\u003c\/li\u003e\n\u003cli\u003eLeaves all ports and connectors accessible\u003c\/li\u003e\n\u003cli\u003eExternal Power Button Nubbin via compliant mechanism magic\u003c\/li\u003e\n\u003cli\u003eMounting holes on the base that will accommodate M2.5 screws\/bolts and the studs on popular Danish ABS construction blocks\u003c\/li\u003e\n\u003cli\u003eMade from light-weight high-quality cast acrylic\u003c\/li\u003e\n\u003cli\u003eGreat for hacking and tinkering!\u003c\/li\u003e\n\u003cli\u003eMade in Sheffield, UK\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCrafted out of five unique layers including a transparent top that leaves your beautiful Pi visible inside. Each layer is laser-cut from colourful high-quality cast acrylic and once stacked they securely contain a Raspberry Pi 5 while leaving the primary ports and GPIO accessible.\u003c\/p\u003e\n\u003cp\u003eThis case is lightweight and ideal for mounting to any surface. No tools are required for assembly or disassembly!\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding you Pibow 5\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Rainbow","offer_id":43643809038397,"sku":"eid1789696228286","price":8.27,"currency_code":"USD","in_stock":true},{"title":"Royale","offer_id":43643809071165,"sku":"skg1789696228287","price":8.8,"currency_code":"USD","in_stock":true},{"title":"Ninja","offer_id":43643809103933,"sku":"poc1789696228288","price":9.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pibow-coupe-5-case-for-raspberry-pi-5_1.jpg?v=1789696233"},{"product_id":"kksb-black-aluminium-case-for-rasperry-pi-5","title":"KKSB Black Aluminium Case for Rasperry Pi 5","description":"\u003cp\u003eThis case is a practical and durable choice for Raspberry Pi 5 users. It's compatible with the official Raspberry Pi cooler and made from sturdy, laser-cut, aluminium.\u003c\/p\u003e\n\u003cp\u003eThe case has mounting holes for easy wall installation and a QR code for quick assembly instructions. GPIO pins are clearly labelled on the top lid, and the design includes ample ventilation for cooling.\u003c\/p\u003e\n\u003cp\u003eIt comes with rubber feet to ensure the case stays in place and prevents slipping, and the case is structured for convenient access to essential connectors and functions. An integrated start button adds to its functionality, making it a convenient, efficient option.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: \u003cstrong\u003eRaspberry Pi 5 not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh-Quality Material\u003c\/li\u003e\n\u003cli\u003eEasy Wall Mounting\u003c\/li\u003e\n\u003cli\u003eSimple Assembly\u003c\/li\u003e\n\u003cli\u003eClearly Labelled GPIO Pins\u003c\/li\u003e\n\u003cli\u003eEnhanced Ventilation\u003c\/li\u003e\n\u003cli\u003eIntegrated Start Button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAccessory Support (Not Included)\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eKKSB DIN Rail Clip\u003c\/li\u003e\n\u003cli\u003eKKSB Tripod Mount Bracket\u003c\/li\u003e\n\u003cli\u003eKKSB Camera Holder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x KKSB Raspberry Pi 5 Case\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFasteners\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643809202237,"sku":"fqz1789696240769","price":11.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-black-aluminium-case-for-rasperry-pi-5_1.jpg?v=1789696245"},{"product_id":"metal-case-with-40mm-cooling-fan-for-raspberry-pi-5","title":"Metal Case with 40mm Cooling Fan for Raspberry Pi 5","description":"\u003cp\u003e\u003cspan\u003eThis strong metal case is a practical solution for protecting and cooling your Raspberry Pi 5.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe case includes a 4010 cooling fan and copper heatsinks to ensure efficient heat management. The fan has a 4-pin JST connector for using with the Raspberry Pi 5 fan header, keeping your GPIO pins free for your project. Its adjustable speed feature allows for customisable cooling based on your usage needs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThis case is a reliable option for safeguarding and cooling your Raspberry Pi 5 while maintaining its performance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi 5 is \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eCompatible with Raspberry Pi 5\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIncluded fan with JST connector for the Pi 5 fan header\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEasy to assemble\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTough metal case\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eCopper heat sinks\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAdjustable speed fan\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 210g\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: H: 40mm x L: 92mm x W: 66m\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Metal Case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e1x Adjustable Speed Fan with JST header\u003c\/li\u003e\n\u003cli\u003e4x M2.5 Nuts \u003c\/li\u003e\n\u003cli\u003e4x M2.5 Ball Head Screws\u003c\/li\u003e\n\u003cli\u003e4x Copper Pillar\u003c\/li\u003e\n\u003cli\u003e4x Hand Tightened Copper Nut\u003c\/li\u003e\n\u003cli\u003e8x M2.5 Screws for Case\u003c\/li\u003e\n\u003cli\u003e1x M2.5 Screw Driver\u003c\/li\u003e\n\u003cli\u003e4x Transparent Anti-Slip Rubber Feet\u003c\/li\u003e\n\u003cli\u003e4x Copper Heat Sinks\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643809235005,"sku":"caj1789696241332","price":18.68,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/metal-case-with-40mm-cooling-fan-for-raspberry-pi-5_1.jpg?v=1789696245"},{"product_id":"argon-neo-5-m2-nvme-case-for-raspberry-pi-5","title":"Argon NEO 5 M.2 NVME Case for Raspberry Pi 5","description":"\u003cp\u003eThis case offers the same great features and style as the standard NEO 5 but with the addition of \u003cstrong\u003eM.2 NVME support\u003c\/strong\u003e (drive not included) allowing you to add lots of fast storage to your Raspberry Pi 5 via the PCI-E header!\u003c\/p\u003e\n\u003cp\u003eThe lower section of the case \u003cstrong\u003eaccepts any M.2 NVME SSD with M-Key up to 2280 size\u003c\/strong\u003e \u003cem\u003e(not included)\u003c\/em\u003e, and even has an included aluminium heatsink to keep your drive cool.\u003c\/p\u003e\n\u003cp\u003eJust like the standard NEO 5, the case has a smooth aluminium alloy main body with both active and passive cooling for the ultimate cooling\/quiet combo.  The case also gives access to all ports including the power button.\u003c\/p\u003e\n\u003cp\u003eWith a 30mm internal PWM blower fan, combined with intake and exhaust vents, you can push your Pi 5 to the max and let the case handle cooling when it's needed. When you're not pushing things to the limits, the fan will turn off and allow the passive cooling features to take over, keeping your environment quiet.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e You will need to use an official 27W Raspberry Pi power supply with this case to ensure sufficient power for the Pi, case and NVMe drive.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives. Whilst no 'official' compatibility list is maintained by Argon40 (yet),\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewe have made them aware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003ediscussions on their own forum\u003cspan\u003e \u003c\/span\u003eare highlighting the need for clarification.\u003c\/p\u003e\n\u003cp\u003eFor now,\u003cspan\u003e \u003c\/span\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared from Argon40. Please also read our troubleshooting guide.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease also note that \u003cstrong\u003edouble-sided NVME drives will not fit this product\u003c\/strong\u003e (usually found with higher-capacity drives with components on both sides of the stick).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned specifically for Raspberry Pi 5 by Argon Forty\n\u003c\/li\u003e\n\u003cli\u003eM.2 NVME support - compatible with any M.2 NVME with M-Key up to 2280 size\u003c\/li\u003e\n\u003cli\u003eBoot your Raspberry Pi 5 from an NVME M.2 Drive \u003cem\u003e(drive not included)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in heatsink for your M.2 NVME Drive\u003c\/li\u003e\n\u003cli\u003eEnjoy faster storage by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eGreater thermal management for the M.2 NVME drive with the included aluminium heatsink\u003c\/li\u003e\n\u003cli\u003eReliable and consistent data transfer with included FPC impedance-controlled cable\u003c\/li\u003e\n\u003cli\u003eMade with aluminium alloy and a polished black finish\u003c\/li\u003e\n\u003cli\u003eThe metal case acts as passive cooling for the high demands of the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eAssembling the case with the Raspberry Pi is easy\u003c\/li\u003e\n\u003cli\u003eEasy to bring anywhere with the case's small form factor\u003c\/li\u003e\n\u003cli\u003eScrew on top cover to keep the ports safe when not in use\u003c\/li\u003e\n\u003cli\u003eAll the ports of the Raspberry Pi 5 are available while keeping the Pi safe\u003c\/li\u003e\n\u003cli\u003e30mm internal PWM blower fan\u003c\/li\u003e\n\u003cli\u003ePassive cooling fins and exhaust vents\u003c\/li\u003e\n\u003cli\u003eSide air intake vents\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003cli\u003eArgon40 Forum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Argon NEO 5 case\u003c\/li\u003e\n\u003cli\u003e1x M.2 NVME PCIE Board\u003c\/li\u003e\n\u003cli\u003e1x Screw pack\u003c\/li\u003e\n\u003cli\u003eThermal compund\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643810152509,"sku":"kpr1789696301608","price":37.05,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-neo-5-m2-nvme-case-for-raspberry-pi-5_1.jpg?v=1789696307"},{"product_id":"argon-one-v3-raspberry-pi-5-case","title":"Argon ONE V3 Raspberry Pi 5 Case","description":"\u003cp\u003eThe \u003cstrong\u003eArgon ONE V3\u003c\/strong\u003e is the latest in the popular ONE family of cases from Argon Forty, this time for Raspberry Pi 5! With upgraded features, a new all-black finish and the classic Argon ONE style you know and love, this is likely going to be one of our best-selling cases for the Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eAs you would expect from any ONE case, cable management and temperature are more than covered, with both passive and active (PWM 30mm blower fan) cooling keeping your Pi 5 board cool, and all ports re-routed to the back of the case - including two full-size HDMI ports and a power button. There's also a magnetic cover which allows access to colour-coded GPIO pins for your projects.\u003c\/p\u003e\n\u003cp\u003eThe Argon ONE V3 includes a built-in IR receiver which can be used with an Argon IR remote (available separately) to make the most of popular operating systems such as \u003cspan\u003eRaspberry Pi OS or \u003c\/span\u003eLibreELEC\u003cspan\u003e (Kodi).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAn \u003cstrong\u003eoptional\u003c\/strong\u003e DAC accessory is also available, offering full high definition 24-bit 192kHz audio from your Raspberry Pi 5!\u003c\/p\u003e\n\u003cp\u003eWe also stock the M.2 NVME PCIE Expansion Board to add NVME M.2 storage capability to this case (or just grab the Argon ONE V3 M.2 NVME Raspberry Pi 5 Case!)\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon ONE V3 Case \u003cstrong\u003efor Raspberry Pi 5\u003c\/strong\u003e with \u003cstrong\u003eupgraded features\u003c\/strong\u003e and a \u003cstrong\u003enew all-black finish\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter active cooling\u003c\/strong\u003e with a blower-type PWM programmable 30mm fan, repositioned within the case to be quieter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved passive cooling\u003c\/strong\u003e with the addition of a heatsink on the power management chip of the Raspberry Pi 5 aside from its CPU, which both get hot during heavy use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter communication and power management\u003c\/strong\u003e with the Raspberry Pi 5 via a Raspberry Pi RP2040 chip, which controls the features and functions of the Argon ONE V3 such as fan speed, power management state (e.g. boot manually or automatically after a power outage by simply setting the jumper pins inside the case) allowing you to use the Argon ONE however you see fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower button located at the back\u003c\/strong\u003e can perform the following (with the installation of an open sourced script) safe shutdown, reboot and forced shutdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent cable management\u003c\/strong\u003e with \u003cstrong\u003etwo full-sized HDMI ports\u003c\/strong\u003e neatly placed at the back allows the Raspberry Pi 5 to use two monitors simultaneously\u003c\/li\u003e\n\u003cli\u003eFlush \u003cstrong\u003emagnetic cover\u003c\/strong\u003e to the access port of the \u003cstrong\u003ecustom colour-coded GPIO pins\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in IR receiver\u003c\/strong\u003e allows the Argon ONE V3 to be easily usable with the Argon IR remote \u003cem\u003e(not included)\u003c\/em\u003e making the case an even better media player\u003c\/li\u003e\n\u003cli\u003eEnjoy using your audio accessories with the optional 3.5mm audio jack via the internal DAC audio board upgrade \u003cem\u003e(not included, coming soon)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nArgon Wiki\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Argon ONE Pi 5 V3 Case\u003c\/li\u003e\n\u003cli\u003e1x Video \/ Audio PCB extender\u003c\/li\u003e\n\u003cli\u003e1x GPIO - Fan power Board\u003c\/li\u003e\n\u003cli\u003eSilicon thermal pads\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643810250813,"sku":"tzu1789696310649","price":22.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-one-v3-raspberry-pi-5-case_1.jpg?v=1789696315"},{"product_id":"argon-neo-5-m2-nvme-expansion-board","title":"Argon NEO 5 M.2 NVME Expansion Board","description":"\u003cp\u003eIf you've already bought an Argon NEO 5 case for your Raspberry Pi 5, but now you want to add some fast M.2 NVME storage to it - this expansion board is for you!\u003c\/p\u003e\n\u003cp\u003eThis expansion board effectively converts your standard Argon NEO 5 case into a NEO 5 M.2 NVME case. \u003cstrong\u003eOnly the lower section (and heatsink) are included\u003c\/strong\u003e - you'll need to add your own NEO 5 case and M.2 NVME drive (and a Raspberry Pi 5 of course!).\u003c\/p\u003e\n\u003cp\u003eThe expansion works with any M.2 NVME with M-Key up to 2280 size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou will need to use an official 27W Raspberry Pi power supply\u003cspan\u003e \u003c\/span\u003ewith this case addition, to ensure sufficient power for the Pi, case and NVMe drive.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives. Whilst no 'official' compatibility list is maintained by Argon40 (yet),\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewe have made them aware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003ediscussions on their own forum\u003cspan\u003e \u003c\/span\u003eare highlighting the need for clarification.\u003c\/p\u003e\n\u003cp\u003eFor now,\u003cspan\u003e \u003c\/span\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared from Argon40. \u003cspan\u003ePlease also read our \u003c\/span\u003etroubleshooting guide\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease also note that \u003cstrong\u003edouble-sided NVME drives will not fit this product\u003c\/strong\u003e (usually found with higher-capacity drives with components on both sides of the stick).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion\/add-on for the Argon NEO 5 case \u003cstrong\u003e(main case body not included!)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConverts a NEO 5 case to a NEO 5 M.2 NVME case\u003c\/li\u003e\n\u003cli\u003eTakes your NEO 5 to another level with M.2 NVME drive expansion capabilities\u003c\/li\u003e\n\u003cli\u003eBoot your Raspberry Pi 5 from an NVME M.2 Drive \u003cem\u003e(drive not included)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in heatsink for your M.2 NVME Drive\u003c\/li\u003e\n\u003cli\u003eEnjoy faster storage by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eVersatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size\u003c\/li\u003e\n\u003cli\u003eGreater thermal management for the M.2 NVME drive with the included aluminium heatsink\u003c\/li\u003e\n\u003cli\u003eReliable and consistent data transfer with included FPC impedance-controlled cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003cli\u003eArgon40 Forum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Argon NEO 5 M.2 NVME Expansion Board\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2x PCIe cables\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003cli\u003e1x Fixings set\u003c\/li\u003e\n\u003cli\u003e1x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643811070013,"sku":"jpf1789696343631","price":14.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-neo-5-m2-nvme-expansion-board_1.jpg?v=1789696348"},{"product_id":"argon-one-v3-m2-nvme-raspberry-pi-5-case","title":"Argon ONE V3 M.2 NVME Raspberry Pi 5 Case","description":"\u003cp\u003eThe Argon ONE V3 M.2 NVME case for Raspberry Pi 5 gives you all of the awesome features of an Argon ONE V3 case with the added ability to add your own M.2 NVME storage \u003cem\u003e(drive not included)\u003c\/em\u003e!\u003c\/p\u003e\n\u003cp\u003eThe lower NVME section of this case connects to your Raspberry Pi 5 via the PCI-E connector and enables the use of M.2 NVMe storage for media, games and more. Boot your Raspberry Pi 5 from fast NVME storage or use it in conjunction with a Micro-SD card OS for storage only. There's even an included aluminium heatsink for your M.2 stick!\u003c\/p\u003e\n\u003cp\u003eM.2 support aside, you get the full Argon ONE suite of \u003cspan\u003eupgraded features, a new all-black finish and the classic Argon ONE style you know and love.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eCable management and temperature are more than covered, with both passive and active (PWM 30mm blower fan) cooling keeping your Pi 5 board cool, and all ports re-routed to the back of the case - including two full-size HDMI ports and a power button. There's also a magnetic cover which allows access to colour-coded GPIO pins for your projects.\u003c\/p\u003e\n\u003cp\u003eThe case includes a built-in IR receiver which can be used with an\u003cspan\u003e \u003c\/span\u003eArgon IR remote\u003cspan\u003e \u003c\/span\u003e(available separately) to make the most of popular operating systems such as\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eRaspberry Pi OS or \u003c\/span\u003eLibreELEC\u003cspan\u003e (Kodi).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn \u003c\/span\u003e\u003cstrong\u003eoptional\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDAC accessory is also available\u003cspan\u003e, offering full high definition 24-bit 192kHz audio from your Raspberry Pi 5!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e You will need to use an official 27W Raspberry Pi power supply with this case to ensure sufficient power for the Pi, case and NVMe drive.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives. Whilst no 'official' compatibility list is maintained by Argon40 (yet), \u003cstrong\u003ewe have made them aware\u003c\/strong\u003e and discussions on their own forum are highlighting the need for clarification.\u003c\/p\u003e\n\u003cp\u003eFor now, we suggest following the same compatibility list on the Pimoroni NVME Base page as a starting point until something official is shared from Argon40. \u003cspan\u003ePlease also read our \u003c\/span\u003etroubleshooting guide\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease also note that \u003cstrong\u003edouble-sided NVME drives will not fit this product\u003c\/strong\u003e (usually found with higher-capacity drives with components on both sides of the stick).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eArgon ONE V3 M.2 NVME Case for Raspberry Pi 5 with \u003cstrong\u003eM.2 NVME support\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBoot your Raspberry Pi 5 from an NVME M.2 drive\u003c\/strong\u003e \u003cem\u003e(drive not included)\u003c\/em\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e\u003cstrong\u003eBuilt-in heatsink\u003c\/strong\u003e for your M.2 NVME drive\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnjoy faster storage access by \u003cstrong\u003econnecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eVersatile M.2 NVME support \u003cstrong\u003ecompatible with any M.2 NVME with M-Key up to 2280 size\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGreater thermal management on M.2 NVME with included \u003cstrong\u003ealuminium heatsink for the M.2 drive\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eReliable and consistent data transfer with \u003cstrong\u003eincluded FPC impedance-controlled cable\u003c\/strong\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter active cooling\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a blower-type PWM programmable 30mm fan, repositioned within the case to be quieter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImproved passive cooling\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith the addition of a heatsink on the power management chip of the Raspberry Pi 5 aside from its CPU, which both get hot during heavy use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBetter communication and power management\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith the Raspberry Pi 5 via a Raspberry Pi RP2040 chip, which controls the features and functions of the Argon ONE V3 such as fan speed, power management state (e.g. boot manually or automatically after a power outage by simply setting the jumper pins inside the case) allowing you to use the Argon ONE however you see fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower button located at the back\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ecan perform the following (with the installation of an open sourced script) safe shutdown, reboot and forced shutdown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExcellent cable management\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etwo full-sized HDMI ports\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eneatly placed at the back allows the Raspberry Pi 5 to use two monitors simultaneously\u003c\/li\u003e\n\u003cli\u003eFlush\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emagnetic cover\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto the access port of the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ecustom colour-coded GPIO pins\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in IR receiver\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eallows the Argon ONE V3 to be easily usable with the\u003cspan\u003e \u003c\/span\u003eArgon IR remote\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(not included)\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003emaking the case an even better media player\u003c\/li\u003e\n\u003cli\u003eEnjoy using your audio accessories with the optional 3.5mm audio jack via the internal DAC audio board upgrade\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(not included, coming soon)\u003c\/em\u003e\u003cspan\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nArgon Wiki\n\u003c\/li\u003e\n\u003cli\u003eArgon40 Forum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Argon ONE V3 Case\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Argon ONE M.2 NVME Carrier board\u003c\/li\u003e\n\u003cli\u003eVideo\/Audio PCB extender\u003c\/li\u003e\n\u003cli\u003eGPIO - Fan power board\u003c\/li\u003e\n\u003cli\u003eSilicon thermal pads\u003c\/li\u003e\n\u003cli\u003eInstruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643811233853,"sku":"xcr1789696368748","price":45.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-one-v3-m2-nvme-raspberry-pi-5-case_1.jpg?v=1789696373"},{"product_id":"2x-40mm-cooling-fans-for-raspberry-pi-5","title":"2x 40mm Cooling Fans for Raspberry Pi 5","description":"\u003cp\u003eThese 40mm (4010) fans are an efficient cooling solution designed to optimise the performance of your Raspberry Pi 5, and come with 4-pin connectors designed for the Pi 5's fan header socket.\u003c\/p\u003e\n\u003cp\u003eMade for optimal thermal management, this cooling fan ensures that your Raspberry Pi 5 operates at peak performance, even during resource-intensive tasks.\u003c\/p\u003e\n\u003cp\u003eTwo fans are included in the set, however only one can be used at a time. We also offer a version of this fan with heatsinks included, click here to find them.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The Raspberry Pi 5 is not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eComplete with Raspberry Pi 5 4-pin fan header\u003c\/li\u003e\n\u003cli\u003eNo GPIO pins consumed!\u003c\/li\u003e\n\u003cli\u003eSupports PWM Speed Regulation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWeight: 100g\u003c\/li\u003e\n\u003cli\u003eDimensions: L:40mm x W:10mm H:40mm\u003c\/li\u003e\n\u003cli\u003eVoltage: 5V\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x Fans\u003c\/li\u003e\n\u003cli\u003e8x Nuts\u003c\/li\u003e\n\u003cli\u003e8x Screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643811725373,"sku":"ncy1789696406540","price":8.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/2x-40mm-cooling-fans-for-raspberry-pi-5_1.jpg?v=1789696412"},{"product_id":"m2-nvme-pcie-expansion-board-for-argon-one-v3","title":"M.2 NVME PCIE Expansion Board for Argon ONE V3","description":"\u003cp\u003eIf you've already bought an\u003cspan\u003e \u003c\/span\u003eArgon ONE V3\u003cspan\u003e \u003c\/span\u003ecase for your\u003cspan\u003e \u003c\/span\u003eRaspberry Pi 5, but now you want to add some fast M.2 NVME storage to it - this expansion board is for you!\u003c\/p\u003e\n\u003cp\u003eThis expansion board effectively converts your standard Argon ONE V3 case into an Argon ONE V3 M.2 NVME case.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eOnly the lower section is included\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- you'll need to add your own Argone ONE V3 case and M.2 NVME drive (and a Raspberry Pi 5 of course!).\u003c\/p\u003e\n\u003cp\u003eThe expansion works with any M.2 NVME with M-Key up to 2280 size.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou will need to use an official 27W Raspberry Pi power supply\u003cspan\u003e \u003c\/span\u003ewith this case addition, to ensure sufficient power for the Pi, case and NVMe drive.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives. Whilst no 'official' compatibility list is maintained by Argon40 (yet),\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewe have made them aware\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003ediscussions on their own forum\u003cspan\u003e \u003c\/span\u003eare highlighting the need for clarification.\u003c\/p\u003e\n\u003cp\u003eFor now,\u003cspan\u003e \u003c\/span\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared from Argon40. \u003cspan\u003ePlease also read our \u003c\/span\u003etroubleshooting guide\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease also note that \u003cstrong\u003edouble-sided NVME drives will not fit this product\u003c\/strong\u003e (usually found with higher-capacity drives with components on both sides of the stick).\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eExpansion\/add-on for the Argon ONE V3 case\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e(main case body not included!)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eConverts an Argon ONE V3 case to an Argon ONE V3 M.2 NVME case\u003c\/li\u003e\n\u003cli\u003eTakes your Argone ONE V3 to another level with M.2 NVME drive expansion capabilities\u003c\/li\u003e\n\u003cli\u003eBoot your Raspberry Pi 5 from an NVME M.2 Drive\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e(drive not included)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in heatsink for your M.2 NVME Drive\u003c\/li\u003e\n\u003cli\u003eEnjoy faster storage by connecting M.2 NVME drives via the PCIe slot on the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eVersatile M.2 NVME support compatible with any M.2 NVME with M-Key up to 2280 size\u003c\/li\u003e\n\u003cli\u003eGreater thermal management for the M.2 NVME drive with the included aluminium heatsink\u003c\/li\u003e\n\u003cli\u003eReliable and consistent data transfer with included FPC impedance-controlled cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003cli\u003eArgon40 Forum\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x M.2 NVME PCIE Expansion Board for Argon ONE V3\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4x Soft feet\u003c\/li\u003e\n\u003cli\u003e2x PCIe cables\u003c\/li\u003e\n\u003cli\u003e1x Fixing screw set\u003c\/li\u003e\n\u003cli\u003e1x Instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643811921981,"sku":"ung1789696421758","price":17.22,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/m2-nvme-pcie-expansion-board-for-argon-one-v3_1.jpg?v=1789696426"},{"product_id":"aluminium-armour-heatsink-case-for-raspberry-pi-5","title":"Aluminium Armour Heatsink Case for Raspberry Pi 5","description":"\u003cp\u003eOur popular Aluminium Armour range is back, this time for Raspberry Pi 5!\u003c\/p\u003e\n\u003cp\u003eThis tough 2-in-1 hybrid design of both heatsink and case gives you excellent cooling and protection at the same time - and it looks great too. The two-part aluminium body makes direct contact (via thermal pads) with your Pi 5's critical components, ensuring excellent heat transfer without the need for noisy fans.\u003c\/p\u003e\n\u003cp\u003eAll ports and pins are accessible including GPIO and Micro SD access, fan\/UART\/RTC headers and even cut-outs for the PoE, CSI\/DSI and PCI-E ports.\u003c\/p\u003e\n\u003cp\u003eAssembly is easy - just fit the thermal pads (remove the backing film first), position the upper\/lower sections, then use the four screws to secure the case together.\u003c\/p\u003e\n\u003cp\u003eWe also offer a version with dual-fans!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: CSI, DSI and PCI-E ribbon cables should be fitted to the Raspberry Pi before assembling the case.\u003c\/strong\u003e \u003cem\u003eYou will need to disassemble the case to swap them out (which is just a matter of removing four screws).\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium armour case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eHybrid design - heatsink and case in one!\u003c\/li\u003e\n\u003cli\u003eSilent and efficient passive cooling\u003c\/li\u003e\n\u003cli\u003eRugged aluminium body for protecting your Pi 5\u003c\/li\u003e\n\u003cli\u003eAccess to all ports and pins\u003c\/li\u003e\n\u003cli\u003eEasy assembly - just apply the thermal pads then secure four screws.\u003c\/li\u003e\n\u003cli\u003eColour - Matt Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Aluminium Armour body (two parts)\u003c\/li\u003e\n\u003cli\u003e4x Screws\u003c\/li\u003e\n\u003cli\u003e1x Thermal pad set\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643812118589,"sku":"zep1789696443685","price":10.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-armour-heatsink-case-for-raspberry-pi-5_1.jpg?v=1789696448"},{"product_id":"kksb-raspberry-pi-5-case-with-aluminium-heatsink-for-passive-cooling","title":"KKSB Raspberry Pi 5 Case with Aluminium Heatsink for Passive Cooling","description":"\u003cp\u003eThis is a black anodised aluminium case designed for the Raspberry Pi 5. Its main feature is passive cooling, which is made possible by a large heatsink built into the aluminium frame. This design efficiently dissipates heat, keeping the device cool and maintaining its performance.\u003c\/p\u003e\n\u003cp\u003eThe case is user-friendly, featuring clearly labelled cutouts and easy access to the 40-PIN GPIO for hassle-free connections. It also includes a slot for camera and display cables and has rubber feet for stability. A QR code on the packaging provides quick access to assembly instructions.\u003c\/p\u003e\n\u003cp\u003eDesigned with a polycarbonate base, the case provides a good wireless signal transmission, which is essential for WiFi and Bluetooth connectivity. It's versatile and compatible with various mounting options like the KKSB DIN Rail Mount Clip for industrial use, the UNC Thread Bracket for tripod mounting, and the Camera Holder for projects requiring cameras.\u003c\/p\u003e\n\u003ch3\u003e\n\u003cstrong\u003eNotes\u003c\/strong\u003e:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe Raspberry Pi 5, UNC Thread Bracket, Camera Holder, Camera, and the DIN Rail Mount Clip are \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/li\u003e\n\u003cli\u003eTo use the camera with a Raspberry Pi 5, you will need to buy an adapter cable\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSilent Passive Cooling: Large black anodised aluminium heatsink for silent and effective thermal management.\u003c\/li\u003e\n\u003cli\u003eWireless-Friendly Design: Black crack-resistant polycarbonate base for optimal WiFi\/Bluetooth signal transmission with minimal signal loss.\u003c\/li\u003e\n\u003cli\u003eVersatile Mounting Options: Ideal for industrial installations and different settings. The case is compatible with the KKSB DIN Rail Mount Clip, KKSB Camera Holder, and KKSB UNC Thread Bracket for Tripod mounting (\u003cstrong\u003ethese accessories are NOT Included\u003c\/strong\u003e).\u003c\/li\u003e\n\u003cli\u003eUser-Friendly Accessibility: Laser-engraved cutouts for connectors. Dedicated slot for the camera\/display cable, and an additional slot to pass suitable cables at the back side of the case.\u003c\/li\u003e\n\u003cli\u003eReliable Build Quality: The case structure and the heatsink are made of anodised aluminium. The black surface treatment contributes to the appealing design of the case.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatibility: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCooling Method: Passive Cooling\u003c\/li\u003e\n\u003cli\u003eMaterial: Anodised Aluminum Structure – Polycarbonate Base\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x KKSB Case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eHeatsink\u003c\/li\u003e\n\u003cli\u003eThermal Pads\u003c\/li\u003e\n\u003cli\u003e4x Rubber Feet\u003c\/li\u003e\n\u003cli\u003eFasteners\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643812413501,"sku":"jxy1789696479571","price":25.13,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-raspberry-pi-5-case-with-aluminium-heatsink-for-passive-cooling_1.jpg?v=1789696485"},{"product_id":"aluminium-cooling-case-with-heat-sink-for-cm4-iot-router-carrier-board","title":"Aluminium Cooling Case with Heat Sink for CM4 IoT Router Carrier Board","description":"\u003cp\u003eThis case is designed to safely encase the Raspberry Pi CM4 IoT Router Mini inside a power distribution box, protecting against short circuits. The metal casing and heat sink work together to manage heat from the BCM2711 chip, helping to keep the board cool and running smoothly, even when it's working hard.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The Raspberry Pi Compute Module 4 IoT Router Carrier Board Mini is \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eSize: 59 x 69 x 29mm\u003c\/li\u003e \u003cli\u003eShell Material: Aluminum\u003c\/li\u003e \u003cli\u003eHeatsink Material: Aluminum\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProduct Wiki\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x Aluminum shell\u003c\/li\u003e \u003cli\u003e1x Heatsink\u003c\/li\u003e \u003cli\u003eParts package \u003cul\u003e \u003cli\u003e1x Thermal conductive sheet – Thick (for Raspberry Pi CM4)\u003c\/li\u003e \u003cli\u003e1x Thermal conductive sheet – Thin (for other CM4 compatible modules)\u003c\/li\u003e \u003cli\u003e1x Screw\u003c\/li\u003e \u003cli\u003e1x Antenna Hole Plug\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003c\/ul\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":43643812806717,"sku":"bsm1789696516270","price":17.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-cooling-case-with-heat-sink-for-cm4-iot-router-carrier-board_1.jpg?v=1789696520"},{"product_id":"aluminium-armour-blower-fan-heatsink-case-for-raspberry-pi-5","title":"Aluminium Armour Blower Fan Heatsink Case for Raspberry Pi 5","description":"\u003cp\u003eThis is a version of our\u003cspan\u003e \u003c\/span\u003eAluminium Armour case for Raspberry Pi 5\u003cspan\u003e \u003c\/span\u003ewith a\u003cstrong\u003e high-airflow\u003c\/strong\u003e \u003cstrong\u003eblower fan\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor ultimate cooling performance!\u003c\/p\u003e\n\u003cp\u003eIf you plan to run very power-hungry projects with your\u003cspan\u003e \u003c\/span\u003eRaspberry Pi 5\u003cspan\u003e \u003c\/span\u003eor keep your project in a warm environment, this might be the better option for you.\u003c\/p\u003e\n\u003cp\u003eThe two-part aluminium body makes direct contact (via thermal pads) with your Pi 5's critical components, ensuring excellent heat transfer - backed up by the blower fan. The fan makes use of the Raspberry Pi 5 JST fan socket connector, keeping all your GPIO pins free for your project and allowing software control based on the temperature of your CPU - keep the fan off when it's not needed!\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAll ports and pins are accessible including GPIO and \u003c\/span\u003eMicro SD\u003cspan\u003e access, fan\/UART\/RTC headers and even cut-outs for the PoE, CSI\/DSI and PCI-E ports.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAssembly is easy - first, secure the blower fan with the three silver screws, then fit the thermal pads (remove the backing film first), position the upper\/lower sections, and finally use the four black screws to secure the case together.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eDo not overtighten the fan screws! They only need to be finger-tight and\u003cspan\u003e \u003c\/span\u003e\u003cem\u003e'just bite'\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e- no more or you may damage the fans!\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCSI, DSI and PCI-E ribbon cables should be fitted to the Raspberry Pi before assembling the case. \u003c\/strong\u003e\u003cem\u003eYou will need to disassemble the case to swap them out (which is just a matter of removing four screws).\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAluminium Armour Blower Fan case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eHybrid design - heatsink and case in one!\u003c\/li\u003e\n\u003cli\u003eEfficient passive cooling combined with high-airflow blower fan active cooling\u003c\/li\u003e\n\u003cli\u003eSoftware-controllable fan - option to only turn them on when your CPU hits a certain temperature\u003c\/li\u003e\n\u003cli\u003eRugged aluminium body for protecting your Pi 5\u003c\/li\u003e\n\u003cli\u003eAccess to all ports and pins\u003c\/li\u003e\n\u003cli\u003eEasy assembly\u003c\/li\u003e\n\u003cli\u003eColour - Matt Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Aluminium Armour body (two parts)\u003c\/li\u003e\n\u003cli\u003e1x Blower fan\u003c\/li\u003e\n\u003cli\u003e4x Body screws (black)\u003c\/li\u003e\n\u003cli\u003e3x Fan screws (silver)\u003c\/li\u003e\n\u003cli\u003e1x Thermal pad set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643812872253,"sku":"qba1789696519779","price":12.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-armour-blower-fan-heatsink-case-for-raspberry-pi-5_1.jpg?v=1789696523"},{"product_id":"aluminium-vesa-raspberry-pi-5-case","title":"Aluminium VESA Raspberry Pi 5 Case","description":"\u003cp\u003eKeep your\u003cspan\u003e \u003c\/span\u003eRaspberry Pi 5\u003cspan\u003e \u003c\/span\u003eprotected, cool and out of sight with this aluminium Raspberry Pi 5 VESA case.\u003c\/p\u003e \u003cp\u003eThese cases feature upper and lower ventilation alongside the natural heat-dissipating qualities of the aluminium body. Combine with a heatsink or other cooling solution for even greater cooling performance!\u003c\/p\u003e \u003cp\u003e75mm VESA mounting plates are included in the pack to mount your Raspberry Pi on the back of a monitor or display, however, the case can be used without these add-on plates if preferred (\u003cstrong\u003eNote\u003c\/strong\u003e:\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eThe VESA plates are designed to be used on one side only\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ei.e. 2 screws attached to your monitor at 75mm apart, however two plates are included)\u003c\/p\u003e \u003cp\u003eAll of the side Raspberry Pi ports are accessible (HDMI\/SD\/Power\/USB), with power button access provided by the included soft button gasket. A GPIO ribbon cable pass-through cut-out has been added allowing you to access the Raspberry Pi's GPIO pins whilst the case is closed.\u003c\/p\u003e \u003cp\u003eA mini screwdriver and case fixings are included in the pack.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote: Raspberry Pi is not included\u003c\/strong\u003e. VESA mounting bolts for your monitor are not included. Simple assembly is required.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\u003cstrong\u003eCompatible with the Raspberry Pi 5 only\u003c\/strong\u003e\u003c\/li\u003e \u003cli\u003eAll-aluminium construction\u003c\/li\u003e \u003cli\u003eUpper and lower ventilation holes\u003c\/li\u003e \u003cli\u003eVESA mounting wings included for 75mm VESA mounting (two holes\/one plate only)\u003c\/li\u003e \u003cli\u003eAll Raspberry Pi ports side are accessible (no dedicated cut-outs for CSI\/DSI\/UART\/RTC\/PCI-E)\u003c\/li\u003e \u003cli\u003ePower button access via soft gasket (includes indicator light)\u003c\/li\u003e \u003cli\u003eSD card access\u003c\/li\u003e \u003cli\u003eGPIO ribbon cable pass-through section\u003c\/li\u003e \u003cli\u003eSimple assembly required (mini screwdriver included!)\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x Aluminium Case Body (2 parts)\u003c\/li\u003e \u003cli\u003e2x VESA wings\u003c\/li\u003e \u003cli\u003e1x Mini Screwdriver\u003c\/li\u003e \u003cli\u003e1x Fixing pack\u003c\/li\u003e \u003c\/ul\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643813101629,"sku":"hor1789696543140","price":9.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-vesa-raspberry-pi-5-case_1.jpg?v=1789696548"},{"product_id":"kksb-raspberry-pi-din-rail-clip-bracket","title":"KKSB Raspberry Pi DIN Rail Clip Bracket","description":"\u003cp\u003eThis bracket features six adjustable positions for flexible placement, ensuring it fits perfectly in various setups. It's compatible with Raspberry Pi models 5, 4B, and 3B, and fits a standard 35mm DIN Rail. Additionally, it accommodates other SBCs with similar screw patterns, like some ASUS Tinker Boards.\u003c\/p\u003e \u003cp\u003eIt is constructed from durable steel, and its minimalist design allows for the easy addition of extra components like heatsinks or coolers to the Raspberry Pi board.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The DIN Rail, Raspberry Pi Board, or Electronics are \u003cstrong\u003eNOT\u003c\/strong\u003e Included.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eAdaptable yet Durable Design\u003c\/li\u003e \u003cli\u003eAdaptable Fixing Positions\u003c\/li\u003e \u003cli\u003eQuick and Easy Assembly\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eMaterial: Steel\u003c\/li\u003e \u003cli\u003eSurface Treatment: Powder-Coated, Black\u003c\/li\u003e \u003cli\u003eMounting Positions: 6\u003c\/li\u003e \u003cli\u003eCompatibility: Raspberry Pi 5, 4B, 3B, and other SBCs with matching screw patterns and spacing.\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eBracket\u003c\/li\u003e \u003cli\u003eClip\u003c\/li\u003e \u003cli\u003eScrews\u003c\/li\u003e \u003c\/ul\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643813134397,"sku":"ire1789696543803","price":13.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-raspberry-pi-din-rail-clip-bracket_1.jpg?v=1789696549"},{"product_id":"ridged-armour-case-for-raspberry-pi-5","title":"Ridged Armour Case for Raspberry Pi 5","description":"\u003cp\u003eThis heavy-duty case for Raspberry Pi 5 offers excellent protection for your board whilst providing silent, efficient cooling through the all-metal body and ridged surfaces.\u003c\/p\u003e\n\u003cp\u003eHeat is transferred from your Pi 5 CPU and other critical components via direct contact with the top section of the case (via thermal pads), which has a ridged top and bottom to aid heat dissipation. It also gives the case a minimal and smart appearance which we think looks great on our desks!\u003c\/p\u003e\n\u003cp\u003eYou get access to all of the side ports - USB, HDMI, Power and Micro SD - with power button access provided by a button insert (which should be fitted when assembling the case). CSI\/DSI and PCI-E access is managed via a slot at the SD end of the case, however you'll need to fit cables before assembling the case (you can also use these slot for UART connections). A slot is also provided for a GPIO ribbon cable to pass through when the case is closed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRidged Armour case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eHybrid design - heatsink and case in one!\u003c\/li\u003e\n\u003cli\u003eSilent and efficient passive cooling\u003c\/li\u003e\n\u003cli\u003eHeavy-duty aluminium body protects your Pi 5\u003c\/li\u003e\n\u003cli\u003eAccess to all ports and pins via cut-outs and access slots\u003c\/li\u003e\n\u003cli\u003eEasy assembly - just apply the included thermal pads then secure four screws.\u003c\/li\u003e\n\u003cli\u003eColour - Matt Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAssembly Note\u003c\/h2\u003e\n\u003cp\u003eThe plastic insert for the power button should be placed with the small circle (on the inside) the same side as the Raspberry Pi 5's power switch (to the right when looking from inside the case).\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Ridged Armour Case for Pi 5\u003c\/li\u003e\n\u003cli\u003e1x Fixings and thermal pad pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643813265469,"sku":"hfr1789696556530","price":14.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/ridged-armour-case-for-raspberry-pi-5_1.jpg?v=1789696560"},{"product_id":"kksb-sbc-camera-case-with-360-degree-rotation-holder","title":"KKSB SBC Camera Case with 360 Degree Rotation Holder","description":"\u003cp\u003eThis case features a 360-degree rotatable ball swivel, which allows easy adjustment for optimal camera positioning. Made with a sturdy steel stand and a lightweight aluminium case, it’s suitable for indoor and outdoor use. This case is compatible with several camera modules, including Raspberry Pi Camera Modules 3 and 2, Coral Camera Module, and Raspberry Pi High-Quality Camera. It enables four different camera angle adjustments on the front plate, catering to photography and surveillance needs. With options for tabletop standing or mounting on walls and ceilings, it’s versatile for different projects.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The camera module, lens, camera cable, and Raspberry Pi Case are \u003cstrong\u003eNOT\u003c\/strong\u003e included.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e360-degree Rotatable Design\u003c\/li\u003e\n\u003cli\u003eDurable Construction\u003c\/li\u003e\n\u003cli\u003eDual Front Plates\u003c\/li\u003e\n\u003cli\u003eAdjustable Camera Angles\u003c\/li\u003e\n\u003cli\u003eVersatile Mounting Options\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible Camera Modules: Raspberry Pi HQ Camera, Camera Module 2, Camera Module 3, Coral 5MP Camera, and Other Small SBC Camera Modules with a similar form factor\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum Case – Steel Stand\u003c\/li\u003e\n\u003cli\u003eRotation Support: 360 Degree Rotation - Ball Swivel\u003c\/li\u003e\n\u003cli\u003eMounting Options: Thread Bracket Compatible with Standard Tripod – wall\/ceiling mounting is possible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x KKSB SBC Camera Case with 2x Front Plates\u003c\/li\u003e\n\u003cli\u003eRotatable Stand\u003c\/li\u003e\n\u003cli\u003eFasteners\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643813789757,"sku":"esp1789696599627","price":12.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-sbc-camera-case-with-360-degree-rotation-holder_1.jpg?v=1789696604"},{"product_id":"argon-blstr-dac-with-ground-loop-isolator-for-argon-one-v3","title":"Argon BLSTR DAC with Ground Loop Isolator for Argon One V3","description":"\u003cp\u003eThis add-on DAC module for the Argon ONE V3 case allows you to enjoy high-quality premium audio performance with your Raspberry Pi 5 - designed to be the perfect companion for audiophiles, hobbyists, and professionals alike.\u003c\/p\u003e\n\u003cp\u003ePowered by the Texas Instruments PCM5122 digital audio codec (DAC), the module leads out through the Argon ONE V3's 3.5mm jack port, which then feeds into the included Ground Loop Isolator to prevent the transmission of unwanted noise or hum in the audio.\u003c\/p\u003e\n\u003cp\u003eTwo cables are included - a 3.5mm jack to 3.5mm jack for between the case and Ground Loop Isolator, and a 3.5mm jack to RCA cable for connecting to your audio equipment.\u003c\/p\u003e\n\u003cp\u003eThis setup provides full high definition 24-bit 192kHz audio from your Raspberry Pi 5.\u003c\/p\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003eArgon ONE V3 case and Raspberry Pi 5 not included.\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eThis product requires an Argon ONE V3 case to function.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAudio DAC add-on module for Argon ONE V3 case (and NVME variant)\u003c\/li\u003e\n\u003cli\u003eEnjoy high quality and premium audio performance from your Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003ePowered by Texas Instruments PCM5122 digital audio codec (DAC)\u003c\/li\u003e\n\u003cli\u003eEasy installation and audio out through 3.5mm audio port with the Argon BLSTR DAC plug and play board\u003c\/li\u003e\n\u003cli\u003eEnhance audio clarity with included Ground Loop Isolator to help prevent the transmission of unwanted noise or hum in the audio\u003c\/li\u003e\n\u003cli\u003eDesigned to be the perfect companion for audiophiles, hobbyists, and professionals alike\u003c\/li\u003e\n\u003cli\u003eFull high definition 24-bit 192kHz\u003c\/li\u003e\n\u003cli\u003eAnalogue audio out (0-2V RMS) via 3.5mm hack, with 3.5mm aux to RCA out\u003c\/li\u003e\n\u003cli\u003ePowered by Argon ONE power board 8 pin and 4 pin connector for power input and output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003cli\u003ePCM5122 Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Argon BLSTR DAC board with Texas Instruments PCM5122\u003c\/li\u003e\n\u003cli\u003e1x Ground Loop Isolator\u003c\/li\u003e\n\u003cli\u003e1x 3.5mm AUX cable\u003c\/li\u003e\n\u003cli\u003e1x 3.5mm AUX to RCA out cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eArgon ONE V3 case and Raspberry Pi 5 not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Default Title","offer_id":43643815002173,"sku":"rfo1789696711910","price":22.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-blstr-dac-with-ground-loop-isolator-for-argon-one-v3_1.jpg?v=1789696716"},{"product_id":"mini-tower-kit-for-raspberry-pi-5","title":"Mini Tower Kit for Raspberry Pi 5","description":"\u003cp\u003eThis Mini Tower Kit from 52Pi is the ultimate home for your Raspberry Pi 5, \u003cstrong\u003eincluding\u003c\/strong\u003e an LED ICE tower cooler, 0.96\" OLED, strong ABS core and full port access! \u003c\/p\u003e\n\u003cp\u003eAn update of 52Pi's previous tower kit for the Pi 4, this latest Mini Tower Kit comes packed with improvements based on customer feedback.\u003c\/p\u003e\n\u003cp\u003eThe kit holds your Pi 5 within a strong ABS central frame, sandwiched between two acrylic side panels which provide full view of your Raspberry Pi along with access to the all ports including MicroSD card and GPIO pins. The front of the frame holds a 0.96\" SSD1306 OLED display \u003cem\u003e(included, pre-fitted)\u003c\/em\u003e for displaying system status information \u003cem\u003e(or other information if you code it that way)\u003c\/em\u003e and offers access to the Pi 5 USB and Ethernet ports.\u003c\/p\u003e\n\u003cp\u003eInside the enclosure is an ICE Tower cooler \u003cem\u003e(included in the package - you'll need to fit this to your Raspberry Pi)\u003c\/em\u003e keeping your Pi cool whilst also looking amazing with the multi-colour LED lights! There's also a GPIO adapter board included, giving side access to the GPIO pins for attaching ribbon cables.\u003c\/p\u003e\n\u003cp\u003eWe \u003cem\u003ereally\u003c\/em\u003e like some of the more subtle improvements 52Pi have made here, such as the new ABS materianl, quick-release OLED mount, non-slip rubber feet, cable management and embedded screw mounting points.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMini Tower Kit for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003ePrecision-molded ABS casing provides \u003c\/li\u003e\n\u003cli\u003e0.96\" OLED display for displaying system information, such as temperature, CPU usage and more\u003c\/li\u003e\n\u003cli\u003eICE Tower Cooler included - keeps your Pi cool in all scenarios\u003c\/li\u003e\n\u003cli\u003eLED Fan with colour changing lights. \u003cem\u003eNote that these LED lights may not be programmatically turned off.\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eJST fan - plugs straight into the Raspberry Pi 5 fan header interface\u003c\/li\u003e\n\u003cli\u003eAcrylic side panels offering a clear view of internal components, and port access\u003c\/li\u003e\n\u003cli\u003eGPIO side adapter included\u003c\/li\u003e\n\u003cli\u003eQuick-release OLED mount \u003cem\u003e(no more sticky tape!)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoft anti-sleep feet\u003c\/li\u003e\n\u003cli\u003eCable management\u003c\/li\u003e\n\u003cli\u003eHeat-insert screw threads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOLED Display:\n\u003cul\u003e\n\u003cli\u003e0.96\"\u003c\/li\u003e\n\u003cli\u003eSSD1306 chipset\u003c\/li\u003e\n\u003cli\u003e128x64 pixels\u003c\/li\u003e\n\u003cli\u003eI2C protocol\u003c\/li\u003e\n\u003cli\u003eDefault register address: 0x3c\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eFan: PWM adjustable speed fan, JST 4-pin\u003c\/li\u003e\n\u003cli\u003eWeight: 340g\u003c\/li\u003e\n\u003cli\u003eDimensions: 125 x 125 x 80 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nProduct Wiki\n\u003cul\u003e\n\u003cli\u003eAssembly instructions\u003c\/li\u003e\n\u003cli\u003eOLED wiring diagram\u003c\/li\u003e\n\u003cli\u003eEnabling the OLED display\u003c\/li\u003e\n\u003cli\u003eChanging the display information\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Mini Tower ABS Core\u003c\/li\u003e\n\u003cli\u003e2x Arcylic side panels\u003c\/li\u003e\n\u003cli\u003e1x ICE Tower cooler for Pi 5, with LED fan\u003c\/li\u003e\n\u003cli\u003e1x 0.96\" OLED \u003cem\u003e(pre-fitted)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Edge GPIO expansion board\u003c\/li\u003e\n\u003cli\u003e2x Thermal pads\u003c\/li\u003e\n\u003cli\u003e1x Screwdriver\u003c\/li\u003e\n\u003cli\u003e1x Fixings pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and ribbon cable not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643817656381,"sku":"bej1789697015378","price":36.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/mini-tower-kit-for-raspberry-pi-5_1.jpg?v=1789697021"},{"product_id":"kksb-case-for-raspberry-pi-5-and-raspberry-pi-dac-and-dac-pro-sound-cards","title":"KKSB Case for Raspberry Pi 5 and Raspberry Pi DAC+ and DAC Pro Sound Cards","description":"\u003cp\u003eThe KKSB Case for the Raspberry Pi 5 is designed to fit both the Raspberry Pi DAC+ and DAC Pro Sound Cards (previously known as 'IQAudio' DAC+\/DAC Pro). It has a removable cover for easy installation of the official Raspberry Pi cooler and sound card and includes an external start button for power access without opening the case. The case also has a side slot for a GPIO cable, providing easy connectivity with other devices. It includes stackable headers, 18mm and 20mm spacers to allow airflow, and has ventilation slots on the sides for improved cooling.\u003c\/p\u003e\n\u003cp\u003eThe base of the case is ready to mount with the KKSB DIN Rail Mount Clip (\u003cstrong\u003enot included\u003c\/strong\u003e) onto a 35mm Top HAT Rail. The case is also equipped with rubber feet for stability and keyholes for optional wall mounting, offering flexibility in how and where it’s set up. It's made from black anodised aluminium and has a powder-coated steel frame, protecting your Raspberry Pi. Assembly is simplified with a QR code on the packaging that links to instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you have an IQAudio DAC+ or DAC Pro, these fit as well\u003c\/strong\u003e (Raspberry Pi changed the branding but the function and format are the same.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi 5, Sound Cards, KKSB DIN Rail Mount Clip, Addons, GPIO Cable and electronics are \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible SBC: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCompatible Sound Cards: Raspberry Pi DAC+ and DAC Pro (or IQAudio versions)\u003c\/li\u003e\n\u003cli\u003eSupported KKSB Accessories: Compatible with KKSB DIN Rail Mount Clip\u003c\/li\u003e\n\u003cli\u003eMaterial: Sandblasted Anodised Aluminum Case with Powder-Coated Steel Frame\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKKSB Case for Raspberry Pi 5 and Raspberry Pi DAC+ and DAC Pro\u003c\/li\u003e\n\u003cli\u003eSpacers\u003c\/li\u003e\n\u003cli\u003eStackable Header\u003c\/li\u003e\n\u003cli\u003eRubber Feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi 5, Sound Cards, KKSB DIN Rail Mount Clip, Addons, GPIO Cable and electronics are \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643826602045,"sku":"cff1789697096878","price":16.27,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-case-for-raspberry-pi-5-and-raspberry-pi-dac-and-dac-pro-sound-cards_1.jpg?v=1789697108"},{"product_id":"kksb-raspberry-pi-5-case-for-hats-nvme-hats-and-coolers","title":"KKSB Raspberry Pi 5 Case for HATs, NVMe HATs and Coolers","description":"\u003cp\u003eThis case supports a wide range of HATs and add-ons, including \u003cstrong\u003eNVMe HATs\u003c\/strong\u003e. The removable cover makes it easy to install coolers and HATs, and the side walls are made for easy modification to fit various HAT connectors.\u003c\/p\u003e\n\u003cp\u003eA tall 40-pin stackable header is included, providing proper airflow between the cooler and the HAT. An external start button allows easy power access and included spacers accommodate different GPIO header lengths. The case also provides access to a 40 GPIO cable, making connections a lot easier.\u003c\/p\u003e\n\u003cp\u003eMade from black anodised aluminium and powder-coated steel, the case provides strong protection for your Raspberry Pi. Threaded holes for the KKSB Camera holder and keyholes for wall mounting offer versatile installation options. The case supports the official Raspberry Pi cooler and includes ventilation slots for increased cooling.\u003c\/p\u003e\n\u003cp\u003eWith ample space for add-ons, heatsinks, and low-profile coolers, this case offers a great addition your Raspberry Pi 5 setup. The side walls can be easily modified to fit HAT connectors, making it a versatile choice for various projects.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible SBC: Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSupported Accessories: Space for Raspberry Pi 5 Addon Boards, HATs, Official Raspberry Pi 5 Cooler (or other low-profile cooler with suitable dimensions), NVMe HATs, and KKSB Camera Holder (The accessories are NOT included)\u003c\/li\u003e\n\u003cli\u003eMaterial: Sandblasted Anodized Aluminum Case with Powder-Coated Steel Frame\u003c\/li\u003e\n\u003cli\u003eCompatible with the KKSB DIN Rail Clip\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKKSB Case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eStackable Header\u003c\/li\u003e\n\u003cli\u003eSpacers\u003c\/li\u003e\n\u003cli\u003eRubber Feet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643830698045,"sku":"eaq1789697314703","price":13.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-raspberry-pi-5-case-for-hats-nvme-hats-and-coolers_1.jpg?v=1789697320"},{"product_id":"hitaltech-raspberry-pi-5-din-rail-case-4m-xts","title":"Hitaltech Raspberry Pi 5 DIN Rail Case (4M XTS)","description":"\u003cp\u003eThis\u003cspan\u003e \u003c\/span\u003eItaltronic\/Hitaltech\u003cspan\u003e 4M XTS\u003cstrong\u003e \u003c\/strong\u003e\u003c\/span\u003eDIN rail mountable enclosure has been designed specifically for Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eThis is the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e4M XTS for Raspberry Pi 5\u003c\/strong\u003e, a DIN rail mountable enclosure with a transparent removable top for easy top access. The enclosure offers access to all ports (including the power button) and comes complete with DIN rail hook for ultra-fast mounting.\u003c\/p\u003e\n\u003cp\u003eTwo included screws secure your Pi 5 to the base of the case, and the rest of the enclosure simply clicks into place.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and DIN rail not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDIN Rail Mountable Case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eItaltronic 4M XTS range\u003c\/li\u003e\n\u003cli\u003eWall Mountable\u003c\/li\u003e\n\u003cli\u003ePower button access\u003c\/li\u003e\n\u003cli\u003eAccess to all side ports\u003c\/li\u003e\n\u003cli\u003eSecure Clip-in base\u003c\/li\u003e\n\u003cli\u003eTransparent access panel\u003c\/li\u003e\n\u003cli\u003eIncludes DIN Rail Hook\u003c\/li\u003e\n\u003cli\u003e2x Screws included for securing the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eManufacturer part number: 25.0410000.RP5\u003c\/li\u003e\n\u003cli\u003eEAN: 0043972434596\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nDatasheet (dimension drawing)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Main enclosure body (base + top section)\u003c\/li\u003e\n\u003cli\u003e1x Transparent lid\/cover\u003c\/li\u003e\n\u003cli\u003e1x DIN rail hook\u003c\/li\u003e\n\u003cli\u003e2x Fixing screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and DIN rail not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Hitaltech","offers":[{"title":"Default Title","offer_id":43643831779389,"sku":"alt1789697413201","price":11.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/hitaltech-raspberry-pi-5-din-rail-case-4m-xts_1.jpg?v=1789697417"},{"product_id":"argon-poly-5-for-raspberry-pi-5","title":"Argon Poly+ 5 for Raspberry Pi 5","description":"\u003cp\u003eThe Argon Poly+ 5 is Argon's affordable, compact case option for Raspberry Pi 5, for those looking for a simple Pi 5 enclosure with great looks and useful features.\u003c\/p\u003e\n\u003cp\u003eThe snap-together Poly+ 5 case is made from tough high-grade ABS and features a slide on\/off top cover for access to your board, a built-in Micro-SD card cover and space for a HAT\u003cstrong\u003e**\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA 30mm PWM fan with Pi 5 fan header connector is included\u003c\/strong\u003e, which will only turn on (and then gradually increase speed) if the CPU temperature exceeds set temperature levels. Alternatively, you can remove this fan and choose to fit an Argon THRML 30mm Active Cooler (not included).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eA set of heatsinks is also included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe case is available in all black, or black with a red slide cover. please select an option before adding to cart.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eFan and heatsinks included\u003c\/li\u003e\n\u003cli\u003eHigh-grade ABS Plastic\u003c\/li\u003e\n\u003cli\u003eSnap-on assembly - no tools required\u003c\/li\u003e\n\u003cli\u003eSlide on\/Slide off Top cover\u003c\/li\u003e\n\u003cli\u003eBuilt-in SD card cover\u003c\/li\u003e\n\u003cli\u003eFits 'standard' HATs\u003cstrong\u003e**\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e**\u003c\/strong\u003e A HAT without large features protruding from the board, if the fan is removed.\u003c\/p\u003e\n\u003ch2\u003eFan Specifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eFan speed control: Pulse width modulation (PWM) control with tachometer\u003c\/li\u003e\n\u003cli\u003eProduct material: ABS plastic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArgon Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Argon Poly+ 5 case\u003cem\u003e (select colour before adding to cart)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x 30mm PWM fan with Pi 5 header\u003c\/li\u003e\n\u003cli\u003e1x Heatsink set\u003c\/li\u003e\n\u003cli\u003e1x Printed guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Argon40","offers":[{"title":"Black","offer_id":43643838562365,"sku":"tux1789697733324","price":6.07,"currency_code":"USD","in_stock":true},{"title":"Black\/Red","offer_id":43643838595133,"sku":"uvt1789697733325","price":5.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/argon-poly-5-for-raspberry-pi-5_1.jpg?v=1789697737"},{"product_id":"kksb-digiamp-case-for-raspberry-pi-5","title":"KKSB DigiAMP+ Case for Raspberry Pi 5","description":"\u003cp\u003eThis all-metal KKSB case for Raspberry Pi 5 has been designed specifically for use with the Raspberry Pi DigiAMP+, allowing perfect access to the power and terminal block connectors for the ultimate finish for your Raspberry Pi 5 audio project.\u003c\/p\u003e\n\u003ch3\u003eEasy Access and Installation\u003c\/h3\u003e\n\u003cp\u003eThe cover of the case is removable. You can set it aside to easily set up the cooler and install the sound card without struggling with limited space or closed corners.\u003c\/p\u003e\n\u003cp\u003eThe case includes an external start button, providing convenient access to power your Raspberry Pi without the need to open the case, ensuring ease of use and accessibility. Access for a 40 GPIO cable (not included) on the side allows for easy connectivity with other devices and peripherals, simplifying setup and integration into various projects.\u003c\/p\u003e\n\u003ch3\u003eCompatibility with Official Raspberry Pi Cooler\u003c\/h3\u003e\n\u003cp\u003eDesigned to work seamlessly with the official Raspberry Pi Active Cooler \u003cstrong\u003e(not included)\u003c\/strong\u003e, this case ensures efficient cooling for optimal performance and reliability. This Raspberry Pi 5 also supports a low-profile cooler with suitable dimensions to fit inside the case. Stackable header, 18mm and 20mm spacers are included in the box. These spacers help to free up space between the cooler and the sound card mounted on top. The extra space allows proper airflow to complement heat dissipation.\u003c\/p\u003e\n\u003cp\u003eWith plenty of ventilation slots on both side panels, heat dissipation is improved, allowing for optimal performance of your Raspberry Pi 5 even during intensive tasks or in warm environments.\u003c\/p\u003e\n\u003ch3\u003eCompatible with the KKSB DIN Rail Mount Clip\u003c\/h3\u003e\n\u003cp\u003eThe base of the case is compatible with the KKSB DIN Rail Mount Clip \u003cstrong\u003e(not included)\u003c\/strong\u003e. This feature lets you mount the case onto a 35mm Top HAT Rail.\u003c\/p\u003e\n\u003cp\u003eThis case is designed in a way that you can use it in most settings without requiring hectic modifications. The case comes with rubber feet for a better non-slip grip on most surfaces. You can use the two keyholes for wall mounting to save space.\u003c\/p\u003e\n\u003ch3\u003eDurable Build Quality\u003c\/h3\u003e\n\u003cp\u003eConstructed from sandblasted black anodized aluminium and a frame made of powder-coated steel, this case offers durability and stability, ensuring long-lasting protection for your Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eAssembly instructions are conveniently available via scanning the QR code on the product packaging (or see the link below in the Resources section).\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly Instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eKKSB DigiAMP+ Case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eSpacer set\u003c\/li\u003e\n\u003cli\u003eStackable Header\u003c\/li\u003e\n\u003cli\u003eRubber Feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, DigiAMP+ HAT and DIN Rail Clip not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643844689981,"sku":"vvf1789697879253","price":14.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-digiamp-case-for-raspberry-pi-5_1.jpg?v=1789697882"},{"product_id":"kksb-tripod-bracket-14-20-unc-thread","title":"KKSB Tripod Bracket (14-20 UNC Thread)","description":"\u003cp\u003eThis KKSB 14-20 UNC Thread Tripod Bracket lets you mount \u003cstrong\u003ecompatible \u003c\/strong\u003eKKSB Cases on a tripod. This can be used on any KKSB case that has four mounting holes on the underside\/rear (the same holes that allow you to use the KKSB DIN Rail Clip).\u003c\/p\u003e\n\u003cp\u003eFor example, the KKSB Raspberry Pi 5 Case with Aluminium Heatsink for Passive Cooling has mounting holes on the rear, as shown below:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/kksb_mount_holes_1.jpg?v=1721396744\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Case and tripod not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x KKSB UNC Thread Bracket\u003c\/li\u003e\n\u003cli\u003e4x Screws\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"KKSB","offers":[{"title":"Default Title","offer_id":43643846656061,"sku":"eyr1789697920928","price":4.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kksb-tripod-bracket-14-20-unc-thread_1.jpg?v=1789697926"},{"product_id":"aluminium-raspberry-pi-5-case","title":"Aluminium Raspberry Pi 5 Case","description":"\u003cp\u003eSometimes all you want is a simple, robust case for your Raspberry Pi 5 without all the bells n' whistles - we think this one fits that description perfectly.\u003c\/p\u003e\n\u003cp\u003eMade from aluminium, including two solid side blocks for strength and coated in a black finish, this case is a sturdy home for your Pi 5. Strength and simplicity aside, we really like the understated, minimal looks of this case too.\u003c\/p\u003e\n\u003cp\u003eOnce assembled, the case offers access to the power button \u003cem\u003e(you'll need to poke a pen or cocktail stick in!)\u003c\/em\u003e and Micro SD slot, as well as providing pass-through sections for a GPIO ribbon cable, PCIe cable, CSI\/DSI cables and an RTC or UART cable.\u003c\/p\u003e\n\u003cp\u003eThe top panel is fully vented without sacrificing strength or protection and includes a couple of holes for adding a 40mm fan (fixings not included). The case can accommodate an Active Cooler as well.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eImportant Assembly Note!\u003c\/h2\u003e\n\u003cp\u003eThe Raspberry Pi is secured internally to the case using a\u003cstrong\u003e single screw\u003c\/strong\u003e in the top-right position. There are two internal posts, but only a single screw is required (as the case shell secured the Raspberry Pi in place anyway).\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eTough aluminium construction\u003c\/li\u003e\n\u003cli\u003eAccess to all ports\u003c\/li\u003e\n\u003cli\u003ePass-through sections for cables\u003c\/li\u003e\n\u003cli\u003eCan accommodate most compact Active Coolers\u003c\/li\u003e\n\u003cli\u003eTwo mounting holes for a 40mm fan (fan and fixings not included)\u003c\/li\u003e\n\u003cli\u003eSimple, understated looks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSome simple assembly is required\u003c\/strong\u003e - just a small cross-head screwdriver required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Aluminium Case for Raspberry Pi 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643847442493,"sku":"icu1789697940321","price":10.24,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/aluminium-raspberry-pi-5-case_1.jpg?v=1789697944"},{"product_id":"hifiberry-universal-steel-case-for-raspberry-pi-5","title":"HiFiBerry Universal Steel Case for Raspberry Pi 5","description":"\u003cp\u003e\u003cspan\u003eThis is HiFiBerry's universal case for use with \u003c\/span\u003eRaspberry Pi 5\u003cspan\u003e and the range of \u003c\/span\u003eHiFiBerry\u003cspan\u003e DACs*, Digis and Amp2\/3\/4 (including the \u003c\/span\u003eDSP add-on\u003cspan\u003e!).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe HiFiBerry Universal case for Pi 5case is made entirely from black-coated steel which helps with thermals, and uses a clever backplate system which allows you to swap out the plate depending on the HiFiBerry HAT you're using.\u003c\/p\u003e\n\u003cp\u003eThe case features a power button section, Micro SD access, GPIO slot and mounting holes. A GPIO riser header is included for assembly, along with a set of rubber feet to keep it steady on your desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly required. Raspberry Pi 5 and HiFiberry HATs not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*to use this case with the\u003cspan\u003e \u003c\/span\u003eDAC+DSP, you will need to purchase the\u003cspan\u003e \u003c\/span\u003eDAC+ DSP Backplate.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*to use this case with the\u003cspan\u003e \u003c\/span\u003eDAC8X, you will need to purchase the\u003cspan\u003e \u003c\/span\u003eDAC8X Backplate.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHiFiBerry universal case for Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCompatible with HiFiBerry DACs, Digis and Amp2\/3\/4\n\u003cul\u003e\n\u003cli\u003eIncluding the DSP add-on\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with HiFiBerry DAC+ DSP without optional backplate (sold separately)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eNot compatible with HiFiBerry DAC8X without optional backplate (sold separately)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot compatible with HiFiBerry XLR boards\u003c\/strong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eBlack-painted steel construction\u003c\/li\u003e\n\u003cli\u003ePower button section\u003c\/li\u003e\n\u003cli\u003eFull port access including MicroSD card and GPIO slot\u003c\/li\u003e\n\u003cli\u003eMounting section\u003c\/li\u003e\n\u003cli\u003eVentilation features, alongside natural thermal properties of steel\u003c\/li\u003e\n\u003cli\u003eFixings, GPIO riser and rubber feet included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Steel Case for HiFiBerry DAC\/Digi\/AMP and Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e3x Backplates\u003c\/li\u003e\n\u003cli\u003e1x GPIO riser\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003cli\u003e1x Fixings pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and HAT not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"HiFiBerry","offers":[{"title":"Default Title","offer_id":43643850719293,"sku":"qek1789698021662","price":28.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/hifiberry-universal-steel-case-for-raspberry-pi-5_1.jpg?v=1789698025"},{"product_id":"layer-case-for-pineboards-hats","title":"Layer Case for Pineboards HATs","description":"\u003cp\u003eWe recently listed the entire Pineboards HAT range for Raspberry Pi 5, however we quickly realised that none of our existing Raspberry Pi 5 cases worked with the bottom-mounted boards.\u003c\/p\u003e\n\u003cp\u003eWe created this layer case to solve that problem, following the positive feedback we received from our M.2 HAT+ Layer Case.\u003c\/p\u003e\n\u003cp\u003eWe used the same glass-look Perspex sandwich approach, with a wide range of fixings included (along with spares!) to make it compatible with most Pineboards add-on boards (and the Pimoroni NVMe Base\/Duo too!).\u003c\/p\u003e\n\u003cp\u003eOnce assembled, the simple design with glass-look finish is subtle yet \u003cem\u003ekinda posh-looking\u003c\/em\u003e, and offers an element of protection both under and on top of your board setup. We even include a set of rubber feet to keep it steady on your desk.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSome simple assembly required. Raspberry Pi and add-on boards not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSupported HATs\u003c\/h2\u003e\n\u003cp\u003eThe case currently accommodates the following boards by assembling the case with the different included standoffs - please see the assembly guide for instructions. Other boards may fit, but there are all of the HATs we've assembled and tested.\u003c\/p\u003e\n\u003cp\u003eSee the product images for examples of the different configurations.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePineboards\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAI Bundle (Hailo 8L)\u003c\/li\u003e\n\u003cli\u003eHatDrive! Bottom\u003c\/li\u003e\n\u003cli\u003eHatDrive! Dual\u003c\/li\u003e\n\u003cli\u003eHatDrive! AI\u003c\/li\u003e\n\u003cli\u003eHatDrive! Net 1G\u003c\/li\u003e\n\u003cli\u003eHatDrive! Piano\u003c\/li\u003e\n\u003cli\u003eHat AI!\u003c\/li\u003e\n\u003cli\u003eHat mPCIe\u003c\/li\u003e\n\u003cli\u003e\nHatBRICK! Commander (a little pointless but...you can!)\u003c\/li\u003e\n\u003cli\u003eHatNET! 2.5G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePimoroni\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNVMe Base\u003c\/li\u003e\n\u003cli\u003eNVMe Base Duo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can also remove your HAT and use the case as a simple enclosure for your Raspberry Pi!\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAssembly Guide\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Layer Case for Pineboards HATs, which includes:\n\u003cul\u003e\n\u003cli\u003e2x Glass-look Perspex layers\u003c\/li\u003e\n\u003cli\u003e10x 6mm black nylon screws\u003c\/li\u003e\n\u003cli\u003e5x 5mm black nylon screws\u003c\/li\u003e\n\u003cli\u003e5x 18mm F\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 18mm M\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 8mm F\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 8mm M\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 5mm M\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 12mm F\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 12mm M\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 20mm F\/F standoffs\u003c\/li\u003e\n\u003cli\u003e5x 20mm M\/F standoffs\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and add-on boards not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"The Pi Hut","offers":[{"title":"Default Title","offer_id":43643852423229,"sku":"pod1789698059863","price":6.79,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/layer-case-for-pineboards-hats_1.jpg?v=1789698063"},{"product_id":"highpi-pro-5s-case-for-raspberry-pi-5","title":"HighPi Pro 5S Case for Raspberry Pi 5","description":"\u003cp\u003eThe HighPi Pro 5S Case for Raspberry Pi 5 continues the HighPi case line, offering ease of use, flexible configuration, and attractive design.\u003c\/p\u003e\n\u003cp\u003eThe case provides lots of space for HATs and is compatible with the Raspberry Pi Active Cooler (when fitted). It provides as access to the Raspberry Pi 5 power button power button, along with all other ports on your Pi 5 board.\u003c\/p\u003e\n\u003cp\u003eThis ABS case is one of the easiest in the market to assemble and disassemble, no tools are required and yet all components are held securely. The package includes four rubber feet for stability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, Active Cooler and Camera Module not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eCompatible with Raspberry Pi 5 only\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eOptimised case vents for active coolers\u003c\/li\u003e\n\u003cli\u003ePower button and external status LED visibility\u003c\/li\u003e\n\u003cli\u003eCamera cable slot above ethernet to connect to external cameras\n\u003c\/li\u003e\n\u003cli\u003eSecure microSD card cover that is removable from inside the case, and is stored underneath the lid when not in use\n\u003cul\u003e\n\u003cli style=\"font-weight: bold;\"\u003e\u003cstrong\u003eNote - the SD cover is attached to the inside of the lid!\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndustry-leading ease of use, rapid tool-free assembly and disassembly\u003c\/li\u003e\n\u003cli\u003eLarge internal volume for HATs, break-out boards, or heatsinks\n\u003c\/li\u003e\n\u003cli\u003eVESA or wall-mounting via optional VESA mount kit (coming soon)\u003c\/li\u003e\n\u003cli\u003eGPIO ribbon cable port\u003c\/li\u003e\n\u003cli\u003eSelf-adhesive rubber feet, set of 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMade with ABS Plastic\u003c\/li\u003e\n\u003cli\u003eExternal dimensions: 101 x 67 x 42mm\u003c\/li\u003e\n\u003cli\u003eInternal volume for breakout boards: 85 x 56 x 30.5mm\u003c\/li\u003e\n\u003cli\u003eDimensional Drawing\u003c\/li\u003e\n\u003cli\u003eLustran 433 Material Sheet\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLustran 433 Certification Sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat fits inside?\u003c\/h2\u003e\n\u003cp\u003eWe were very impressed with the Active Cooler that launched with the Pi 5, so it was made central in our design. Along with the Raspberry Pi 5 and Active Cooler, the case can additionally hold:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePoE HATs\u003c\/li\u003e\n\u003cli\u003eNVMe HATs\u003c\/li\u003e\n\u003cli\u003eUPS HATs\u003c\/li\u003e\n\u003cli\u003eAny HAT not requiring input\/output ports, up to 14.5mm tall (on top of Active Cooler with 16mm standoffs)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf not using the Active Cooler, then the case can accommodate oversized heatsinks or cooling solutions, or any HAT up to 30.5mm above the Pi PCB that does not require input\/output ports.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/highpi-pr-5s-case-space.jpg?v=1728640099\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAssembly Instructions\u003c\/h2\u003e\n\u003cp\u003eThis case is one of the easiest in the market to assemble and disassemble, no tools are required and yet all components are held securely. To assemble the Pi board and case, follow these simple steps:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the Active Cooler, Real Time Clock, and any other desired add-on boards\/HATs on the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eSlide the Raspberry Pi board into the front of the case, so that the USB-C and micro-HDMI ports go into their positions\u003c\/li\u003e\n\u003cli\u003ePress down on the back of the Raspberry Pi board to snap it into the case\u003c\/li\u003e\n\u003cli\u003eInsert the right edge of the lid into the case, then snap down the left side\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou're done! \u003cstrong\u003eTo remove the lid and Raspberry Pi\u003c\/strong\u003e, simply:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the lid by pushing gently on the bump under the hexagon vents, and then pushing upward\u003c\/li\u003e\n\u003cli\u003eRemove the Raspberry Pi board by pulling the snap that secures the board outward without your finger\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HighPi Pro 5S Case\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi, Active Cooler and Camera Module not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"HighPi","offers":[{"title":"Default Title","offer_id":43643866513469,"sku":"oul1789698327258","price":7.94,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/highpi-pro-5s-case-for-raspberry-pi-5_1.jpg?v=1789698332"}],"url":"https:\/\/laser-engraved-clasp.shop\/collections\/raspberry-pi-cases.oembed?page=2","provider":"My Store","version":"1.0","type":"link"}