{"title":"Raspberry Pi HATs, pHATS \u0026 GPIO","description":"\u003cp\u003eBrowse our Raspberry Pi HATs, pHATS \u0026amp; GPIO collection. Best Price.\u003c\/p\u003e","products":[{"product_id":"dual-gigabit-ethernet-5g4g-base-board-for-raspberry-pi-cm4","title":"Dual Gigabit Ethernet 5G\/4G Base Board for Raspberry Pi CM4","description":"\u003cp\u003eThis is a dual Gigabit ethernet 5G\/4G base board from Waveshare, designed for the Raspberry Pi Compute Module 4 (not included).\u003c\/p\u003e\n\u003cp\u003eThis base board's main features are the dual-Gigabit Ethernet ports, allowing you to evaluate the CM4 as a controller for a custom router project. \u003cstrong\u003eYou'll need to compile your own software for this with very limited information from the manufacturer, so this is not intended for novice users!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThere's also a slot for an M.2 B-Key 4G\/5G module (not included) allowing the addition of LTE functionality for your project. Alongside this is a nano sim card slot option 5G\/4G\/3G\/2G connectivity as well.\u003c\/p\u003e\n\u003cp\u003eThe board also features 2x USB 3.2 ports, an RTC and backup battery holder, fan header, 2x CSI ports for camera modules, 1x DSI port for DSI displays, 2 full-size HDMI ports and a Micro-SD card slot!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBase board only. Does not include the CM4, power supply or M.2 B-Key module.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eThis allows you to choose your wireless and power options separately.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-20885-Dual-Gigabit-Ethernet-5G-4G-Base-Board-for-cm4-2_1.jpg?v=1645453030\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eImportant Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDO NOT hot-plug any devices except the USB and HDMI\u003c\/li\u003e\n\u003cli\u003ePlease check the fan voltage before connecting the cooling fan. The BASE board supports a 12V cooling fan by default, if you want to use a 5V cooling fan, please change the FAN_VCC resistor\u003c\/li\u003e\n\u003cli\u003eDO NOT connect other devices while writing CM4 via Type-C interface\u003c\/li\u003e\n\u003cli\u003e5V\/2.5A or higher power supply is recommended\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Onboard?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-20885-Dual-Gigabit-Ethernet-5G-4G-Base-Board-for-cm4-1_1.jpg?v=1645453030\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e - suitable for all variants of Compute Module 4\u003cbr\u003e\u003cstrong\u003e2) 40-Pin GPIO header\u003c\/strong\u003e\u003cbr\u003e - For connecting sorts of HATs\u003cbr\u003e\u003cstrong\u003e3) Dual RJ45 Gigabit Ethernet\u003c\/strong\u003e\u003cbr\u003e - 10\/100\/1000M compatible\u003cbr\u003e - ETHERNET 0: CM4 original ETH\u003cbr\u003e - ETHERNET 1: USB extended ETH\u003cbr\u003e\u003cstrong\u003e4) HDMI connectors\u003c\/strong\u003e\u003cbr\u003e - 2x HDMI, supports 4K 30fps output\u003cbr\u003e\u003cstrong\u003e5) USB 3.2 ports\u003c\/strong\u003e\u003cbr\u003e - 2x USB 3.2 Gen1, for connecting sorts of USB devices\u003cbr\u003e\u003cstrong\u003e6) PWR \u0026amp; USB\u003c\/strong\u003e\u003cbr\u003e - DC power supply or USB programming port\u003cbr\u003e\u003cstrong\u003e7) Fan header\u003c\/strong\u003e\u003cbr\u003e - For connecting cooling fan, allows speed adjustment and measurement\u003cbr\u003e\u003cstrong\u003e8) Camera Port\u003c\/strong\u003e\u003cbr\u003e - 2x MIPI CSI camera ports\u003cbr\u003e\u003cstrong\u003e9) 4G\/5G module status indicator\u003c\/strong\u003e\u003cbr\u003e - STA red: module enable indicator\u003cbr\u003e - NET green: module operating status indicator\u003cbr\u003e\u003cstrong\u003e10) CM4 status indicator\u003c\/strong\u003e\u003cbr\u003e - PWR red: Raspberry Pi power indicator\u003cbr\u003e - ACT green: Raspberry Pi operating status indicator\u003cbr\u003e\u003cstrong\u003e11) BOOT selection\u003c\/strong\u003e\u003cbr\u003e - ON: CM4 will be booted from USB-C interface\u003cbr\u003e - OFF: CM4 will be booted from eMMC or Micro SD card\u003cbr\u003e\u003cstrong\u003e12) Display Port\u003c\/strong\u003e\u003cbr\u003e - MIPI DSI display port\u003cbr\u003e\u003cstrong\u003e13) M.2 B KEY\u003c\/strong\u003e\u003cbr\u003e - Supports 4G\/5G modules, or other communication modules using USB channel\u003cbr\u003e\u003cstrong\u003e14) Nano-SIM card slot\u003c\/strong\u003e\u003cbr\u003e - Supports standard Nano-SIM card for 5G\/4G\/3G\/2G communication\u003cbr\u003e\u003cstrong\u003e15) Micro SD card slot\u003c\/strong\u003e\u003cbr\u003e - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY)\u003cbr\u003e\u003cstrong\u003e16) RTC battery holder\u003c\/strong\u003e\u003cbr\u003e - Supports CR2032 button cell\u003cbr\u003e\u003cstrong\u003e17) RTC interruption configuration\u003c\/strong\u003e\u003cbr\u003e - PI-RUN: CM4 will reboot on RTC interruption\u003cbr\u003e - GL-EN: CM4 powerdown on RTC interruption\u003cbr\u003e - D4: D4 pin is triggered on RTC interruption (default)\u003cbr\u003e\u003cstrong\u003e18) IO-VREF selection\u003c\/strong\u003e\u003cbr\u003e - Set the CM4 IO logic level as 3.3V (default) or 1.8V\u003cbr\u003e\u003cstrong\u003e19) Fan power supply selection\u003c\/strong\u003e\u003cbr\u003e - Select 12V (default) or 5V power to drive the fan\u003cbr\u003e\u003cstrong\u003e20) RTC\/FAN I2C bus selection\u003c\/strong\u003e\u003cbr\u003e - SDA0\/SCL0: I2C-10 is shared with CSI\/DSI (default)\u003cbr\u003e - GPIO3\/2: I2C-1 is shared with 40-pin header\u003cbr\u003e\u003cstrong\u003e21) System function configuration\u003c\/strong\u003e\u003cbr\u003e - BT_DIS: Bluetooth disabled, for CM4 with antenna variant ONLY\u003cbr\u003e - WiFi_DIS: WiFi disabled, for CM4 with antenna variant ONLY\u003cbr\u003e - WP_DIS: boot mode switch, ONLY be used when NOT booted from eMMC or SD card\u003cbr\u003e\u003cstrong\u003e22) RTL8153\u003c\/strong\u003e\u003cbr\u003e - USB Gigabit Ethernet chip\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"863\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"209\"\u003e\u003cstrong\u003eCM4 Socket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"654\"\u003eSuitable for all variants of Compute Module 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eNetworking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"654\"\u003eDual Gigabit Ethernet RJ45\u003cbr\u003eM.2 B KEY, for connecting 5G \/ 4G module\u003cbr\u003eNano-SIM card slot, supports  Nano-SIM card for 5G\/4G\/3G\/2G\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 3.2 Gen1 × 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePin Header\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRaspberry Pi 40-pin GPIO header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI DSI port (15pin 1.0mm FPC connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI CSI-2 port × 2 (15pin 1.0mm FPC connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHDMI × 2, supports 4K 30fps output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eRTC\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eReal-time clock with a battery socket and ability to wake CM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStoragre\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicroSD card socket for Compute Module 4 Lite (without eMMC) variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eFan Header\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5V\/12V (12V by default), allows speed adjustment and measurement\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5V\/2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e99.6 × 87.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Dual Gigabit Ethernet 5G\/4G Base Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCM4, power supply and M.2 B-key communication module not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643624554557,"sku":"qgj1789691359616","price":52.66,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/dual-gigabit-ethernet-5g4g-base-board-for-raspberry-pi-cm4_1.jpg?v=1789691363"},{"product_id":"carpihat-car-interface-hat-for-raspberry-pi","title":"CarPiHAT - Car Interface HAT for Raspberry Pi","description":"\u003cp\u003eThe TJD CarPiHAT is designed \u003cspan\u003eto make interfacing your Raspberry Pi to your car, boat, truck, or any other 12V-based system much easier.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWhilst shopping for a simple power supply and shutdown solution for his OpenAuto Pro installation, the designer (Sam Taylor-Jones) was unable to find a solution that offered all of the features he was after in a single HAT. Unhappy with the concept of stacking multiple hats to achieve the result he was after, Sam decided to design his own, and thus, the CarPiHAT was born!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe HAT includes a 12V to 5V buck converter to power your Raspberry Pi and touchscreen, safe shutdown circuitry, a low (\u0026lt; 1mA) current draw when switched off, dedicated reverse\/illumination\/aux 12V inputs, 2x general-purpose opto-isolated 12V inputs (5 in total), \u003c\/span\u003e2x high current high side switched 12V outputs (@1A) ideal for switching relays\/lights, an independent CAN bus port, RTC, I2C bus, 1W for temperature sensors etc and 5V out for displays and other components.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe HAT conforms to the official Raspberry Pi specification and is compatible with any Raspberry Pi with the 40 pin GPIO header, although it is primarily designed for use with non-zero variants.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe HAT comes with a 6-way Molex NanoFit pigtail, standoffs and screws\u003c\/strong\u003e. It's \u003cstrong\u003eavailable with or without a shroud+cooling fan\u003c\/strong\u003e (\u003cem\u003eplease select option before adding to basket\u003c\/em\u003e). We also stock  Molex NanoFit 4-way pigtails compatible with the board's connectors, for making easy terminations to existing wiring (useful for connections such as I2C, CAN etc).\u003c\/p\u003e\n\u003cp\u003eNeed more IO? Check out the CarPiHAT IO Expander!\u003c\/p\u003e\n\u003cp\u003eWe also stock a PRO 5 version of the CarPiHAT which has a high-quality DAC onboard, re-worked with higher quality inductors and a new power switching IC, with improved power conversion and filtering that provides up to 5A that Raspberry Pi 5 (sometimes) requires.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e12V -\u0026gt; 5V buck converter to power the Pi and touchscreen, with fuse and filtering.\u003c\/li\u003e\n\u003cli\u003eSafe shutdown circuitry to allow the pi to control its own power.\u003c\/li\u003e\n\u003cli\u003e\u0026lt; 1mA current draw when switched off.\u003c\/li\u003e\n\u003cli\u003eDedicated reverse, illumination and aux 12V inputs.\u003c\/li\u003e\n\u003cli\u003e2 general purpose 12V inputs. (for a total of 5 12V inputs)\u003c\/li\u003e\n\u003cli\u003e2 high current, high side switched 12V outputs (@1A). (great for switching relays, lights ect)\u003c\/li\u003e\n\u003cli\u003e1 independent CAN bus port.\u003c\/li\u003e\n\u003cli\u003eReal-time clock to maintain system time across reboots.\u003c\/li\u003e\n\u003cli\u003eBroken out I2C bus\u003c\/li\u003e\n\u003cli\u003eBroken out 1W for temperature sensors etc\u003c\/li\u003e\n\u003cli\u003e5V Power Output for displays and other 5V devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptional\u003c\/strong\u003e: protective shroud\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll 12V inputs are opto-isolated to ensure the Raspberry Pi is well protected against the typically noisy automotive power environment.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eA note on Touch Display 2 compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eThe Raspberry Pi Touch Display 2 has a new block connector rather than the previously used jumper wires. This makes wiring a little awkward!\u003c\/p\u003e\n\u003cp\u003eTo power the display, you can either snip the connector and solder directly to the CarPiHAT's 5V\/GND pads (or solder a pin header to those pads and create a jumper solution), or use this handy USB Power Breakout from Eplop.\u003c\/p\u003e\n\u003ch2\u003eWho might use a CarPiHAT?\u003c\/h2\u003e\n\u003cp\u003eAt a basic level, anyone who is looking to install a Raspberry Pi in their car, or another 12V system.\u003c\/p\u003e\n\u003cp\u003eSince the HAT allows the Raspberry Pi to take control of its own power supply, this means corrupted SD cards (due to unexpected power loss) are a thing of the past! A simple script, or service, running on the Pi allows you to monitor a 12V feed, and gracefully shut down when this is removed.\u003c\/p\u003e\n\u003cp\u003eAt a more advanced level, the additional peripherals on the HAT would allow you to connect any number of inputs or outputs to the system. The 12V outputs allow you to control lights, amplifiers, relays, solenoids, you name it! The CAN port allows the connection of an IDrive controller for a great human interface experience, or even interrogate your car's ECU with some custom software. The I2C and 1W ports allow you to connect any number of external devices such as light, temperature or environmental sensors, or even external microcontrollers!\u003c\/p\u003e\n\u003cp\u003eThere's a project log and inspiration page here including a link to the designer's very own project build.\u003c\/p\u003e\n\u003ch2\u003eHow to use the CarPiHAT?\u003c\/h2\u003e\n\u003cp\u003eThe designer has set up a GitHub page with full information (see sidebar), including a Quick Start Guide to get you started.\u003c\/p\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Datasheet_latest.png?v=1647017344\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CarPiHAT Board\u003c\/li\u003e\n\u003cli\u003e1x 6-way Molex NanoFit Pigtail\u003c\/li\u003e\n\u003cli\u003e4x Metal Standoffs\u003c\/li\u003e\n\u003cli\u003e4x Metal Screws\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOPTIONAL\u003c\/strong\u003e (\u003cem\u003eselect before adding to cart\u003c\/em\u003e): Protective Shroud + Cooling Fan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TJD","offers":[{"title":"HAT Only","offer_id":43643632123965,"sku":"yox1789691490535","price":61.0,"currency_code":"USD","in_stock":true},{"title":"HAT + Shroud","offer_id":43643632156733,"sku":"agx1789691490536","price":75.16,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/carpihat---car-interface-hat-for-raspberry-pi_1.jpg?v=1789691495"},{"product_id":"breakout-garden-i2c-connector-pack-of-5","title":"Breakout Garden I2C Connector (pack of 5)","description":"\u003cp\u003eWant to solder some Breakout Garden slots to your own circuit boards or stripboards? Now you can!\u003c\/p\u003e\n\u003cp\u003eThese are the raw card edge connectors that we use on our Breakout Garden boards. Just solder them onto your board of choice, wire them up to power, I2C and ground, then pop an I2C breakout into the socket.\u003c\/p\u003e\n\u003cp\u003eThese slots are ideal for adding Breakout Garden slots to your Trilobot or soldering directly to PCBs. If you'd rather attach a Breakout Garden socket to a breadboard or jumper wires, you might prefer I2C Breakout Extenders.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nDatasheet\u003cspan\u003e \u003c\/span\u003e(with measurements)\u003c\/li\u003e\n\u003cli\u003eEagle PCB landings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eCheck out our full range of Breakout Garden's and Breakout's \u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003ehere\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43643640807485,"sku":"oxm1789691629849","price":4.92,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/breakout-garden-i2c-connector-pack-of-5_1.jpg?v=1789691634"},{"product_id":"air-quality-datalogging-board-for-pico","title":"Air Quality Datalogging Board for Pico","description":"\u003cp\u003eMonitor and analyse the air you breathe with the Kitronik Air Quality Board for the Raspberry Pi Pico (not included). Great for home and in the classroom.\u003c\/p\u003e \u003cp\u003eThe Kitronik Smart Air Quality Board for Pico provides a complete air monitoring and reporting solution for the Raspberry Pi Pico. The wealth of onboard sensors and connection points allows you to log, store and display data effectively with the Pico filesystem and an OLED screen. There are also connection points for external devices, such as analogue sensors, servos, motors, and heater pads.\u003c\/p\u003e \u003cp\u003eThe board includes a dual row of pin sockets to connect your Raspberry Pi Pico. The Pico can then read inputs from a BME688 air quality and environmental sensor (temperature, pressure, humidity, air quality index and eCO2). The sensor, along with the RTC and flash memory on the Pico means the board is well set up for data logging. There is a black and white 128x64 OLED display screen and 3 status ZIP LEDs for visually displaying data, a piezo buzzer for audio and two buttons for user input. There are also external connections: 2 1A outputs, a servo output, an extension connection for more ZIP LEDs and analogue input connections linking to the Pico ADC (various other Pico pins are broken out to 0.1” pitch solder pads as further inputs and outputs, along with pads for 3V and GND).\u003c\/p\u003e \u003cp\u003ePower is provided via the 3xAA battery holder or the ‘POWER’ terminal block. The voltage supply is controlled using a power switch, with a green LED to indicate when the board is turned on. The Pico also produces a regulated 3V supply which is used to power the BME688 sensor and OLED display screen.\u003c\/p\u003e \u003cp\u003eThe ‘POWER’ terminal block can also be used as the connection point for a solar cell. NOTE: Please ensure the correct rechargeable batteries are fitted before charging, they should be NiMh.\u003c\/p\u003e \u003cp\u003eKitronik has a MicroPython module to support the use of the Smart Air Quality Board. This can be found, along with example programs and a full README document, on the Kitronik GitHub.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eNote: \u003c\/span\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003cspan\u003e. You'll need a Pico with male headers soldered to it. You can \u003c\/span\u003egrab a Pico here\u003cspan\u003e and \u003c\/span\u003ePico male headers here\u003cspan\u003e, or buy a Pico with pre-soldered headers.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/5336_description-kitronik-air-quality-monitoring-board-raspberry-pi-pico_1.jpg?v=1648729759\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eAn all-in-one Air Quality monitoring and reporting solution for the Raspberry Pi Pico \u003cem\u003e(Pico not included)\u003c\/em\u003e\n\u003c\/li\u003e \u003cli\u003eMeasure temperature, pressure, humidity, air quality index, and eCO2\u003c\/li\u003e \u003cli\u003eThe board features a black and white 128x64 OLED display screen for visually displaying data\u003c\/li\u003e \u003cli\u003eThe sensor, along with the RTC and flash memory on the Pico means the board is well set up for time-stamped data logging\u003c\/li\u003e \u003cli\u003eThe board also has 3 status ZIP LEDs for visually displaying data, a piezo buzzer for audio and two buttons for user input\u003c\/li\u003e \u003cli\u003eThere is an integrated two-row connector for the Raspberry Pi Pico to slot into\u003c\/li\u003e \u003cli\u003eThere are connection points for external devices, such as analogue sensors, servos, motors, and heater pads\u003c\/li\u003e \u003cli\u003eThe board also features a connection point for a solar cell that can be used alongside rechargeable batteries to keep your experiments running for longer\u003c\/li\u003e \u003cli\u003eRun long term monitoring experiments in the classroom throughout the school year\u003c\/li\u003e \u003cli\u003eLength: 74mm\u003c\/li\u003e \u003cli\u003eWidth: 72mm\u003c\/li\u003e \u003cli\u003eHeight (Max): 28.7mm\u003c\/li\u003e \u003cli\u003ePCB Thickness: 1.6mm\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/kitronik-air-quality-datalogging-board_1.jpg?v=1648729899\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Kitronik Smart Air Quality Board for Raspberry Pi Pico\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eRequires\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e\nRaspberry Pi Pico (with headers soldered on)\u003c\/li\u003e \u003cli\u003e\n3 x AA Batteries or Rechargeable Batteries \u0026amp; solar cell\n\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003cli\u003eMicroPython Module on GitHub\u003c\/li\u003e \u003cli\u003eUsing the BME688 Sensor\u003c\/li\u003e \u003cli\u003eUsing OLED and RTC\u003c\/li\u003e \u003cli\u003eThe Buzzer, Buttons \u0026amp; ZIP LEDs\u003c\/li\u003e \u003cli\u003eData Logging\u003c\/li\u003e \u003cli\u003eAnalogue Input \u0026amp; Output Control\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eVideo\u003c\/h2\u003e \u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/VXrcBSgs8k0\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":43643650867261,"sku":"ygd1789691722229","price":40.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/air-quality-datalogging-board-for-pico_1.jpg?v=1789691750"},{"product_id":"nano-base-board-a-for-raspberry-pi-cm4","title":"Nano Base Board (A) for Raspberry Pi CM4","description":"\u003cp\u003eThe Nano Base Board A from Waveshare is a simple, affordable way to evaluate the Raspberry Pi Compute Module 4, breaking out key functionality whilst maintaining a compact and low-profile footprint - the same size as the CM4 itself!\u003c\/p\u003e\n\u003cp\u003eThis board allows you to power your CM4 via USB-C whilst also providing a USB port, CSI camera connector, SD card slot, GPIO breakout, boot switch and indication LEDs. \u003c\/p\u003e\n\u003cp\u003eWe also stock the Nano Base Board (B) which offers more functionality (but costs a little more).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: the GPIO header is packed with the board separately and \u003cspan style=\"text-decoration: underline;\"\u003ewill require soldering!\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe Base Board A is the same overall size as the CM4 module yet offers a host of useful features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e40-pin GPIO breakout\u003c\/li\u003e\n\u003cli\u003eMale colour-coded GPIO pins \u003cstrong\u003e(packaged separately - requires soldering)\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB-C 5V power port\u003c\/li\u003e\n\u003cli\u003eCSI port for Raspberry Pi Camera Modules\n\u003c\/li\u003e\n\u003cli\u003eMicroSD card socket for CM4 Lite variants\u003c\/li\u003e\n\u003cli\u003e1x USB 2.0 port\u003c\/li\u003e\n\u003cli\u003eBoot switch\u003c\/li\u003e\n\u003cli\u003ePower indication LED\u003c\/li\u003e\n\u003cli\u003eActivity Indication LED\u003c\/li\u003e\n\u003cli\u003eDimensions: 55mm x 40mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Onboard?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CM4-NANO-A-details-intro_1.jpg?v=1650914163\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e - Suitable for all variants of Compute Module 4\u003cbr\u003e\u003cstrong\u003e2) Power supply \/ Programming\u003c\/strong\u003e\u003cbr\u003e - 5V power supply, or used for eMMC burning\u003cbr\u003e\u003cstrong\u003e3) Micro SD card slot\u003c\/strong\u003e\u003cbr\u003e - For connecting a Micro SD card with pre-burnt image (Lite variant ONLY)\u003cbr\u003e\u003cstrong\u003e4) CSI interface\u003c\/strong\u003e\u003cbr\u003e - 1 × MIPI CSI camera interface\u003cbr\u003e\u003cstrong\u003e5) USB2.0 interface\u003c\/strong\u003e\u003cbr\u003e - For connecting sorts of USB devices\u003cbr\u003e\u003cstrong\u003e6) 40-pin GPIO interface\u003c\/strong\u003e\u003cbr\u003e - Suitable for connecting to various HAT modules\u003cbr\u003e\u003cstrong\u003e7) PWR indicator\u003c\/strong\u003e\u003cbr\u003e - CM4 power status\u003cbr\u003e\u003cstrong\u003e8) ACT indicator\u003c\/strong\u003e\u003cbr\u003e - CM4 working status\u003cbr\u003e\u003cstrong\u003e9) AMS1117-3.3\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e10) BOOT switch\u003c\/strong\u003e\u003cbr\u003e - \u003cstrong\u003eON\u003c\/strong\u003e: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)\u003cbr\u003e - \u003cstrong\u003eOFF\u003c\/strong\u003e: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or Micro SD card)\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Nano Base Board (A) for CM4\u003c\/li\u003e\n\u003cli\u003e1x 40-pin colour-coded GPIO header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompute Module 4 not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643675082813,"sku":"drh1789692029178","price":14.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/nano-base-board-a-for-raspberry-pi-cm4_1.jpg?v=1789692033"},{"product_id":"sx1262-433mhz-lora-node-module-for-raspberry-pi-pico","title":"SX1262 433MHz LoRa Node Module for Raspberry Pi Pico","description":"\u003cp\u003eThe SX1262 433M is a LoRa node expansion module designed for the Raspberry Pi Pico supporting the LoRaWAN protocol and \u003cstrong\u003eEU433 band\u003c\/strong\u003e. The module comes complete with a lithium battery, antenna and connectors to get your project started - just add a Raspberry Pi Pico!\u003c\/p\u003e\n\u003cp\u003eThe module can connect to TTN and TTS servers through a LoRa gateway to use the LoRa Cloud service fast and easily with your Pico. Just slot your pico into the pre-soldered female headers to connect the two together, then use the online resources to get started.\u003c\/p\u003e\n\u003cp\u003eOn the board, you'll find an IPEX 1 antenna connector, which can be used with the included IPEX1 to SMA wire and 2DB 433MHz stub antenna (also included). There's also a power switch, battery connector, LED status indicators and solderable RF switch control.\u003c\/p\u003e\n\u003cp\u003eThe package includes the module, a 600mAh 3.7V LiPo battery, 2DB 433MHz stub antenna and an IPEX to SMA cable. We also stock an 868MHz version.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNote: \u003c\/span\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003cspan\u003e. You'll need a Pico with male headers soldered to it. You can \u003c\/span\u003egrab a Pico here\u003cspan\u003e and \u003c\/span\u003ePico male headers here\u003cspan\u003e, or buy a Pico with pre-soldered headers.\u003c\/span\u003e\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003eLithium Battery Shipping:\u003c\/strong\u003e\u003c\/span\u003e Due to courier restrictions, this product can only be shipped within the United Kingdom. With this item in your cart, your shipping options will be limited and may cost more than our usual rates. Why?\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003eSupports LoRaWAN protocol and EU433 band\u003c\/li\u003e\n\u003cli\u003ePH1.25 battery and recharge controller (connect rechargeable Lithium battery)\u003c\/li\u003e\n\u003cli\u003ePower switch\u003c\/li\u003e\n\u003cli\u003e2x LED indicators for monitoring module operating status\u003c\/li\u003e\n\u003cli\u003eBattery, Antenna and antenna cable included\u003c\/li\u003e\n\u003cli\u003eOnline development resources and manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Onboard?\u003c\/h2\u003e\n\u003cp\u003e\u003cem\u003eImages show the 868MHz version however board features are the same\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"Pico SX262 LoRa module onboard features\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sx1262-lora-module-for-raspberry-pi-pico-868mhz-5_1.jpg?v=1641827002\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1) Raspberry Pi Pico header\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e2) Status indicators\u003c\/strong\u003e\u003cbr\u003e- PWR: power indicator\u003cbr\u003e- CHG: recharge indicator\u003cbr\u003e\u003cstrong\u003e3) RF switch control\u003c\/strong\u003e\u003cbr\u003e- A: controlled by high level (default)\u003cbr\u003e- B: controlled by GPIO22\u003cbr\u003e\u003cstrong\u003e4) MCP73831 recharge IC\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e5) SX1262 module\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e6) IPEX 1 antenna connector\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e7) Power switch\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e8) PH1.25 battery header\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"473\" style=\"height: 180px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eRFID\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003eSX1262\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eFrequency range\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003eEU433 (410~525MHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eModulation\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003eLoRa\/(G)FSK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eEmit power\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003e\u0026gt;14dBm@3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eOperating voltage\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003e3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd rowspan=\"2\" style=\"height: 36px; width: 216.406px;\"\u003eModule power consumption\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003eemitting current: 107mA@22dBm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003ereceiving current: 5.3mA@125KHz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eCommunication bus\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003eSPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eOperating temperature\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003e-40 ~ 85℃\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 216.406px;\"\u003eDimensions\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 246.594px;\"\u003e21.00 × 52.00mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Pico LoRa SX1262 433M Module\u003c\/li\u003e\n\u003cli\u003e1x 3.7V 600mAh LiPo battery\u003c\/li\u003e\n\u003cli\u003e1x 2DB 433mhz Antenna\u003c\/li\u003e\n\u003cli\u003e1x IPEX1 to SMA wire\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eGitHub\u003c\/li\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe demo code is based on the\u003cspan\u003e \u003c\/span\u003epico-lorawan\u003cspan\u003e \u003c\/span\u003eproject, and updated to be compatible with this module. For more details about the LoRaWAN protocol, pleaser refer to\u003cspan\u003e \u003c\/span\u003eLoRa Allicance.\u003c\/p\u003e\n\u003cp\u003eIf you want to create your own cloud server, pleaser refer to\u003cspan\u003e \u003c\/span\u003elorawan-stack,chrpstack\u003c\/p\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"Pico SX1262 Lora Module Pinout\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/sx1262-lora-module-for-raspberry-pi-pico-868mhz-6_1.jpg?v=1641827030\u0026amp;width=700\"\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643680948285,"sku":"ynq1789692115224","price":11.65,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/sx1262-433mhz-lora-node-module-for-raspberry-pi-pico_1.jpg?v=1789692119"},{"product_id":"arduino-compatible-base-board-for-raspberry-pi-compute-module-4","title":"Arduino-Compatible Base Board for Raspberry Pi Compute Module 4","description":"\u003cp\u003eThis base board for the Raspberry Pi Compute Module 4 gives your CM4 an Arduino Uno footprint with the same pin header layout and PCB size as the famous Arduino board.\u003c\/p\u003e\n\u003cp\u003eThe board supports a 5V DC power supply via the Type-C interface. There's a full-size HDMI interface, one CSI interface and one USB 2.0 interface. You'll also find an SD slot as well as a programmable LED (GPIO6), two user-programmable buttons (one of which can also be used as a reset button), a BOOT switch and solder jumpers for various settings.\u003c\/p\u003e\n\u003cp\u003eYou can also add an NVME SSD to this board using the M.2 interface on the underside of the PCB!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompute Module not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eUsage Tips\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eWhen powered on, do not plug and unplug any device except USB and HDMI\u003c\/li\u003e\n\u003cli\u003eThe Type-C interface can be used as a power supply or as a USB interface to burn images (use the BOOT switch)\u003c\/li\u003e\n\u003cli\u003eIn order to ensure the normal power supply to the CM4, please do not connect other devices when using the Type-C interface to burn the image\u003c\/li\u003e\n\u003cli\u003eThe minimum power supply should be 5V 2A (ideally use a 5V 3A power supply for headroom)\u003cbr\u003eUSB2.0 is closed by default, if you want to open it, you need to add \u003cem\u003edtoverlay=dwc2,dr_mode=host\u003c\/em\u003e in config.txt\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's onboard\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CM4-Duino-details-intro_1.jpg?v=1652182396\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1)\u003c\/strong\u003e \u003cstrong\u003ePower supply\/burning interface\u003c\/strong\u003e - 5V\/2A power supply, can also be used as an eMMC burning interface\u003cbr\u003e\u003cstrong\u003e2)\u003c\/strong\u003e \u003cstrong\u003eUSB 2.0 interface\u003c\/strong\u003e - supports various USB devices to be inserted\u003cbr\u003e\u003cstrong\u003e3)\u003c\/strong\u003e \u003cstrong\u003eHDMI port\u003c\/strong\u003e - Supports 4K 30fps output\u003cbr\u003e\u003cstrong\u003e4) BOOT switch button\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e- ON: Compute Module 4 boots to USB Type-C port\u003cbr\u003e- OFF: Compute Module 4 boots to eMMC or Micro SD card\u003cbr\u003e\u003cstrong\u003e5)\u003c\/strong\u003e \u003cstrong\u003eCM4 Connector\u003c\/strong\u003e - For all versions of Compute Module 4\u003cbr\u003e\u003cstrong\u003e6)\u003c\/strong\u003e \u003cstrong\u003eCamera Interface\u003c\/strong\u003e - MIPI CSI Camera Module Interface\u003cbr\u003e\u003cstrong\u003e7)\u003c\/strong\u003e \u003cstrong\u003eUser LED\u003c\/strong\u003e - Programmable\u003cbr\u003e\u003cstrong\u003e8)\u003c\/strong\u003e \u003cstrong\u003eADC chip\u003c\/strong\u003e - 8-bit ADC, I2C interface, 8-channel ADC chip ADS7830\u003cbr\u003e\u003cstrong\u003e9)\u003c\/strong\u003e \u003cstrong\u003eUser Button\u003c\/strong\u003e - Programmable\u003cbr\u003e\u003cstrong\u003e10) GPIO Arduino interface\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003e11)\u003c\/strong\u003e \u003cstrong\u003eFunction Solder Switches\u003c\/strong\u003e - Please refer to the wiki\u003cbr\u003e\u003cstrong\u003e12)\u003c\/strong\u003e \u003cstrong\u003eM.2 interface\u003c\/strong\u003e - Supports NVME SSD solid-state or other PCI-E channels\u003cbr\u003e\u003cstrong\u003e13)\u003c\/strong\u003e \u003cstrong\u003eMicro SD card interface\u003c\/strong\u003e - For adding a Micro SD card to start the CM4 Lite\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"642\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"180\"\u003e\u003cstrong\u003eCM4 Socket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"462\"\u003eSuitable for all variants of Compute Module 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eM.2 M KEY slot, for  communication module or NVME SSD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eArduino compatible GPIO header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUSB 2.0 Type A × 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMIPI CSI-2 × 1 (15pin 1.0mm FPC connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eHDMI × 1, supports 4K 30fps output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eMicro SD card socket for Compute Module 4 Lite (without eMMC)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e73.58 × 53.34mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CM4-Duino base Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompute Module not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CM4-Duino4_1.jpg?v=1652182460\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643682029629,"sku":"mme1789692123929","price":26.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/arduino-compatible-base-board-for-raspberry-pi-compute-module-4_1.jpg?v=1789692128"},{"product_id":"pin-breakout-for-the-raspberry-pi-pico","title":"Pin Breakout for the Raspberry Pi Pico","description":"\u003cp\u003eThe Kitronik Pin Breakout for the Raspberry Pi Pico has been designed to offer an easy way of connecting additional circuitry and devices to the Pico. It also allows for moving the Pico between projects without the need to remove all of the jumper cables.\u003c\/p\u003e \u003cp\u003eThe Pico plugs into the two inner rows of sockets. The remaining two outer rows can then be used for connecting to external devices\/circuits. The board has clear markings for each pin and the correct orientation for inserting the Pico is also clearly marked.\u003c\/p\u003e \u003cp\u003eIn order to use this board, the Pico should have soldered pin headers, it can then be firmly inserted into the board. Additionally, the board features 4 x M3 mounting holes to allow for fixing the board to projects\/prototyping setups. Care was taken when designing the Pico Pin Breakout to maintain as small a footprint as possible.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eIt offers a convenient interface for controlling additional circuitry with the Raspberry Pi Pico\u003c\/li\u003e \u003cli\u003eThe board features 2 x rows of sockets that a Pico with soldered pin headers can slot straight into\u003c\/li\u003e \u003cli\u003eThe outer rows of sockets can be used to connect any of the Pico i\/o pins to a project\/prototype\u003c\/li\u003e \u003cli\u003eUse jumper wires, soldering is not required\u003c\/li\u003e \u003cli\u003eRaspberry Pi Pico prototyping made easy\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eContents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1 x Kitronik Pin Breakout for the Raspberry Pi Pico\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eDimensions\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eLength: 65mm\u003c\/li\u003e \u003cli\u003eWidth: 37mm\u003c\/li\u003e \u003cli\u003eHeight: 11.2mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eRequires\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eRaspberry Pi Pico with soldered pin headers\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDatasheet\u003c\/li\u003e \u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":43643713191997,"sku":"jdg1789692502397","price":4.03,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pin-breakout-for-the-raspberry-pi-pico_1.jpg?v=1789692533"},{"product_id":"motor-shim-for-pico","title":"Motor SHIM for Pico","description":"\u003cp\u003eThis neat little add-on board lets you drive two micro metal gearmotors from a Raspberry Pi Pico - tiny robots ahoy!\u003c\/p\u003e\n\u003cp\u003eSolder this SHIM to the back of your Pico and unlock the magical ability to\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eplug in up to two of our micro metal gearmotors\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(using these tidy\u003cspan\u003e \u003c\/span\u003eshort motor cables). To connect them up via cable, your motors will need to be equipped with\u003cspan\u003e \u003c\/span\u003eMotor Connector Shims\u003cspan\u003e \u003c\/span\u003e(but if you'd rather not solder the shims to the motors yourself, we also sell them\u003cspan\u003e \u003c\/span\u003ewith motors pre-attached).\u003c\/p\u003e\n\u003cp\u003eIn addition to the motor driver, Motor SHIM for Pico features a multi-purpose and ever-popular\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003euser button\u003c\/strong\u003e plus a\u003cspan\u003e \u003c\/span\u003eQw\/ST connector\u003cspan\u003e \u003c\/span\u003eso you can attach breakouts and give your diminutive robot some smarts. You could use it to make a tiny front-wheel drive robot (like a mini\u003cspan\u003e \u003c\/span\u003eTrilobot) or even a matchbox-sized balancing robot.\u003c\/p\u003e\n\u003cp\u003eWe've designed it to be as slimline as possible and use minimal pins so it can be combined easily with other add-ons, like our\u003cspan\u003e \u003c\/span\u003ePico Packs and Bases. For a smol battery-powered robot with LiPo charging and an on\/off button, consider using a Pimoroni Pico LiPo or stack this SHIM with a\u003cspan\u003e \u003c\/span\u003eLiPo SHIM for Pico!\u003c\/p\u003e\n\u003cp\u003eMotor SHIM for Pico is supported by a well-documented C++\/MicroPython motor library with lots of examples - there's even one to teach your motors how to sing! \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual H-Bridge motor driver (DRV8833)\u003c\/li\u003e\n\u003cli\u003e2 JST-ZH connectors (2-pin) for attaching motors\u003c\/li\u003e\n\u003cli\u003eUser button\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector for attaching breakouts\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi Pico.\u003c\/li\u003e\n\u003cli\u003eSoldering required.\u003c\/li\u003e\n\u003cli\u003eC++\/MicroPython libraries\u003c\/li\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eRaspberry Pi Pico, headers and other components shown are sold separately.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2\u003eAssembly\u003c\/h2\u003e\n\u003cp\u003eYou'll need to solder the SHIM to the back of your Pico, with the mounting holes lining up at the USB port end. The 'PICO MOTOR SHIM' text on the SHIM and the pin labels on the back of the Pico should be facing each other.\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eC++\/MicroPython\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elibraries are packed with powerful features for working with motors. You'll get best performance using C++, but if you're a beginner we'd recommend using our batteries included MicroPython build for ease of getting started.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDownload Pirate brand MicroPython\u003c\/li\u003e\n\u003cli\u003eMicroPython API documentation\u003c\/li\u003e\n\u003cli\u003eMicroPython examples\u003c\/li\u003e\n\u003cli\u003eC++ examples\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlternatively, you can use\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCircuitPython\u003c\/strong\u003e to drive motors with your Raspberry Pi Pico, if you want access to all the nice conveniences of Adafruit's ecosystem.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGetting Started with CircuitPython\u003c\/li\u003e\n\u003cli\u003eCircuitPython example\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: approx 26mm x 21mm x 5mm (L x W x H, including connectors)\u003c\/li\u003e\n\u003cli\u003eIf you're ambitious in the ways of experimental soldering, you can try soldering the Pico and the SHIM both to the short end of your header, back to back - leaving the long ends of the pins free to plug into other things. This method makes for a much more slimline Pico\/SHIM package, but you'll need to make sure your solder joints make good contact with the pads of both boards and the header.\u003c\/li\u003e\n\u003cli\u003eIf you'd prefer not to attach Motor SHIM permanently to your Pico, consider soldering it to a pair of socket headers (as pictured in the photos of Pimoroni Pico LiPo).\u003c\/li\u003e\n\u003cli\u003eThe little pink robot weighs just 68.8g! It uses Motor SHIM for Pico,\u003cspan\u003e \u003c\/span\u003eLiPo SHIM for Pico, a\u003cspan\u003e \u003c\/span\u003e1\/2\" ball caster,\u003cspan\u003e \u003c\/span\u003ewhite motor brackets , 32x7mm wheels\u003cspan\u003e \u003c\/span\u003eand a dinky\u003cspan\u003e \u003c\/span\u003e150mAh LiPo battery. The chassis baseplate is laser cut from 3mm acrylic (download the .dxf file).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout Raspberry Pi Pico\u003c\/h2\u003e\n\u003cp\u003eRaspberry Pi Pico\u003cspan\u003e \u003c\/span\u003eis a flexible, low-cost\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003emicrocontroller development board\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efrom the folks at Raspberry Pi, based on their very own chip - the RP2040. It's easily programmable over USB with C\/C++ or MicroPython, and ideal for use in all sorts of physical computing projects, devices and inventions - we're so excited to see what you make with it!\u003c\/p\u003e\n\u003cp\u003eWe've called our Pico-sized add-ons\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epacks\u003c\/strong\u003e, as they're designed to attach to the back of your Pico as if it were wearing a very stylish backpack (or a miniature jet pack, if you prefer). We've also got Pico\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebases\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(larger add-on boards with a space to mount your Pico on top) and some other boards that let you do interesting hackerly things like using multiple packs at once -\u003cspan\u003e \u003c\/span\u003eclick here\u003cspan\u003e \u003c\/span\u003eto view them all!\u003c\/p\u003e\n\u003cp\u003eYour Pico will need to have male headers soldered to it (with the pins pointing downwards) to attach to our add-on boards.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43643718336573,"sku":"xxi1789692604051","price":7.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/motor-shim-for-pico_1.jpg?v=1789692611"},{"product_id":"enviro-urban-pico-w-aboard","title":"Enviro Urban (Pico W Aboard)","description":"\u003cp\u003eA wireless outdoor air quality monitoring board with environmental and particulate sensors and a microphone, \u003cspan\u003ewith a \u003c\/span\u003e\u003cstrong\u003eRaspberry Pi Pico W built-in\u003c\/strong\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEnviro Urban is an all-in-one board for checking up on all the airborne nasties that can occur in built-up areas. There's a BME280 sensor for measuring\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003etemperature, humidity, and pressure,\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ea\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003emicrophone\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor noise monitoring and a pre-installed \u003cspan\u003ePMS5003I \u003cstrong\u003eparticulate sensor. \u003c\/strong\u003eParticulate matter is made up of tiny particles that are a mix of sizes and types, like dust, pollen, mould spores, smoke particles, organic particles and metal ions, and more. Particulates are much of what we think of as air pollution. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAccumulate data in a database (we like InfluxDB) to campaign for cleaner air in your area, or use the wireless capabilities of the Raspberry Pi Pico W to contribute to citizen science projects like sensor.community.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eEnviro x Pico W Aboard\u003c\/h2\u003e\n\u003cp\u003eOur new Enviro (Pico W Aboard) range is designed with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eenvironmental monitoring\/logging\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ein mind. We wanted to make a range of Pico\/RP2040-powered, all-in-one sensor boards that are compact, easy to install in places and straightforward to program. The wireless capability of Raspberry Pi Pico W lets Enviro integrate with other systems - so you could post your data into databases, home automation systems, or online citizen science efforts - the Internet's your lobster!\u003c\/p\u003e\n\u003cp\u003eBecause the least fun thing about adding lots of sensors to your environment is figuring out how to supply power to everything without tons of trailing wires, they are all designed to work well off \u003cstrong\u003ebattery power\u003c\/strong\u003e.  Each Enviro board has an onboard RTC (Real Time Clock) so that they can periodically wake up from deep sleep, take a reading (and, optionally, connect to wifi) and then go back to sleep - giving you months of untethered battery life.\u003c\/p\u003e\n\u003cp\u003eWe've also put together some handy accessory kits to go with our Enviro boards, that include an appropriately sized AA or AAA battery pack, a USB cable and other essentials for each board, so you can get going super quick.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eEnviro Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Pico W Aboard\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003ePowered and programmable by USB micro-B\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2.4GHz wireless\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eDeep sleep\/wake function using RTC\u003c\/li\u003e\n\u003cli\u003e1 x POKE (user) button\u003c\/li\u003e\n\u003cli\u003eReset button (because we're not monsters)\u003c\/li\u003e\n\u003cli\u003eBattery connector (JST-PH connector, 5.5V max voltage)\u003c\/li\u003e\n\u003cli\u003eUser\/activity LED (dimmable via PWM, can only be lit when the board is awake)\u003c\/li\u003e\n\u003cli\u003eWarn LED (attached to RTC)\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector for attaching breakouts\u003c\/li\u003e\n\u003cli\u003eFully assembled\u003c\/li\u003e\n\u003cli\u003eNo soldering required\u003c\/li\u003e\n\u003cli\u003eEnviro firmware\u003c\/li\u003e\n\u003cli\u003eSchematic (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEnviro Urban Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 temperature, pressure, humidity sensor (datasheet)\u003c\/li\u003e\n\u003cli\u003eMEMS microphone (datasheet)\u003c\/li\u003e\n\u003cli\u003ePMSA003I particulate matter sensor (datasheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEnviro Urban + Accessory Kit Includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEnviro Urban\u003c\/li\u003e\n\u003cli\u003eWeatherproof cover\/Stevenson screen\u003c\/li\u003e\n\u003cli\u003e3 x AA battery pack\u003c\/li\u003e\n\u003cli\u003e3 x AA batteries\u003c\/li\u003e\n\u003cli\u003eUSB micro-B cable\u003c\/li\u003e\n\u003cli\u003eVelcro for attaching the battery pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSoftware\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eEnviro ships with some super slick provisioning software that makes it really easy to set it up and connect to things, even if it's your first foray into environmental logging\/IoT. Power it up and connect to the network called 'Enviro Urban Setup' with your phone, tablet or other wi-fi enabled device - your Pico W will walk you through the rest!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGetting Started Guide\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eThe Qw\/ST connectors on Enviro boards make it super easy to connect up I2C Qwiic\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eSTEMMA QT breakouts. If your breakout has a QW\/ST connector on board, you can plug it straight in with a\u003cspan\u003e \u003c\/span\u003eJST-SH to JST-SH cable. \u003c\/p\u003e\n\u003cp\u003eBreakout Garden breakouts that don't have a Qw\/ST connector can be connected using a\u003cspan\u003e \u003c\/span\u003eJST-SH to JST-SH cable plus a Qw\/ST to Breakout Garden adaptor. Want to use multiple breakouts at the same time? Try\u003cspan\u003e \u003c\/span\u003ethis adaptor!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nList of breakouts\u003cspan\u003e \u003c\/span\u003ecurrently compatible with our C++\/MicroPython build.\u003c\/li\u003e\n\u003cli\u003eEnviro and InfluxDB\/Grafana\u003c\/li\u003e\n\u003cli\u003eGetting Started with Enviro (Pico W Aboard)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurements: 69 x 36 mm (L x W, approx)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnviro boards can enter a \u003cstrong\u003edeep sleep\u003c\/strong\u003e mode where the Pico W, onboard sensors and sensors connected via Qw\/ST are completely powered down. The only thing left running on the board is the RTC which can wake up the board again at a set date and time or on a timer. You can also wake up the board via the POKE button, or by connecting the USB cable (the board will never sleep if connected to USB power). Power consumption when asleep is 20uA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe \u003cstrong\u003eRTC\u003c\/strong\u003e can also be used to keep track of the time and date (which means we don't need to waste power by making a wireless call to find out the time\/date each time we log a sensor reading!)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe \u003cstrong\u003eWarn LED\u003c\/strong\u003e is connected to the RTC, so it can be lit even during deep sleep to notify you of problems. It is limited to three states - on, off, or 1hz blink (it's not possible to control the brightness).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eWe'd recommend using a\u003cspan\u003e \u003c\/span\u003e3 x AA battery pack with Enviro Urban as the particulate sensor uses quite a lot of power. Any battery pack that can supply between 2V and 5.5V will (work though - 2 or 3 alkaline AA or AAA cells, 4 rechargeable NiMH cells or a single cell LiPo. If you're using a LiPo, bear in mind there's no battery charging included on Enviro boards, so you'll need a separate LiPo battery charger (like a\u003cspan\u003e \u003c\/span\u003eLiPo Amigo) to be able to charge it. \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout Pico W Aboard\u003c\/h2\u003e\n\u003cp\u003eOur new Pico W Aboard products come with a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebuilt-in Raspberry Pi Pico W\u003c\/strong\u003e. This means you get all the advantages of an RP2040 microcontroller - a speedy fast dual-core ARM processor, a dynamic, growing ecosystem and a choice of different programming methods to experiment with. Most excitingly though, Pico W has \u003cstrong\u003ewireless connectivity\u003c\/strong\u003e, so your Pico\/RP2040 devices can communicate with each other, and the internet!\u003c\/p\u003e\n\u003cp\u003eWireless is very new to Pico\/RP2040 - be aware that things will move fast and change! Software support (wireless examples, tutorials, CircuitPython support etc) will take a little while to catch up. If you're an absolute beginner to Pico\/RP2040, you might have a better experience with wireless if you wait until everything is a little more settled.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Enviro Urban Only","offer_id":43643741143101,"sku":"ppe1789692925848","price":56.76,"currency_code":"USD","in_stock":true},{"title":"Enviro Urban + Accessory Kit","offer_id":43643741175869,"sku":"pty1789692925849","price":65.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/enviro-urban-pico-w-aboard_1.jpg?v=1789692931"},{"product_id":"inventor-2040-w-pico-w-aboard","title":"Inventor 2040 W (Pico W Aboard)","description":"\u003cp\u003eAn all-in-one board for making battery-powered contraptions that can move, (optionally) make noise, and talk to the internet, with a \u003cstrong\u003eRaspberry Pi Pico W built-in\u003c\/strong\u003e\u003cspan\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eInventor 2040 is a multi-talented board that does (almost) everything you might want a robot, prop or other mechanical thing to do. Drive a couple of fancy\u003cspan\u003e \u003c\/span\u003emotors with encoders\u003cspan\u003e \u003c\/span\u003eattached? Yep! Add up to six\u003cspan\u003e \u003c\/span\u003eservos? Sure? Attach a little\u003cspan\u003e \u003c\/span\u003espeaker\u003cspan\u003e \u003c\/span\u003eso you can make noise? No problem! It's also got a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebattery connector\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eso you can power your inventions from AA\/AAA or LiPo batteries and carry your miniature automaton\/animated top hat\/treasure chest that growls at your enemies around with you untethered.\u003c\/p\u003e\n\u003cp\u003eYou also get a ton of options for hooking up\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003esensors\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand other gubbins - there's two Qw\/ST connectors (and an unpopulated Breakout Garden slot) for attaching breakouts, three ADC pins for analog sensors, photoresistors and such, and three spare digital GPIO you could use for LEDs, buttons or digital sensors. Speaking of LEDs, we've also somehow managed to fit in 12\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eaddressable LEDs\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(AKA Neopixels) - one for each servo and GPIO\/ADC channel (or just use the whole lot for making rainbows, that's fine too).\u003c\/p\u003e\n\u003cp\u003eBest of all though, is the brains of the outfit - the onboard Raspberry Pi Pico W, which will give your creations 2.4GHz\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewireless connectivity.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eUse it to trigger your mechanical friends to do their thing remotely, or perhaps you can make a robotic bird that tweets, and also Tweets?\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Pico W Aboard\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM\u003c\/li\u003e\n\u003cli\u003e2MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003ePowered and programmable by USB micro-B\u003c\/li\u003e\n\u003cli\u003e2.4GHz wireless\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e2 JST-SH connectors (6-pin) for attaching motors\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDual H-Bridge motor driver (DRV8833)\u003c\/li\u003e\n\u003cli\u003ePer motor current limiting (425mA)\u003c\/li\u003e\n\u003cli\u003ePer motor direction indicator LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e2 pin (Picoblade-compatible) connector for attaching speaker\u003c\/li\u003e\n\u003cli\u003eJST-PH (2 pin) connector for attaching battery (input voltage 2.5V - 5.5V*)\u003c\/li\u003e\n\u003cli\u003e6 sets of header pins for connecting 3 pin hobby servos\u003c\/li\u003e\n\u003cli\u003e6 sets of header pins for GPIO (3 of which are ADC capable)\u003c\/li\u003e\n\u003cli\u003e12 x addressable RGB LEDs\/Neopixels\u003c\/li\u003e\n\u003cli\u003eUser button\u003c\/li\u003e\n\u003cli\u003eReset button (built in\u003cspan\u003e \u003c\/span\u003eCaptain Resetti!)\u003c\/li\u003e\n\u003cli\u003e2 x Qw\/ST connectors for attaching breakouts\u003c\/li\u003e\n\u003cli\u003eUnpopulated headers for adding a\u003cspan\u003e \u003c\/span\u003eBreakout Garden slot\n\u003c\/li\u003e\n\u003cli\u003eFully assembled\u003c\/li\u003e\n\u003cli\u003eNo soldering required (unless you want to add the Breakout Garden slot).\u003c\/li\u003e\n\u003cli\u003eC\/C++ and MicroPython libraries\u003c\/li\u003e\n\u003cli\u003eSchematic (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eMotors, servos, batteries and speakers are sold separately.\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eC\/\u003c\/strong\u003e\u003cstrong\u003eC++\/MicroPython\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elibraries provide an easy way to interface with the functions on this board. You'll get the best performance using C++, but if you're a beginner we'd recommend using our batteries included MicroPython build for ease of getting started.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDownload pirate-brand MicroPython\u003c\/li\u003e\n\u003cli\u003eMotor function reference\u003c\/li\u003e\n\u003cli\u003eServo function reference\u003c\/li\u003e\n\u003cli\u003eMicroPython examples\u003c\/li\u003e\n\u003cli\u003eC++ examples\u003c\/li\u003e\n\u003cli\u003eExamples demonstrating wireless functionality are coming soon!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease note that playing audio files (such as wavs and mp3s) is not yet supported in C\/C++\/MicroPython, but you can make very satisfying retro bleeps and bloops by PWMing the speaker (use a lower volume to avoid sounds being distorted).\u003c\/p\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003e\u003cspan data-mce-fragment=\"1\"\u003eThe Qw\/ST connectors make it super easy to connect up\u003c\/span\u003e Qwiic\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eSTEMMA QT breakouts. If your breakout has a QW\/ST connector on board, you can plug it straight in with a\u003cspan\u003e \u003c\/span\u003eJST-SH to JST-SH cable. \u003c\/p\u003e\n\u003cp\u003eBreakout Garden breakouts that don't have a Qw\/ST connector can be connected using a\u003cspan\u003e \u003c\/span\u003eJST-SH to JST-SH cable plus a Qw\/ST to Breakout Garden adaptor. Want to use multiple breakouts at the same time? Try\u003cspan\u003e \u003c\/span\u003ethis adaptor!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nList of breakouts\u003cspan\u003e \u003c\/span\u003ecurrently compatible with our C++\/MicroPython build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurements: 52mm x 66mm x 12mm (L x W x H). The mounting holes are M2.5 and 2.7mm in from each edge.\u003c\/li\u003e\n\u003cli\u003eThe direction indicators for each motor can be disabled by cutting the \"motor LED\" traces on the rear.\u003c\/li\u003e\n\u003cli\u003e* The battery voltage range is dependent on what functions you're using! Minimum voltages from our testing:\n\u003cul\u003e\n\u003cli\u003eMotor driver stops working below about 2.9V\u003c\/li\u003e\n\u003cli\u003eAudio stops working below about 2.2V\u003c\/li\u003e\n\u003cli\u003ePico stops working below about 1.9V\u003c\/li\u003e\n\u003c\/ul\u003e\nMax battery voltage is 5.5V, though we have powered from 5.6V, meaning rechargeable NiMH 4xAA packs can be used.\u003c\/li\u003e\n\u003cli\u003eYou can have a battery and USB connected at the same time safely. The board will use whichever power source has the higher voltage (usually USB).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout Pico W Aboard\u003c\/h2\u003e\n\u003cp\u003eOur new Pico W Aboard products come with a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebuilt-in Raspberry Pi Pico W\u003c\/strong\u003e. This means you get all the advantages of an RP2040 microcontroller - a speedy fast dual-core ARM processor, a dynamic, growing ecosystem and a choice of different programming methods to experiment with. Most excitingly though, Pico W has\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ewireless connectivity\u003c\/strong\u003e, so your Pico\/RP2040 devices can communicate with each other, and the internet!\u003c\/p\u003e\n\u003cp\u003eWireless is very new to Pico\/RP2040 - be aware that things will move fast and change! Software support (wireless examples, tutorials, CircuitPython support etc) will take a little while to catch up. If you're an absolute beginner to Pico\/RP2040, you might have a better experience with wireless if you wait until everything is a little more settled.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43643746222141,"sku":"tfq1789693008902","price":32.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/inventor-2040-w-pico-w-aboard_1.jpg?v=1789693013"},{"product_id":"enviro-weather-pico-w-aboard-board-only","title":"Enviro Weather (Pico W Aboard) - Board Only","description":"\u003cp\u003eA wireless climate and environmental monitoring system\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003edesigned to make hooking up weather sensors a breeze (or a squall, or a gale), with a \u003cstrong\u003eRaspberry Pi Pico W built-in\u003c\/strong\u003e!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEnviro Weather is a super slimline all-in-one board for keeping a (weather) eye on the great outdoors. \u003cspan\u003eThe onboard sensors can measure \u003c\/span\u003e\u003cstrong\u003etemperature, humidity, pressure and light\u003c\/strong\u003e\u003cspan\u003e. The sturdy RJ11 connectors (remember those?) will let you easily attach\u003c\/span\u003e\u003cstrong\u003e \u003c\/strong\u003ewind and rain sensors\u003cspan\u003e. \u003c\/span\u003e\u003cspan\u003eWe've designed this one to be installed outside in a suitable weatherproof enclosure (like a Stevenson screen) and connected to wirelessly - logging the data locally or piping it into databases, home automation dashboards or online citizen science projects.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003ePlease note \u003cstrong\u003ewind and rain sensors are\u003cspan\u003e \u003c\/span\u003esold separately\u003c\/strong\u003e. We also stock a full Enviro Weather (Pico W Aboard) Station Kit!\u003c\/p\u003e\n\u003ch2\u003eEnviro x Pico W Aboard\u003c\/h2\u003e\n\u003cp\u003eOur new Enviro (Pico W Aboard) range is designed with\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eenvironmental monitoring\/logging\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ein mind. We wanted to make a range of Pico\/RP2040-powered, all-in-one sensor boards that are compact, easy to install in places and straightforward to program. The wireless capability of Raspberry Pi Pico W lets Enviro integrate with other systems - so you could post your data into databases, home automation systems, or online citizen science efforts - the Internet's your lobster!\u003c\/p\u003e\n\u003cp\u003eBecause the least fun thing about adding lots of sensors to your environment is figuring out how to supply power to everything without tons of trailing wires, they are all designed to work well off \u003cstrong\u003ebattery power\u003c\/strong\u003e. Each Enviro board has an onboard RTC (Real Time Clock) so that they can periodically wake up from deep sleep, take a reading (and, optionally, connect to wifi) and then go back to sleep - giving you months of untethered battery life.\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eEnviro Features\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Pico W Aboard\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e2MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003ePowered and programmable by USB micro-B\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e2.4GHz wireless\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eDeep sleep\/wake function using RTC\u003c\/li\u003e\n\u003cli\u003e1 x POKE (user) button\u003c\/li\u003e\n\u003cli\u003eReset button (because we're not monsters)\u003c\/li\u003e\n\u003cli\u003eBattery connector (JST-PH connector, 5.5V max voltage)\u003c\/li\u003e\n\u003cli\u003eUser\/activity LED (dimmable via PWM, can only be lit when board is awake)\u003c\/li\u003e\n\u003cli\u003eWarn LED (attached to RTC)\u003c\/li\u003e\n\u003cli\u003e\nQw\/ST connector for attaching breakouts\u003c\/li\u003e\n\u003cli\u003eFully assembled\u003c\/li\u003e\n\u003cli\u003eNo soldering required.\u003c\/li\u003e\n\u003cli\u003eEnviro firmware\u003c\/li\u003e\n\u003cli\u003eSchematic (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eEnviro Weather Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBME280 temperature, pressure, humidity sensor (datasheet)\u003c\/li\u003e\n\u003cli\u003eLTR-559 light and proximity sensor (datasheet)\u003c\/li\u003e\n\u003cli\u003eRJ11 connectors for connecting wind and rain sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSoftware\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eEnviro ships with some super slick provisioning software that makes it really easy to set it up and connect to things, even if it's your first foray into environmental logging\/IoT. Power it up and connect to the network called 'Enviro Weather Setup' with your phone, tablet or another wi-fi-enabled device - your Pico W will walk you through the rest!\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eGetting Started Guide\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnviro and InfluxDB\/Grafana\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGetting Started with Enviro (Pico W Aboard)\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eThe Qw\/ST connectors on Enviro boards make it super easy to connect up I2C Qwiic\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003eSTEMMA QT breakouts. If your breakout has a QW\/ST connector on board, you can plug it straight in with a\u003cspan\u003e \u003c\/span\u003eJST-SH to JST-SH cable.\u003c\/p\u003e\n\u003cp\u003eBreakout Garden breakouts that don't have a Qw\/ST connector can be connected using a\u003cspan\u003e \u003c\/span\u003eJST-SH to JST-SH cable plus a Qw\/ST to Breakout Garden adaptor. Want to use multiple breakouts at the same time? Try\u003cspan\u003e \u003c\/span\u003ethis adaptor!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\nList of breakouts\u003cspan\u003e \u003c\/span\u003ecurrently compatible with our C++\/MicroPython build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurements: 69 x 36 x 14 mm (L x W x H, approx)\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eEnviro boards can enter a \u003cstrong\u003edeep sleep\u003c\/strong\u003e mode where the Pico W, onboard sensors and sensors connected via Qw\/ST are completely powered down. The only thing left running on the board is the RTC which can wake up the board again at a set date and time or on a timer. You can also wake up the board via the POKE button, or by connecting the USB cable (the board will never sleep if connected to USB power). Power consumption when asleep is 20uA.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe \u003cstrong\u003eRTC\u003c\/strong\u003e can also be used to keep track of the time and date (which means we don't need to waste power by making a wireless call to find out the time\/date each time we log a sensor reading!)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThe \u003cstrong\u003eWarn LED\u003c\/strong\u003e is connected to the RTC, so it can be lit even during deep sleep to notify you of problems. It is limited to three states - on, off, or 1hz blink (it's not possible to control the brightness).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eMost Enviro boards can be powered by a 2 x AAA battery pack, which fits neatly behind the board. Any battery pack that can supply between 2V and 5.5V will work though - 2 or 3 alkaline AA or AAA cells, 4 rechargeable NiMH cells or a single cell LiPo. If you're using a LiPo, bear in mind there's no battery charging included on Enviro boards, so you'll need a separate LiPo battery charger (like a\u003cspan\u003e \u003c\/span\u003eLiPo Amigo) to be able to charge it.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout Pico W Aboard\u003c\/h2\u003e\n\u003cp\u003eOur new Pico W Aboard products come with a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebuilt-in Raspberry Pi Pico W\u003c\/strong\u003e. This means you get all the advantages of an RP2040 microcontroller - a speedy fast dual-core ARM processor, a dynamic, growing ecosystem and a choice of different programming methods to experiment with. Most excitingly though, Pico W has \u003cstrong\u003ewireless connectivity\u003c\/strong\u003e, so your Pico\/RP2040 devices can communicate with each other, and the internet!\u003c\/p\u003e\n\u003cp\u003eWireless is very new to Pico\/RP2040 - be aware that things will move fast and change! Software support (wireless examples, tutorials, CircuitPython support etc) will take a little while to catch up. If you're an absolute beginner to Pico\/RP2040, you might have a better experience with wireless if you wait until everything is a little more settled.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43643750350909,"sku":"hbg1789693084672","price":27.49,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/enviro-weather-pico-w-aboard---board-only_1.jpg?v=1789693092"},{"product_id":"pico-enviro-pack","title":"Pico Enviro+ Pack","description":"\u003cp\u003eA fully featured environmental monitoring\/citizen science add-on for Raspberry Pi Pico and Pico W. It has a built-in colour 1.54\" LCD screen and is jam-packed with sensors!\u003c\/p\u003e\n\u003cp\u003ePico Enviro+ Pack measures just 61 x 31.5 mm, but we've filled it to the brim with\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003eenvironmental sensors\u003c\/strong\u003e. It has similar features to the larger\u003cspan\u003e \u003c\/span\u003eEnviro+ for Raspberry Pi - a weather and gas sensor, light sensor, microphone and particulate sensing*, plus a\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003egorgeous, colour LCD\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- but it's built to plug into the back of a\u003cspan\u003e \u003c\/span\u003eRaspberry Pi Pico\u003cspan\u003e \u003c\/span\u003e(or, even better - a shiny new wireless-capable\u003cspan\u003e \u003c\/span\u003ePico W).\u003c\/p\u003e\n\u003cp\u003eMeasure temperature, pressure, humidity and detect pollutant gases with the top quality BME688 weather sensor; measure light level with the LTR-559 light and proximity sensor and measure ambient noise level with the analog MEMS microphone. Connect up a PMS5003 particulate matter (PM) sensor (*available separately) and you can measure air quality too!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYour Pico will need to have pin headers soldered to it\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(with the pins pointing downwards) to attach to our add-on boards. Either grab a Pico H with headers pre-soldered or buy some headers and do the hot thing yourself (available in standard black or coloured versions).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBME688 4-in-1 temperature, pressure, humidity and gas sensor (datasheet)\u003c\/li\u003e\n\u003cli\u003eLTR-559 light and proximity sensor (datasheet)\u003c\/li\u003e\n\u003cli\u003eMEMS microphone (datasheet)\u003c\/li\u003e\n\u003cli\u003e1.54\" 240x240 IPS LCD (connected via SPI)\u003c\/li\u003e\n\u003cli\u003e4 x tactile buttons\u003c\/li\u003e\n\u003cli\u003eConnector for\u003cspan\u003e \u003c\/span\u003eparticulate matter (PM) sensor\u003cspan\u003e \u003c\/span\u003e(available separately)\u003c\/li\u003e\n\u003cli\u003ePre-soldered socket headers for attaching to Pico\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi Pico\/Pico W.\u003c\/li\u003e\n\u003cli\u003eFully assembled\u003c\/li\u003e\n\u003cli\u003eNo soldering required (as long as your Pico has header pins attached).\u003c\/li\u003e\n\u003cli\u003eC\/C++ and MicroPython libraries\u003c\/li\u003e\n\u003cli\u003eSchematic (coming soon)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA\u003cspan\u003e \u003c\/span\u003eRaspberry Pi Pico\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003ePico W\u003cspan\u003e \u003c\/span\u003eis not included so make sure to grab one!\u003c\/p\u003e\n\u003ch2\u003eCare about air!\u003c\/h2\u003e\n\u003cp\u003eThe original Enviro+ for Raspberry Pi was developed in collaboration with the University of Sheffield, with the aim of letting you contribute real-time air quality data from your local area to open data projects.\u003c\/p\u003e\n\u003cp\u003eThe alarming drop in our air quality is something that's really important to understand. Devices like Enviro+ allow fine-grained, detailed datasets that let us see shifts in air quality through time and across different areas of cities. The more devices that contribute data, the better quality the dataset becomes.\u003c\/p\u003e\n\u003cp\u003eParticulate matter (PM) is made up of tiny particles that are a mix of sizes and types, like dust, pollen, mould spores, smoke particles, organic particles and metal ions, and more. Particulates are much of what we think of as air pollution. They can be measured, in size and quantity, by particulate matter sensors like the\u003cspan\u003e \u003c\/span\u003ePMS5003\u003cspan\u003e \u003c\/span\u003ethat you can connect to Enviro+.\u003c\/p\u003e\n\u003cp\u003eTemperature, air pressure and humidity can all affect particulate levels too, so the BME688 sensor on Pico Enviro+ Pack is really important to understanding the other data that it outputs. The gas sensor function on BME688 will react to changes in volatile organic compounds (VOCs), volatile sulfur compounds (VSCs) and the presence of carbon monoxide and hydrogen to give a general measure of indoor or outdoor air quality.\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eC++\/MicroPython\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elibraries include support for the screen and all the onboard sensors on Pico Enviro+. You'll get the best performance using C++, but if you're a beginner we'd recommend using our batteries included MicroPython build for ease of getting started.\u003c\/p\u003e\n\u003cp\u003eThe PMS5003 particulate sensor (sold separately) uses a pure MicroPython driver which you will need to install using Thonny.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDownload pirate-brand MicroPython\u003c\/li\u003e\n\u003cli\u003eGetting Started with Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003ePicoGraphics function reference\u003c\/li\u003e\n\u003cli\u003eMicroPython examples\u003c\/li\u003e\n\u003cli\u003eMicroPython PMS5003 driver\u003c\/li\u003e\n\u003cli\u003eExamples that use wireless functionality are coming soon!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurements: 61.5 x 31.5 x 9.5 mm (L x W x H, approx)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43643750416445,"sku":"bcp1789693087753","price":39.42,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pico-enviro-pack_1.jpg?v=1789693094"},{"product_id":"cm4-to-cm3-adapter","title":"CM4 to CM3 Adapter","description":"\u003cp\u003eThis adapter board converts a\u003cspan\u003e \u003c\/span\u003eRaspberry Pi Compute Module 4 (CM4)\u003cspan\u003e \u003c\/span\u003eto the\u003cspan\u003e \u003c\/span\u003eRaspberry Pi Compute Module 3\u003cspan\u003e \u003c\/span\u003eSODIMM format, allowing you to maintain projects, designs and products that use the older CM3 format by utilising newer generation Compute Modules.\u003c\/p\u003e\n\u003cp\u003eThe adapter board uses a standard CM4 connector and includes an onboard CM4 ACT status indicator, buck-boost chip to support 3.3V\/V power input, power supply selection pads and IO level selection pads.\u003c\/p\u003e\n\u003ch2\u003eAdapt them all!\u003c\/h2\u003e\n\u003cp\u003eWe have a few other options in the store if you're into this\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eCM4 adapting life\u003c\/em\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCM4 to 3B adapter\u003c\/li\u003e\n\u003cli\u003eCM4 to 4B adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOnboard standard CM4 connector, support access to CM4 Lite \/ eMMc series boards\u003c\/li\u003e\n\u003cli\u003eOnboard standard CM3 SODIMM, easily connected to the original CM3 ecosystem baseboard\u003c\/li\u003e\n\u003cli\u003eOnboard buck-boost DC chip - supports 3.3V\/5V power input\u003c\/li\u003e\n\u003cli\u003eOnboard ACT LED, can monitor the working status of CM4 in real-time\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 67.6mm x 46mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CM4-to-CM3 Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompute Module not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOnboard Resource Comparison\u003c\/h3\u003e\n\u003ctable width=\"495\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"245\"\u003e\u003cstrong\u003eCM4-to-CM3-Board\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"250\"\u003e\u003cstrong\u003eCM4\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHDMI\u003c\/td\u003e\n\u003ctd\u003eHDMI0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO0~27\u003c\/td\u003e\n\u003ctd\u003eGPIO0~27\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO28, GPIO29\u003c\/td\u003e\n\u003ctd\u003eGPIO44(SDA0), GPIO45 (SCL0)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO31, GPIO33\u003c\/td\u003e\n\u003ctd\u003eCAM_GPIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGPIO30, GPIO32, GPIO33~45\u003c\/td\u003e\n\u003ctd\u003eNC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSI0\u003c\/td\u003e\n\u003ctd\u003eCSI1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCSI1\u003c\/td\u003e\n\u003ctd\u003eCSI0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSI0\u003c\/td\u003e\n\u003ctd\u003eDSI1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDSI1\u003c\/td\u003e\n\u003ctd\u003eDSI0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB2.0\u003c\/td\u003e\n\u003ctd\u003eUSB2.0\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSDIO\u003c\/td\u003e\n\u003ctd\u003eSDIO\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643757527101,"sku":"myo1789693341180","price":15.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/cm4-to-cm3-adapter_1.jpg?v=1789693347"},{"product_id":"pci-e-to-4-channel-sata-30-adapter-for-cm4-io-board","title":"PCI-E to 4-channel SATA 3.0 Adapter for CM4 IO Board","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003eCompute Module 4 IO board\u003cspan\u003e \u003c\/span\u003eincludes a 1x PCIe Gen 2.0 slot allowing you to add additional hardware to your\u003cspan\u003e \u003c\/span\u003eCM4\u003cspan\u003e \u003c\/span\u003eprojects.\u003c\/p\u003e\n\u003cp\u003eThis PCI-E to 4-channel SATA 3.0 adapter board adds a low latency, low-power AHCI controller to your CM4 IO board, allowing you to build up various high-speed IO systems, including servers, high-capacity system storage or surveillance platforms.\u003c\/p\u003e\n\u003cp\u003eIn addition to the power supply from the PCI-E interface, there's also a power header for an external 5v\/12v input. LED indicators are onboard for each SATA channel, flashing whenever data is read\/written.\u003c\/p\u003e\n\u003ch2\u003eNote\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe module is PCIe Gen 3 interface but the Raspberry Pi CM4 is PCIe Gen 2 interface, therefore \u003cstrong\u003ethe max speed is 5Gbps\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupports 5V\/12V SATA Hard Disks. Does not Support the M.2 Interface\u003c\/li\u003e\n\u003cli\u003eDoes not support direct access to a PC motherboard\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eStorage, CM4 and IO board are not included\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSupports single-channel PCI Express\u003c\/li\u003e\n\u003cli\u003eFour power-saving modes of L0s\/L1\/L23\/L3\u003c\/li\u003e\n\u003cli\u003eSupport L1 sub-state deep power saving mode\u003c\/li\u003e\n\u003cli\u003eSupports SRIS, AER, LTR\u003c\/li\u003e\n\u003cli\u003eSupports SATA LED\u003c\/li\u003e\n\u003cli\u003eSupports NCQ \u0026amp; AHCI SPEC 1.4\u003c\/li\u003e\n\u003cli\u003eFour SATA3.0 (6Gbps) ports\u003c\/li\u003e\n\u003cli\u003eSupports the switching based on the port multiplier commands\u003c\/li\u003e\n\u003cli\u003eSupports SATA Partial\/Dormancy power management\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 82mm x 39mm\u003c\/li\u003e\n\u003cli\u003e4-pin Power Port connector: PH 2.54\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PCIe-TO-SATA-4P\u003c\/li\u003e\n\u003cli\u003e1x SATA Adapter Cable\u003c\/li\u003e\n\u003cli\u003e1x Screws pack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eStorage, CM4 and IO board are not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Documentation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643757756477,"sku":"rwz1789693353572","price":18.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pci-e-to-4-channel-sata-30-adapter-for-cm4-io-board_1.jpg?v=1789693361"},{"product_id":"terminal-block-board-for-raspberry-pi-pico","title":"Terminal Block Board for Raspberry Pi Pico","description":"\u003cp\u003eThis terminal block expansion board for the Raspberry Pi Pico is just right for makers who love using terminal blocks for wiring up their projects!\u003c\/p\u003e \u003cp\u003eThe board has all pins of the Pico broken out into terminal blocks and provides users with additional GDI, 5V output, and 7-24 power input. Each port is labelled with clear silkscreens.\u003c\/p\u003e \u003cp\u003eAll terminal blocks (except GND) have LED indicators for status indicating, which can be turned off using the onboard switch when not required.\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eNote: \u003c\/span\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003cspan\u003e. You'll need a Pico with male headers soldered to it. You can \u003c\/span\u003egrab a Pico here\u003cspan\u003e and \u003c\/span\u003ePico male headers here\u003cspan\u003e, or buy the Pico H with pre-soldered headers.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Terminal_Block_Board_for_Raspberry_Pi_Pico_features_1.jpg?v=1666310349\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eTerminal blocks, make connections more stable and reliable\u003c\/li\u003e \u003cli\u003eAll pins of the main board are broken out\u003c\/li\u003e \u003cli\u003eExternal Voltage Input: 7-24V\u003c\/li\u003e \u003cli\u003eClear colour silkscreens\u003c\/li\u003e \u003cli\u003eGDI for connecting the display\u003c\/li\u003e \u003cli\u003eTerminal block status indicator\u003c\/li\u003e \u003cli\u003eTerminal block status indicator switch\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eExternal Voltage Input: 7~24V\u003c\/li\u003e \u003cli\u003eScreen Interface: GDI\u003c\/li\u003e \u003cli\u003eGPIO x27\u003c\/li\u003e \u003cli\u003eGND x5\u003c\/li\u003e \u003cli\u003e5V Port x2\u003c\/li\u003e \u003cli\u003e3.3V Port x2\u003c\/li\u003e \u003cli\u003ePort LED Indicator x35\u003c\/li\u003e \u003cli\u003ePort LED Indicator Color: blue\u003c\/li\u003e \u003cli\u003eDefault ON Port Indicator: 3.3V, 5V, VSYS, VBUS, VREF\u003c\/li\u003e \u003cli\u003eDimension (Without Package): 61mm x 93.5mm\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eProduct wiki\u003c\/li\u003e \u003cli\u003eSchematics\u003c\/li\u003e \u003cli\u003e3D File\u003c\/li\u003e \u003cli\u003eCAD File\u003c\/li\u003e \u003cli\u003eDimensions\u003c\/li\u003e \u003cli\u003eSchDoc\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x Terminal Block Board for Raspberry Pi Pico\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":43643759198269,"sku":"gcb1789693441503","price":18.11,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/terminal-block-board-for-raspberry-pi-pico_1.jpg?v=1789693446"},{"product_id":"power-filter-board-for-raspberry-pi","title":"Power Filter Board for Raspberry Pi","description":"\u003cp\u003eThis Power Filter Board integrates multiple solid capacitors, ceramic capacitors and tantalum capacitors to perform parallel hybrid filtering for your Raspberry Pi, ideal for those looking for the very best audio quality from their audio HAT!\u003c\/p\u003e\n\u003cp\u003eIt can filter low-mid-high frequency power noise on the power supply, which provides the whole system with a more stable power supply and makes sound quality purer.\u003c\/p\u003e\n\u003cp\u003eThe board can also effectively protect your Raspberry Pi so as to extend its service life.\u003c\/p\u003e\n\u003cp\u003eDirectly plug the module into the Raspberry Pi GPIO port for use. With a DC power cord, it can also supply power for the Raspberry Pi and other modules. When used with an audio decoder board, it turns the Raspberry Pi into a high-quality stereo.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Depending on the HAT you wish to use this board with, you may need to purchase a stacking header.\u003c\/p\u003e\n\u003ch2\u003eExample Installation\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/power-filter-board-example_1.jpg?v=1671207210\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFilter low-mid-high frequency power noise\u003c\/li\u003e\n\u003cli\u003eProvides a stable power supply\u003c\/li\u003e\n\u003cli\u003eEffectively protects the Raspberry Pi board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible models: Raspberry Pi 3B+\/4B\u003c\/li\u003e\n\u003cli\u003eOnboard capacity: 5526μF\u003c\/li\u003e\n\u003cli\u003eCapacitor connection: Parallel\u003c\/li\u003e\n\u003cli\u003ePower input: 5V\/3A\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eDimension: 56x65mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Raspberry Pi Power Filter Board\u003c\/li\u003e\n\u003cli\u003e4x Copper Pillar + Screw + Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and Audio HAT not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"DFRobot","offers":[{"title":"Default Title","offer_id":43643764736061,"sku":"ayl1789693857812","price":17.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/power-filter-board-for-raspberry-pi_1.jpg?v=1789693863"},{"product_id":"irrigation-board-for-raspberry-pi-pico","title":"Irrigation Board for Raspberry Pi Pico","description":"\u003cp\u003eLooking to build a Raspberry Pi Pico based smart irrigation system? The Raspberry Pi Pico Irrigation Board is just what you need! This board allows the Pico to operate with 12V power and control up to 5 solenoids (or other high current inductive loads) while providing numerous interfaces for sensors!\u003c\/p\u003e \u003cp\u003eThe Raspberry Pi Pico Irrigation Board is an all-in-one 5 channel MOSFET breakout complete with a DC power converter for the Raspberry Pi Pico and Pico W. This board allows the Pico to operate within a 12V system and switch high current inductive loads such as solenoids, pumps, or large relays. The Raspberry Pi Pico is connected using the castellated edges along the Pico, these are easily soldered with a conventional soldering iron. SMD Soldering Guide\u003c\/p\u003e \u003cp\u003eThe board has 5 individually controlled driver circuits complete with an LED indicator showing when it is triggered and an integrated snub diode to protect your project from any power spikes caused by inductive loads. We have also included three connection points for analog sensors and a connection point for a flow sensor, compatible with any of our three wire flow sensors. To further extend functionality, we have also included a Qwiic \/ STEMMA QT connector, allowing any compatible breakout board or sensor to connect to the board.\u003c\/p\u003e \u003cp\u003eBecause this is designed for irrigation, we have added an extra feature to each of the analog inputs. Beside each of these analog channels is a solder jumper; this is used to choose your 3.3V source. By default, this is set to the 3.3V power provided by an onboard regulator but we have also allowed each analog to be powered via a separate GPIO pin. This is done specifically for soil moisture sensors and helps prevent unnecessary corrosion caused when the sensor is powered in moist soil. Since the sensors draw a very tiny amount of voltage, they can be powered this way. Simply trip the connected GPIO pin HIGH and read the analog sensor, and turn off the pin.\u003c\/p\u003e \u003cp\u003eFinally, we have an extra I2C connection point broken out to a 0.100″\/2.54mm pitch footprint – great if you want to use larger I2C based soil moisture sensors like the Adafruit STEMMA Soil Moisture Sensor.\u003c\/p\u003e \u003cp\u003eTo make mounting as easy as possible, the Raspberry Pi Pico Irrigation Board is designed to fit in a standard Hammond 1591B enclosure.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e: Raspberry Pi Pico is \u003cstrong\u003enot\u003c\/strong\u003e included.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eInput Voltage: 7 – 15VDC\u003c\/li\u003e \u003cli\u003eQwiic \/ STEMMA QT connector\u003c\/li\u003e \u003cli\u003ePico and Pico W compatible\u003c\/li\u003e \u003cli\u003e5 Independent Control Circuits\u003c\/li\u003e \u003cli\u003eCompatible with Analog or I2C Soil Moisture Sensors\u003c\/li\u003e \u003cli\u003ePlug and Play flow sensor connection\u003c\/li\u003e \u003cli\u003eLEDs to indicate activated channels\u003c\/li\u003e \u003cli\u003eDimensions 90 × 50 × 20 mm\u003c\/li\u003e \u003cli\u003eWeight 40 g\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x Raspberry Pi Pico Irrigation Board\u003c\/li\u003e \u003c\/ul\u003e","brand":"BCRobotics","offers":[{"title":"Default Title","offer_id":43643766571069,"sku":"flf1789693993461","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/irrigation-board-for-raspberry-pi-pico_1.jpg?v=1789693997"},{"product_id":"picoadc16-16-port-adc-for-pico","title":"PicoADC16 - 16-port ADC for Pico","description":"\u003cp\u003eThe 8086 PicoADC16 is a 16-port ADC board for the Raspberry Pi Pico with screw terminals using two 8-port MCP3008 10-bit Analogue to Digital converters connected to the Pico using an SPI interface.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe maximum input voltage for the ADC is 3.3 Volts, however, \u003cstrong\u003ecan be used with voltages higher than 3.3V when resistors (not-supplied) are soldered onto the board.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe two MCP3008 ADC IC are banked A0-A7 (set chip enable \"SPI CE A\" low) and B0-B7 (set chip enable \"SPI CE B\" low). On each side of the board there are 10 screw terminals \"GND, A0, A1, A2, A3, A4, A5, A6, A7, GND\" and \"GND, B0, B1, B2, B3, B4, B5, B6, B7, GND\".\u003c\/p\u003e\n\u003ctable width=\"377\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"189\"\u003e\u003cstrong\u003ePico GPIO\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"188\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP4\u003c\/td\u003e\n\u003ctd\u003eSPI RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP3\u003c\/td\u003e\n\u003ctd\u003eSPI TX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP2\u003c\/td\u003e\n\u003ctd\u003eSPI Clock\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP1\u003c\/td\u003e\n\u003ctd\u003eSPI CE A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP17\u003c\/td\u003e\n\u003ctd\u003eSPI CE B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResistor Divider (when measuring voltages greater than 3.3 Volts)\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/picoadc16-rear_1.jpg?v=1672413826\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEach of the 16 ADC inputs has the option to use two through-hole resistors (RxxL and RxxH) to create a voltage divider.\u003c\/p\u003e\n\u003cp\u003eThe formula to calculate the voltage at the ADC is \"Vadc = RxxL \/ ( RxxH + RxxL ) * Vscrew\". When using the voltage divider cut the appropriate solder jumper on the bottom of the board for that port (e.g. for port B4 you would populate resistors RB4H and RB4L and cut the B4 trace on the underside of the board).\u003c\/p\u003e\n\u003cp\u003eFor example to measure up to 60 volts DC you could use a 2.7k resistor for RxxH and 47K resistor for RxxL (care must be taken when using with high voltages).\u003c\/p\u003e\n\u003cp\u003e2700 \/ ( 2700 + 47000 ) * 60 = 3.25955 which is below the 3.3 Volt maximum input for the ADC.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: After populating the resistors and cutting the solder jumper I strongly advise testing with a 3.3 Volt maximum input to ensure the solder jumper has been cut properly as connecting a high voltage to the input may damage the PicoADC16 and\/or Pico.\u003c\/p\u003e\n\u003ch2\u003eCode Examples\u003c\/h2\u003e\n\u003ch3\u003eCircuitPython\u003c\/h3\u003e\n\u003cp\u003eThe example below requires the adafruit_mcp3xxx library is saved in the lib folder on the CIRCUITPY drive to work.\u003c\/p\u003e\n\u003cpre\u003e\u003ccode class=\"language-py\"\u003eimport busio\nimport digitalio\nimport board\nimport time\nimport adafruit_mcp3xxx.mcp3008 as MCP\nfrom adafruit_mcp3xxx.analog_in import AnalogIn\n\n# SPI bus\nspi = busio.SPI(clock=board.GP2, MISO=board.GP4, MOSI=board.GP3)\n\n# Voltage Multiplier\nvdm = 3.3\/65536\n\n# Chip select pins\ncs1 = digitalio.DigitalInOut(board.GP1)\ncs2 = digitalio.DigitalInOut(board.GP17)\n\n# create the mcp objects\nmcp1 = MCP.MCP3008(spi, cs1)\nmcp2 = MCP.MCP3008(spi, cs2)\n\nadc_a = {}\nadc_b = {}\n\n# create analog input channels\nadc_a[0] = AnalogIn(mcp1, MCP.P0)\nadc_a[1] = AnalogIn(mcp1, MCP.P1)\nadc_a[2] = AnalogIn(mcp1, MCP.P2)\nadc_a[3] = AnalogIn(mcp1, MCP.P3)\nadc_a[4] = AnalogIn(mcp1, MCP.P4)\nadc_a[5] = AnalogIn(mcp1, MCP.P5)\nadc_a[6] = AnalogIn(mcp1, MCP.P6)\nadc_a[7] = AnalogIn(mcp1, MCP.P7)\n\nadc_b[0] = AnalogIn(mcp2, MCP.P0)\nadc_b[1] = AnalogIn(mcp2, MCP.P1)\nadc_b[2] = AnalogIn(mcp2, MCP.P2)\nadc_b[3] = AnalogIn(mcp2, MCP.P3)\nadc_b[4] = AnalogIn(mcp2, MCP.P4)\nadc_b[5] = AnalogIn(mcp2, MCP.P5)\nadc_b[6] = AnalogIn(mcp2, MCP.P6)\nadc_b[7] = AnalogIn(mcp2, MCP.P7)\n\ntest = digitalio.DigitalInOut(board.GP16)\ntest.direction = digitalio.Direction.OUTPUT\n\nwhile 1:\n\t# Clear the screen\n\tprint(\"\\033[2J\\033[H\", end=\"\")\n\tfor i in adc_a:\nprint('A'+str(i)+':', adc_a[i].value*vdm)\n\tprint(\"\")\n\tfor i in adc_b:\nprint('B'+str(i)+':', adc_b[i].value*vdm)\n\ttest.value = not test.value\n\ttime.sleep(0.3)\n\u003c\/code\u003e\u003c\/pre\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":43643766603837,"sku":"ojs1789693995267","price":15.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/picoadc16---16-port-adc-for-pico_1.jpg?v=1789694000"},{"product_id":"cm4-to-4b-adapter","title":"CM4 to 4B Adapter","description":"\u003cp\u003eIf you're lucky enough to have a Compute Module 4 lying around and you would prefer the Raspberry Pi 4 format - this board is for you!\u003c\/p\u003e\n\u003cp\u003eThis adapter board accepts your Raspberry Pi Compute Module 4 and converts it to the Raspberry Pi 4 format (along \u003cstrong\u003ewith a few perks\u003c\/strong\u003e) - 2x MicroHDMI, 1x USB-C, 4x USB 3.0, full 40-pin colour-coded GPIO header, Gigabit Ethernet, PoE header, CSI\/DSI ports, Micro-SD slot, fan header and a boot selection switch.\u003c\/p\u003e\n\u003cp\u003eWe're really digging the \u003cstrong\u003e4x USB 3.0 ports\u003c\/strong\u003e and the option to use a CM4 with onboard storage to \u003cstrong\u003eavoid the use of a MicroSD card\u003c\/strong\u003e - and that \u003cstrong\u003e5V fan header\u003c\/strong\u003e will be dead handy too.\u003c\/p\u003e\n\u003cp\u003eA product wiki is on hand to help with a few setup considerations, but other than that it's good to go.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCM4 is not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eAdapt them all!\u003c\/h2\u003e\n\u003cp\u003eWe have a few other options in the store if you're into this \u003cem\u003eCM4 adapting life\u003c\/em\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCM4 to 3B adapter\u003c\/li\u003e\n\u003cli\u003eCM4 to CM3 adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOnboard standard CM4 connector, support access to CM4 Lite \/ eMMc series\u003c\/li\u003e\n\u003cli\u003eEasily compatible with the interfaces of Raspberry Pi 4 B board\u003c\/li\u003e\n\u003cli\u003e4x USB 3.0 ports, compatible with USB 2.0 \/ 1.1 transmission\u003c\/li\u003e\n\u003cli\u003eRJ45 Gigabit Ethernet port, 10 \/ 100 \/ 1000 M adaptive\u003c\/li\u003e\n\u003cli\u003ePoE header, for connecting PoE HATs\u003c\/li\u003e\n\u003cli\u003eColour-coded GPIO header\u003c\/li\u003e\n\u003cli\u003eBoot selection switch\u003c\/li\u003e\n\u003cli\u003e2x micro-HDMI\u003c\/li\u003e\n\u003cli\u003eUSB-C for power supply (can be used as the USB SLAVE interface for programming images)\u003c\/li\u003e\n\u003cli\u003eCSI port for Raspberry Pi Camera Module\n\u003c\/li\u003e\n\u003cli\u003eDSI port for Raspberry Pi Touch Display 2\n\u003c\/li\u003e\n\u003cli\u003eFan header\u003c\/li\u003e\n\u003cli\u003eMicroSD slot\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOnboard Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/23508-features_1.jpg?v=1675884830\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ctable width=\"630\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"78\"\u003e\u003cstrong\u003eNo.\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"187\"\u003e\u003cstrong\u003eName\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"365\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003eCM4 socket\u003c\/td\u003e\n\u003ctd\u003eFor all variants of Compute Module 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e40-pin GPIO header\u003c\/td\u003e\n\u003ctd\u003eFor connecting to all HATs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3\u003c\/td\u003e\n\u003ctd\u003ePoE\u003c\/td\u003e\n\u003ctd\u003eSupport access to PoE HAT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003ctd\u003eGigabit Ethernet port\u003c\/td\u003e\n\u003ctd\u003eSupports 10 \/ 100 \/ 1000M network\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5,6\u003c\/td\u003e\n\u003ctd\u003eUSB3.0 interface\u003c\/td\u003e\n\u003ctd\u003e4x USB3.0 interface, support USB devices\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e7\u003c\/td\u003e\n\u003ctd\u003eFAN header\u003c\/td\u003e\n\u003ctd\u003eFor 5V fan. Does not support speed regulation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e8\u003c\/td\u003e\n\u003ctd\u003eHDMI interface\u003c\/td\u003e\n\u003ctd\u003e2 x Micro HDMI interface, supports 4K 30fps output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e9\u003c\/td\u003e\n\u003ctd\u003eUSB Type C\u003c\/td\u003e\n\u003ctd width=\"365\"\u003e5V\/2.5A power supply\u003cbr\u003eCan also be used for eMMC programming\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10\u003c\/td\u003e\n\u003ctd\u003eLED indicator\u003c\/td\u003e\n\u003ctd\u003eIndicating the working status of the Raspberry Pi\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e11\u003c\/td\u003e\n\u003ctd rowspan=\"2\"\u003eBOOT\u003c\/td\u003e\n\u003ctd\u003eONCM4 USB Type C booting guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOFF： eMMC or SD card boot guide\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e12\u003c\/td\u003e\n\u003ctd\u003eCAM interface\u003c\/td\u003e\n\u003ctd\u003eMIPI CSI interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e13\u003c\/td\u003e\n\u003ctd\u003eMicro SD card slot\u003c\/td\u003e\n\u003ctd\u003eOnly for the Lite CM4 usage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e14\u003c\/td\u003e\n\u003ctd\u003eDISP1 interface\u003c\/td\u003e\n\u003ctd\u003eMIPI DSI interface, DISP1 interface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003ctd\u003eIO-VREF selection\u003c\/td\u003e\n\u003ctd\u003eCM4 IO logic voltage switch 3.3V or 1.8V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"2\"\u003e16\u003c\/td\u003e\n\u003ctd rowspan=\"2\"\u003eFunction pin\u003c\/td\u003e\n\u003ctd\u003eRUN: CM4 running status pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGL-EN: Power supply enable pin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd rowspan=\"3\"\u003e17\u003c\/td\u003e\n\u003ctd rowspan=\"3\"\u003eSystem function switch\u003c\/td\u003e\n\u003ctd\u003eBT_DIS: Bluetooth disabled,  for CM4 with antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWiFi_DIS: WiFi disabled,  for CM4 with antenna\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWP_DIS: EEPROM write protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CM4 to Pi4 Adapter\u003c\/li\u003e\n\u003cli\u003e1x Screws pack (attached to the board)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCM4 is not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643770929213,"sku":"ell1789694308871","price":16.56,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/cm4-to-4b-adapter_1.jpg?v=1789694312"},{"product_id":"can-bus-module-b-for-raspberry-pi-pico","title":"CAN Bus Module (B) for Raspberry Pi Pico","description":"\u003cp\u003eThis CAN module for the Raspberry Pi Pico enables reliable long-range communication with other devices without a host computer. CAN is used in endless devices, commonly in vehicles.\u003c\/p\u003e\n\u003cp\u003eThe board utilises a second-generation MCP2515 CAN controller and a 3.3V SN65HVD230DR CAN transceiver. Onboard jumpers allow terminal resistor selection for the onboard 120-ohm resistor.\u003c\/p\u003e\n\u003cp\u003eOnline resources are available which include some demo code to get you started.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico is not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi Pico series and compatible boards\u003c\/li\u003e\n\u003cli\u003eCAN function\u003c\/li\u003e\n\u003cli\u003eSPI interface\u003c\/li\u003e\n\u003cli\u003eMCP2515 CAN controller\u003c\/li\u003e\n\u003cli\u003eSN65HVD230DR Transceiver \u003c\/li\u003e\n\u003cli\u003eOnline development resources and manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's Onboard?\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CAN_bus_Module_B_for_Raspberry_Pi_Pico_features_1.jpg?v=1679697956\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1) RT9013-33GB\u003c\/strong\u003e\u003cbr\u003e - 500mA low dropout, low noise, ultra-fast LDO\u003cbr\u003e\u003cstrong\u003e2) MCP2515\u003c\/strong\u003e\u003cbr\u003e - Second generation standalone CAN controller\u003cbr\u003e\u003cstrong\u003e3) SN65HVD230DR\u003c\/strong\u003e\u003cbr\u003e - 3.3V CAN transceiver\u003cbr\u003e\u003cstrong\u003e4) Terminal resistor selection\u003c\/strong\u003e\u003cbr\u003e - ON: connected to 120R matching resistor\u003cbr\u003e - OFF: disconnected from 120R matching resistor\u003cbr\u003e\u003cstrong\u003e5) CAN bus terminal\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"383\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"197\"\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd width=\"186\"\u003e3.3V~5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan Controller\u003c\/td\u003e\n\u003ctd\u003eMCP2515\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCan Transceiver\u003c\/td\u003e\n\u003ctd\u003eSN65HVD230DR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Bus\u003c\/td\u003e\n\u003ctd\u003eSPI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaudrate\u003c\/td\u003e\n\u003ctd\u003e5K~1000Kbps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e52 x 21mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CAN Bus Module (B) for Raspberry Pi Pico\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CAN_bus_Module_B_for_Raspberry_Pi_Pico_pinout_1.jpg?v=1679697259\u0026amp;width=700\"\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643777548349,"sku":"faq1789694917665","price":11.25,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/can-bus-module-b-for-raspberry-pi-pico_1.jpg?v=1789694923"},{"product_id":"nano-base-board-c-for-raspberry-pi-cm4","title":"Nano Base Board (C) for Raspberry Pi CM4","description":"\u003cp\u003eThe Nano Base Board (C) from Waveshare is a compact carrier board for your Raspberry Pi Compute Module 4 (CM4) which includes an 8MP IMX219 camera module alongside a host of other features, great for evaluating the CM4 or prototyping a Compute Module project.\u003c\/p\u003e\n\u003cp\u003eYour CM4 simply clicks into the carrier board and can be powered by the USB-C port, which can also be used for programming.\u003c\/p\u003e\n\u003cp\u003eYou then have access to the other great features of this board: Colour-coded 40-pin GPIO header, Mini-HDMI (4K 30fps), USB 2.0 port for peripherals, DSI port for a DSI display, Micro-SD slot for storage, programmable button and a BOOT selection switch. There are also activity LEDs for both data and power.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCompatible with Raspberry Pi CM4\u003c\/li\u003e\n\u003cli\u003eOnboard 8MP IMX219 camera module (160° FoV)\u003c\/li\u003e\n\u003cli\u003eMini HDMI (4k 30FPS)\u003c\/li\u003e\n\u003cli\u003eDSI port\u003c\/li\u003e\n\u003cli\u003eUSB 2.0 port\u003c\/li\u003e\n\u003cli\u003eMicro-SD slot\u003c\/li\u003e\n\u003cli\u003eColour-coded GPIO header\u003c\/li\u003e\n\u003cli\u003eProgrammable button\u003c\/li\u003e\n\u003cli\u003eBOOT switch\u003c\/li\u003e\n\u003cli\u003eActivity + Power LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's On Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Nano_Base_Board_C_features_1.jpg?v=1681480855\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1) CM4 socket\u003c\/strong\u003e\u003cbr\u003e - Suitable for all variants of Compute Module 4\u003cbr\u003e\u003cstrong\u003e2) Mini HDMI port\u003c\/strong\u003e\u003cbr\u003e - Supports 4K 30fps output\u003cbr\u003e\u003cstrong\u003e3) DSI port\u003c\/strong\u003e\u003cbr\u003e - MIPI DSI display interface\u003cbr\u003e\u003cstrong\u003e4) USB2.0 port\u003c\/strong\u003e\u003cbr\u003e - For connecting USB devices\u003cbr\u003e\u003cstrong\u003e5) TF card slot\u003c\/strong\u003e\u003cbr\u003e - For connecting a TF card with pre-burnt image (Lite variant ONLY)\u003cbr\u003e\u003cstrong\u003e6) Power supply \/ Programming\u003c\/strong\u003e\u003cbr\u003e - 5V power supply, or used for eMMC burning\u003cbr\u003e\u003cstrong\u003e7) 40-pin GPIO header\u003c\/strong\u003e\u003cbr\u003e - For connecting HATs\u003cbr\u003e\u003cstrong\u003e8) IMX219-D160 Camera\u003c\/strong\u003e\u003cbr\u003e - 8MP, 160° FOV\u003cbr\u003e\u003cstrong\u003e9) User button\u003c\/strong\u003e\u003cbr\u003e - Connect to GPIO21\u003cbr\u003e\u003cstrong\u003e10) BOOT switch\u003c\/strong\u003e\u003cbr\u003e - ON: Switch USB to Type C interface, will enter download mode when powered on (configured as a large-capacity disk through RPI boot)\u003cbr\u003e - OFF: Switch USB to Type A interface, will not enter download mode when powered on (booted from eMMC or TF card)\u003cbr\u003e\u003cstrong\u003e11) ACT Indicator\u003c\/strong\u003e\u003cbr\u003e - CM4 working status\u003cbr\u003e\u003cstrong\u003e12) PWR Indicator\u003c\/strong\u003e\u003cbr\u003e - CM4 power status\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"500\" style=\"height: 171px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eCM4 Socket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eSuitable for all variants of Compute Module 4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eConnector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eRaspberry Pi 40PIN GPIO header × 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eUSB 2.0 Type A port × 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eDisplay\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eMIPI DSI port × 1 (15pin 1.0mm FPC connector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eCamera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eIMX219-D160 (8MP, 160°FOV)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eMini HDMI port × 1, supports 4K 30fps output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003eTF card socket for CM4 Lite (without eMMC) variants\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003ePower Input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003e5V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19px;\"\u003e\n\u003ctd style=\"height: 19px; width: 130.469px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 19px; width: 360.099px;\"\u003e55.0 × 40.0mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003cli\u003eSTEP File\u003c\/li\u003e\n\u003cli\u003eSTL (3D Printed Case)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Nano Base Board (C)\u003c\/li\u003e\n\u003cli\u003e1x IMX219 Camera Module\u003c\/li\u003e\n\u003cli\u003e1x 40-pin colour-coded header\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCompute Module 4 not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643777744957,"sku":"dvm1789694932387","price":26.78,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/nano-base-board-c-for-raspberry-pi-cm4_1.jpg?v=1789694937"},{"product_id":"i2c-hat-adapter-for-uno-nano-teensy-feather-and-esp32","title":"I2C HAT Adapter for Uno, Nano, Teensy, Feather and ESP32","description":"\u003cp\u003eThis I2C HAT Adapter Kit lets you \u003cstrong\u003euse I2C-based Raspberry Pi HATs and add-on boards with a range of different development boards\u003c\/strong\u003e - 'replace' the Raspberry Pi with the Arduino Uno\/Nano, Teensy, Feather or generic ESP32 boards!\u003c\/p\u003e\n\u003cp\u003eLet's be clear -\u003cstrong\u003e it's not a HAT\u003c\/strong\u003e, but it allows you to use I2C HATs with other development boards!\u003c\/p\u003e\n\u003cp\u003eThe adapter card has the same form factor as the Raspberry Pi and an identical 2x20 pin connector where you can \u003cstrong\u003eplug any Raspberry Pi HAT which uses the I2C port for communication\u003c\/strong\u003e. On the opposite side, the card has male or female socket adapters where you can plug the replacement processor.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAssembly\/soldering required!\u003c\/strong\u003e Since the card can accommodate five different families of processors, it comes unassembled. You will need to solder the 2x20 pin connecting to any Raspberry Pi add-on card, two pull-up resistors on the I2C lines, and the connectors that fit your target processor.\u003c\/p\u003e\n\u003ch2\u003eAssembly\u003c\/h2\u003e\n\u003cp\u003eIn all configurations, the 2x20 pin connector is installed on top and the processor adaptor connectors are on the bottom. The 2 pull-up resistors can be installed on either side. See below for more info.\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Bare PCB adapter board\u003c\/li\u003e\n\u003cli\u003e1x 2x20 Male Pin Header\u003c\/li\u003e\n\u003cli\u003e2x 1x16 Female Headers\u003c\/li\u003e\n\u003cli\u003e1x 1x40 Breakable Male Pin Header\u003c\/li\u003e\n\u003cli\u003e2x 2.2K resistors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDevelopment boards not included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDev Board Replacements\u003c\/h2\u003e\n\u003cp\u003ePlease see the user guide for diagrams showing the board and pin placements for the following instructions:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing Raspberry Pi with Teensy\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolder the R1 and R2 resistors and the 2x20 pin connector. If your TEENSY does not have the pins soldered, you can break two 14-pin sections from the 40-pin male header provided and solder the TEENSY directly on the J2 connector.\u003c\/p\u003e\n\u003cp\u003eIf the TEENSY has the pins soldered, break 2 pins from each of the 16-pin female headers provided, and solder the female headers into the J2 connector. Plug the TEENSY into J2 connector.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing Raspberry Pi with Arduino Uno\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolder the R1 and R2 resistors and the 2x20 pin connector. Break the 40-pin male header provided into 6, 2 x 8, and 10 pins. Solder the breakout pins on the footprint of connector J4. Plug the UNO into the J4 connectors and secure with standoffs (not provided), if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing Raspberry Pi with ESP32\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolder the R1 and R2 resistors and the 2x20 pin connector. If your ESP32 does not have the pins soldered, you can break two 15-pin sections from the 40-pin male header provided and solder the board directly on the J3 connector.\u003c\/p\u003e\n\u003cp\u003eIf the board has pins soldered, break 1 pin from each of the 16-pin female headers provided, and solder the female headers into the J6 connector. Secure the ESP32 processor with stand-offs (not provided) if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing Raspberry Pi with Feather\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolder the R1 and R2 resistors and the 2x20 pin connector. If your Feather does not have the pins soldered, you can break a 12-pin and a 16-pin section from the 40-pin male header provided and solder the Feather directly on the J3 connector.\u003c\/p\u003e\n\u003cp\u003eIf the Feather has the pins soldered, break 4 pins from one of the 16-pin female headers provided, and solder the female headers into the J3 connector as shown. Plug the Feather into the J3 connector and secure it with extra stand-offs (not provided) if necessary.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReplacing Raspberry Pi with Arduino Nano\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSolder the R1 and R2 resistors and the 2x20 pin connector. Cut or pull one end pin of the two 16-pin female headers provided. Solder the female headers on the footprint of connector J5. Plug the NANO into the J5 connectors.\u003c\/p\u003e\n\u003ch2\u003eDownloads\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUser guide\u003c\/li\u003e\n\u003cli\u003eOpen Source hardware Schematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware for Sequent Cards\u003c\/h2\u003e\n\u003cp\u003eYou can write your own application for the 8-Relays \/ 8-MOSFETs cards using the 8-Relays and 8-Mosfets Arduino Libraries. More libraries will be available soon.\u003c\/p\u003e\n\u003cp\u003eThe libraries only work with Teensy 3.2\/3.5\/3.6\/4.0\/4.1, Arduino Uno, Arduino Nano, Adafruit Feather and ESP32 DEVKIT V1. The main reason for this is the electrical and mechanical constraints of the S-BRIDGE card. If your favourite processor is not on the list, you also can use it if it has an I2C port, but you need to connect the I2C port directly to the card.\u003c\/p\u003e","brand":"Sequent","offers":[{"title":"Default Title","offer_id":43643780956221,"sku":"pgl1789695076901","price":10.04,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/i2c-hat-adapter-for-uno-nano-teensy-feather-and-esp32_1.jpg?v=1789695087"},{"product_id":"adafruit-picowbell-can-bus-for-pico-mcp2515-can-controller","title":"Adafruit PiCowbell CAN Bus for Pico - MCP2515 CAN Controller","description":"\u003cp\u003eDing dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell CAN Bus is in stock and ready to assist your Raspberry Pi Pico and Pico W project connect to CAN bus networks for automotive or robotics projects.\u003c\/p\u003e\n\u003cp\u003eCAN Bus is a small-scale networking standard, originally designed for cars and, yes, busses, but is now used for many robotics or sensor networks that need better range and addressing than I2C and don't have the pins or computational ability to talk on Ethernet. CAN is 2 wire differential, which means it's good for long distances and noisy environments.\u003c\/p\u003e\n\u003cp\u003eMessages are sent at about 1Mbps rate - you set the frequency for the bus and then all 'joiners' must match it, and have an address before the packet so that each node can listen in to messages just for it. New nodes can be attached easily because they just need to connect to the two data lines anywhere in the shared net. Each CAN device sends messages whenever it wants, and thanks to some clever data encoding, can detect if there's a message collision and retransmit later.\u003c\/p\u003e\n\u003cp\u003eIf you'd like to connect your Raspberry Pi Pico to a CAN Bus, the Adafruit PiCowbell CAN Bus has an MCP2515 controller and TJA1051\/3 transceiver! The controller is the MCP2515, an extremely popular and well-supported chipset with drivers in Arduino and CircuitPython and only requires an SPI port and two pins for chip-select and IRQ. Use it to send and receive messages in either standard or extended format at up to 1 Mbps.\u003c\/p\u003e\n\u003cp\u003eWe've added a few nice extras to this PiCowBell to make it useful in many common CAN scenarios:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n5V charge-pump voltage generator, so even though you are running 3.3V on a Pico board, it will generate a nice clean 5V as required by the transceiver.\u003c\/li\u003e\n\u003cli\u003e\n3.5mm terminal block pre-soldered in to get quick access to the High and Low data lines as well as a ground pin.\u003c\/li\u003e\n\u003cli\u003e120-ohm termination resistor on board, you can remove the termination easily by cutting the jumper marked Term on the top of the board.\u003c\/li\u003e\n\u003cli\u003ePre-connected CS and INT pins on Pico GPIO #20 and #21. You can cut the bottom solder jumpers and use the breakout pads to connect to any two IO pins you like\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEach order comes with an assembled PCB and header. You will need to solder in the header yourself, but it's a quick task.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note\u003c\/strong\u003e! There are a lot of possible configurations, and we stock various headers depending on how you want to solder and attach them. Especially if you want the Pico on top so that the BOOTSEL button and LED are accessible.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Pico Stacking Headers if you want to be able to plug into a breadboard or other accessory with sockets.\u003c\/li\u003e\n\u003cli\u003eUse the Pico Socket Headers if you want to plug directly in and have a nice solid connection that doesn't have any poking-out bits.\u003c\/li\u003e\n\u003cli\u003eUse the Short Socket Headers for a very slim but pluggable design; note that you'll want to trim down the Pico's headers or use the short plug headers on the Pico to have a skinny sandwich.\u003c\/li\u003e\n\u003cli\u003eSolder the PCB directly to the Pico headers - of course, this is very compact and inexpensive, but you won't be able to remove the PiCowbell.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe PiCowbell CAN Bus provides you with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle JST SH connector for I2C \/ Stemma QT \/ Qwiic connection. Provides 3V, GND, IO4 (SDA), and IO5 (SCL)\u003c\/li\u003e\n\u003cli\u003eReset button - Press to restart your program\u003c\/li\u003e\n\u003cli\u003eEvery pad on the 'bell has a duplicate hole pad next to them for solder-jumpering\u003c\/li\u003e\n\u003cli\u003eThe ground pads have white silkscreen rectangles to easily identify, plus one long ground strip near the reset button\u003c\/li\u003e\n\u003cli\u003eGold-plated pads for easy soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf using the Philhower Arduino core, the Wire peripheral is already set up to use IO4 and IO5, and SPI defaults on IO16, IO18 and IO19. If using CircuitPython or MicroPython, you'll need to let the code know to look at 4+5 for SDA+SCL pins and configure the SPI port for SCK=18, MOSI=19 and MISO=16.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/qP5rhWIsc4w?start=236\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBitrate Max [MBits\/s] - 1\u003c\/li\u003e\n\u003cli\u003eCAN Controllers - 1\u003c\/li\u003e\n\u003cli\u003eInternal CAN Clock - No\u003c\/li\u003e\n\u003cli\u003eLPM Current Max [uA] - 0\u003c\/li\u003e\n\u003cli\u003eMessage RAM [KB] - 0\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Min. [V] - 2.7\u003c\/li\u003e\n\u003cli\u003eOperating Voltage Max. [V] - 5.5\u003c\/li\u003e\n\u003cli\u003eRx Buffers - 2\u003c\/li\u003e\n\u003cli\u003eSPI Interface - Yes\u003c\/li\u003e\n\u003cli\u003eSerial Bus Speed [MHz] - 10\u003c\/li\u003e\n\u003cli\u003eStandby Current Max [uA] - 0\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Min. [°C] -40\u003c\/li\u003e\n\u003cli\u003eOperating Temperature Max. [°C] - 125\u003c\/li\u003e\n\u003cli\u003eTime Stamp (Bits) - 0\u003c\/li\u003e\n\u003cli\u003eTX Buffers - 3\u003c\/li\u003e\n\u003cli\u003eTX Event FIFO - 0\u003c\/li\u003e\n\u003cli\u003eTX Queue - 0\u003c\/li\u003e\n\u003cli\u003eCAN FD - No\u003c\/li\u003e\n\u003cli\u003eProduct Dimensions: 52.0mm x 20.2mm x 10.0mm\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 5.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eMCP2515 Specifications\u003c\/li\u003e\n\u003cli\u003eTJA1051\/3 Datasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643781087293,"sku":"itd1789695088179","price":10.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/adafruit-picowbell-can-bus-for-pico---mcp2515-can-controller_1.jpg?v=1789695093"},{"product_id":"kitronik-zip96-retro-gamer-for-raspberry-pi-pico","title":"Kitronik ZIP96 Retro Gamer for Raspberry Pi Pico","description":"\u003cp\u003eDevelop your coding skills with the Kitronik ZIP96 Retro Gamer for Pico, 'the' all-in-one handheld solution for Pico gaming! \u003cstrong\u003eRaspberry Pi Pico not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Kitronik ZIP96 is a fully programmable feature-packed retro-styled handheld gaming solution for the Raspberry Pi Pico. It's fully loaded with awesome features, including a 96 LED display, that can be fully controlled with code for a complete gaming experience. Kitronik has developed a set of lesson plans for this product, that enables successful Computing lessons at KS3\/4 (US equivalent - Grades 6-8\/9-10). Though developed for use in the classroom, the ZIP96 Retro Gamer is ideal for anyone who already has a Pico or sees a Pico in their immediate future.\u003c\/p\u003e\n\u003cp\u003eThe ZIP96 features 96 colour fully addressable LEDs arranged in a 12 x 8 display, a buzzer for audio feedback, a vibration motor for haptic feedback, and 6 input buttons (typical use; 4 x directional buttons and 2 x action buttons). It also breaks out GP1, GP11, ADC1 and ADC2, along with a set of 3.3V and GND for each, to standard 0.1” footprints. GP18 to 21 are also broken out on a 0.1” footprint underneath the Pico. The Pico is connected via low-profile 20-way pin sockets.\u003c\/p\u003e\n\u003cp\u003eTo use the ZIP96 Gamer the Pico should have a soldered pin header and be inserted firmly into the connector. The ZIP96 does not ship with a Pico, Pico with soldered headers are available separately here. The Pico pins will stick through the board slightly as the pin sockets are low-profile.\u003c\/p\u003e\n\u003cp\u003ePower is provided via the built-in 3 individual AA battery holders which have been ergonomically placed on the underside of the board to act as hand grips, which makes the ZIP96 comfortable to hold and play.\u003c\/p\u003e\n\u003cp\u003eKitronik has developed a MicroPython module and sample code to support using the ZIP96 Gamer with the Pico. This code is available from our GitHub repo here. The module is available on PyPI in Thonny, details on how to add and manage modules from PyPI in Thonny can be found here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis handheld gamer is supplied fully assembled, just add power, a Pico, and some code.\u003c\/li\u003e\n\u003cli\u003eThe ZIP96 \u003cstrong\u003edoes not ship with a Pico\u003c\/strong\u003e, Pico with pre-soldered headers are available separately here\n\u003c\/li\u003e\n\u003cli\u003eYou will need batteries installed to power the LED matrix\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Kitronik_ZIP96_Retro_Gamer_for_Raspberry_Pi_Pico_features_1.jpg?v=1686138010\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA feature-packed all-in-one retro-styled handheld gaming solution for the Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003ePacked with awesome features that can be controlled with code for the ultimate handheld pico gaming experience\u003c\/li\u003e\n\u003cli\u003eThe ZIP96 features 96 colour fully addressable LEDs arranged in a 12 x 8 display\u003c\/li\u003e\n\u003cli\u003eThe board features a built-in buzzer for audio feedback and a vibration motor for haptic feedback\u003c\/li\u003e\n\u003cli\u003eThere are 6 input buttons (typical use; 4 x directional buttons and 2 x fire buttons)\u003c\/li\u003e\n\u003cli\u003eIt also breaks out GP1, GP11, ADC1 and ADC2, along with a set of 3.3V and GND for each, to standard 0.1” footprints. GP18 to 21 are also broken out on a 0.1” footprint underneath the Pico\u003c\/li\u003e\n\u003cli\u003eThe Pico is connected via pre-fitted low-profile 20-way pin sockets\u003c\/li\u003e\n\u003cli\u003eErgonomically placed AA battery holders that power the board AND function as comfortable handgrips\u003c\/li\u003e\n\u003cli\u003eKitronik has a Github repo containing MicroPython module and sample code to support using the ZIP96 Gamer with the Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003eKitronik has produced a set of lesson plans to enable successful Computing lessons at KS3\/4 (US equivalent - Grades 6-8\/9-10). The Datasheet provides additional usage information, electrical specifications, and dimensions\u003c\/li\u003e\n\u003cli\u003eThe module is available on PyPI in Thonny, details on how to add and manage modules from PyPI in Thonny can be found here\n\u003c\/li\u003e\n\u003cli\u003eDimensions:\n\u003cul\u003e\n\u003cli\u003eLength: 141mm\u003c\/li\u003e\n\u003cli\u003eWidth: 60mm\u003c\/li\u003e\n\u003cli\u003eHeight: 24.6mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"\/\/www.youtube.com\/embed\/xdvs5gY0pRo\" height=\"315\" width=\"560\" allowfullscreen=\"allowfullscreen\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Kitronik ZIP96 Retro Gamer for Raspberry Pi Pico\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePico with pre-soldered headers or Pico W with pre-soldered headers\u003c\/li\u003e\n\u003cli\u003e3 x AA Batteries\u003c\/li\u003e\n\u003cli\u003e1 x Micro-USB Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nMicroPython module and sample code repo.\u003c\/li\u003e\n\u003cli\u003e\nTwo-player game design for the ZIP96 \u0026amp; Pico W.\u003c\/li\u003e\n\u003cli\u003eLesson Plans - Amazing Game\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHow to add and manage modules from PyPI in Thonny\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":43643785871421,"sku":"edc1789695302938","price":15.53,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kitronik-zip96-retro-gamer-for-raspberry-pi-pico_1.jpg?v=1789695315"},{"product_id":"adafruit-picowbell-dvi-output-for-pico","title":"Adafruit PiCowbell DVI Output for Pico","description":"\u003cp\u003eDing dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell DVI Output for Pico is in stock and ready to display images and graphics from a microcontroller directly to an HDMI monitor or television! Note it doesn't do audio, just graphics.\u003c\/p\u003e\n\u003cp\u003eThe PiCowbell DVI is the same size and shape as a Pico and is intended to socket underneath to make your next video output project super easy. Mini HDMI connector for use with standard HDMI cables? Yes! STEMMA QT \/ Qwiic connector for fast I2C? Indeed. Reset button \u0026amp; extra switch for restarting code or changing configuration? Bien sur.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"https:\/\/www.youtube.com\/embed\/1ucZPk2HjPI?start=132\" title=\"YouTube video player\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRight angle JST SH connector for I2C \/ Stemma QT \/ Qwiic connection. Provides 3V, GND, IO4 (SDA), and IO5 (SCL). Also connected to the HDMI sink (monitor) with level shifting, so the EDID can be read.\u003c\/li\u003e\n\u003cli\u003eMini HDMI connector for DVI output to any HDMI display or monitor.\n\u003cul\u003e\n\u003cli\u003eGPIO6: D2+\u003c\/li\u003e\n\u003cli\u003eGPIO7: D2-\u003c\/li\u003e\n\u003cli\u003eGPIO8: D1+\u003c\/li\u003e\n\u003cli\u003eGPIO9: D1-GPIO10: D0+\u003c\/li\u003e\n\u003cli\u003eGPIO11: D0-\u003c\/li\u003e\n\u003cli\u003eGPIO12: Clock +\u003c\/li\u003e\n\u003cli\u003eGPIO13: Clock -\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePin breakout for HDMI extras: Utility, CEC, and HotPlug pins\u003c\/li\u003e\n\u003cli\u003eReset button - Press to restart your program\u003c\/li\u003e\n\u003cli\u003eSlide switch - On GPIO #3 for whatever purpose you wish.\u003c\/li\u003e\n\u003cli\u003eMany pads on the 'Bell has a duplicate hole pad next to it for solder-jumpering\u003c\/li\u003e\n\u003cli\u003eThe ground pads have white silkscreen rectangles to easily identify\u003c\/li\u003e\n\u003cli\u003eGold-plated pads for easy soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn Arduino, which is what we recommend, we use our fork of PicoDVI to create an internal framebuffer of 320x240 or 400x240 16-bit pixels that is then continuously blitted out as pixel-doubled 640x480 or 800x480 digital video. Whatever you 'draw' to the internal memory framebuffer appears instantly on the digital display in crisp colour. Since the library is a subclass of AdafruitGFX, it'll be familiar to folks who have used our TFT or OLED displays before.\u003c\/p\u003e\n\u003cp\u003eThere's also DVI output support in CircuitPython as of 8.1.0b2 - but note that it uses a lot of memory so in particular if you want to use PicoW with WiFi support, you'll likely only be able to get away with a monochrome display.\u003c\/p\u003e\n\u003cp\u003eNote that the DVI video generation uses one full core, both PIOs and 150K (320x240) or 190K (400x240) of SRAM. It's kinda maxed out so be aware of the remaining resource limitations.\u003c\/p\u003e\n\u003cp\u003eWe also connected the HDMI-connectors I2C pins to the SDA\/SCL of the Pico (through a safe level shifter) so you can read the EDID EEPROM of displays, and have broken out the CEC and Utility pads. The Hot Plug Detect pin is also available. Read this pin to know when a display has been connected!\u003c\/p\u003e\n\u003cp\u003eEach order comes with an assembled PCB and header. You will need to solder in the header yourself, but it's a quick task.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note!\u003c\/strong\u003e There are a lot of possible configurations, and we stock various headers depending on how you want to solder and attach them. Especially if you want the Pico on top so that the BOOTSEL button and LED are accessible.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUse the Pico Stacking Headers if you want to be able to plug into a breadboard or other accessory with sockets.\u003c\/li\u003e\n\u003cli\u003eUse the Pico Socket Headers if you want to plug directly in and have a nice solid connection that doesn't have any poking-out bits.\u003c\/li\u003e\n\u003cli\u003eUse the Short Socket Headers for a very slim but pluggable design; note that you'll want to trim down the Pico's headers or use the short plug headers on the Pico to have a skinny sandwich.\u003c\/li\u003e\n\u003cli\u003eSolder the PCB directly to the Pico headers - of course, this is very compact and inexpensive, but you won't be able to remove the PiCowbell.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 52.5mm x 20.2mm x 4.9mm\u003c\/li\u003e\n\u003cli\u003eProduct Weight: 4.3g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643787673661,"sku":"utj1789695347314","price":5.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/adafruit-picowbell-dvi-output-for-pico_1.jpg?v=1789695351"},{"product_id":"picorelay8-for-raspberry-pi-pico","title":"PicoRelay8 for Raspberry Pi Pico","description":"\u003cp\u003eThe PicoRelay8 allows eight 28V DC\/10A Normally Open relays to be controlled using a Raspberry Pi Pico.\u003c\/p\u003e \u003cp\u003eEach relay is controlled by a Pico GPIO pin - setting the pin high will close the relay's contacts allowing you to turn on the device and setting the GPIO pin low will open the contacts turning it off.\u003c\/p\u003e \u003cp\u003eWhen all 8 relays are energised the PicoRelay8 will use just under 500mA so please ensure the power supply\/computer is capable of supplying 500mA or ensure all relays are not energised together.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eIMPORTANT: The PicoRelay8 MUST NOT be used to switch mains voltages\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x PicoRelay8 board\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eRaspberry Pi Pico Pinout\u003c\/li\u003e \u003c\/ul\u003e \u003ch3\u003ePinout\u003c\/h3\u003e \u003ctable width=\"153\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd width=\"65\"\u003e\u003cstrong\u003eRelay\u003c\/strong\u003e\u003c\/td\u003e \u003ctd width=\"88\"\u003e\u003cstrong\u003ePico GPIO\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eA\u003c\/td\u003e \u003ctd\u003eGP13\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eB\u003c\/td\u003e \u003ctd\u003eGP10\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eC\u003c\/td\u003e \u003ctd\u003eGP5\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eD\u003c\/td\u003e \u003ctd\u003eGP2\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eE\u003c\/td\u003e \u003ctd\u003eGP3\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eF\u003c\/td\u003e \u003ctd\u003eGP4\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eG\u003c\/td\u003e \u003ctd\u003eGP11\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eH\u003c\/td\u003e \u003ctd\u003eGP12\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":43643788984381,"sku":"gew1789695410148","price":17.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/picorelay8-for-raspberry-pi-pico_1.jpg?v=1789695416"},{"product_id":"picam-module-for-raspberry-pi-compute-module-4-cm4","title":"PiCam Module for Raspberry Pi Compute Module 4 (CM4)","description":"\u003cp\u003eThe \u003cstrong\u003ePiCam Module\u003c\/strong\u003e is the mechanical solution to connect a Raspberry Pi camera module to a Raspberry Pi Compute Module 4 board. Great for making simple camera\/vision projects with your CM4.\u003c\/p\u003e \u003cp\u003eThe Raspberry Pi Compute Module 4 \u003cstrong\u003e(not included)\u003c\/strong\u003e can be plugged into the bottom of the PiCam module. The camera \u003cstrong\u003e(also not included)\u003c\/strong\u003e is connected to the PiCam module via FFC\/FPC ribbon cable. If needed, the camera module can also be mounted directly on the PiCam module, which achieves maximum compactness!\u003c\/p\u003e \u003cp\u003eThe existing mounting holes cover a variety of 'standard' 15-pin Raspberry camera modules. Mounting hardware is not included. In addition, the PiCam module can also be used for programming the Raspberry Pi Compute Module 4.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eImportant - Please ensure that the ribbon cable is fitted with the correct polarity \u003c\/strong\u003eor you run the risk of damaging your entire setup - CM4, camera module and even the PiCam board!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eCM4 and Camera Module not included\u003c\/strong\u003e\u003c\/p\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eCamera adapter board for CM4\u003c\/li\u003e \u003cli\u003eUSB-Interface for service (micro-USB)\u003c\/li\u003e \u003cli\u003eUSB-Interface for power (micro-USB)\u003c\/li\u003e \u003cli\u003e100-pin connector for connection to the CM4 module\u003c\/li\u003e \u003cli\u003e15-pin camera connector\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eQuick start guide\u003c\/li\u003e \u003cli\u003eManual\u003c\/li\u003e \u003cli\u003eForum\u003c\/li\u003e \u003cli\u003eSoftware: \u003cul\u003e \u003cli\u003eInstall Manual\u003c\/li\u003e \u003cli\u003e\u003cspan\u003erpiboot_setup.exe (file link)\u003c\/span\u003e\u003c\/li\u003e \u003cli\u003e\u003cspan\u003epicam_module210222.img (file link - 2,4Gb)\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003e\u003cspan\u003e3D STEP file\u003c\/span\u003e\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x PiCam Module\u003c\/li\u003e \u003c\/ul\u003e \u003cdiv id=\"tab-technical-details-content\" class=\"panel-collapse collapse in\"\u003e \u003cul id=\"product-files\"\u003e\u003c\/ul\u003e \u003cstrong\u003eCM4 and Camera Module not included\u003c\/strong\u003e\n\u003c\/div\u003e","brand":"Taskit","offers":[{"title":"Default Title","offer_id":43643789017149,"sku":"ilq1789695421143","price":34.73,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/picam-module-for-raspberry-pi-compute-module-4-cm4_1.jpg?v=1789695430"},{"product_id":"binocular-camera-base-board-for-cm4-with-interface-expander","title":"Binocular Camera Base Board for CM4 with Interface Expander","description":"\u003cp\u003eThis binocular base board for the Raspberry Pi Compute Module 4 is perfect for evaluating the CM4 for stereo vision, depth vision, AI applications, robotics and more, with the onboard dual IMX219 8MP cameras with up to 3280x2464 resolution per camera.\u003c\/p\u003e\n\u003cp\u003eThe main base board includes a slot for your CM4 board and also offers a number of handy features such as a MicroSD slot, full-size HDMI slot (4K 30FPS), Gigabit Ethernet, USB-C (power\/programming), USB 2.0 port and additional interface FFC connectors for the included Interface Expander board.\u003c\/p\u003e\n\u003cp\u003eThe included Interface Expander adds to this by giving the user another USB 2.0 port, another HDMI port, a 40-pin GPIO connector, M.2 M-Key slot for NVMe SSDs and more.\u003c\/p\u003e\n\u003cp\u003eWith the base and expander assembled together, there's still room for this CM4 heatsink to keep temperatures in check.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCM4 not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eCamera Base Onboard Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-binocular-cm4-camera-base-features-1_1.jpg?v=1688752992\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eInterface Expander Onboard Features\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-binocular-cm4-camera-base-features-2_1.jpg?v=1688752992\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eWhat's Onboard\u003c\/h2\u003e\n\u003ch3\u003eDual Camera Base\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-binocular-cm4-camera-base-features-3_1.jpg?v=1688752992\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eCM4 socket\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for all variants of Compute Module 4\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI connector\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 4K 30fps output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 port\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor connecting sorts of USB devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePWR \u0026amp; USB\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eUSB-C connector, 5V DC power supply or USB programming port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBOOT selection\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eON: CM4 will be booted from USB-C interface\u003c\/li\u003e\n\u003cli\u003eOFF: CM4 will be booted from eMMC or Micro SD card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCM4 status indicator\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePWR: Raspberry Pi power indicator\u003c\/li\u003e\n\u003cli\u003eACT: Raspberry Pi operating status indicator\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRJ45 Gigabit Ethernet\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e10\/100\/1000M compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMicro SD card slot\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor connecting a Micro SD card with a pre-burnt image (Lite variant ONLY)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO FFC connector\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor expanding 40PIN GPIO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI \u0026amp; PCIe \u0026amp; USB FFC connector\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor expanding HDMI1, PCIe, USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual cameras\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eIMX219, 8MP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eInterface Expander\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/waveshare-binocular-cm4-camera-base-features-4_1.jpg?v=1688752992\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB 2.0 port\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor connecting USB devices\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI1 connector\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSupports 4K 30fps output\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI \u0026amp; PCIe \u0026amp; USB FFC connector\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor expanding HDMI1, PCIe, USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGPIO FFC connector\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor expanding 40PIN GPIO\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e40-pin GPIO header\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 M KEY\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eFor NVME SSD, or communication module with PCIE M.2 M KEY interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 indicator\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eIndicating the operating status of the interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ch3\u003eDual Camera Base\u003c\/h3\u003e\n\u003ctable style=\"height: 342px;\" width=\"457\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003eCM4 socket\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eFor all variants of CM4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003eNetworking\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eGigabit Ethernet RJ45\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eUSB 2.0 x1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 36px; width: 115px;\" rowspan=\"2\"\u003e\u003cstrong\u003eFFC connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eHDMI \u0026amp; PCIe \u0026amp; USB FFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eGPIO FFC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 180px; width: 115px;\" rowspan=\"9\"\u003e\u003cstrong\u003eDual camera\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003epixels\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003e8MP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003esensor\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003eIMX219\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003eresolution\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003e3280 × 2464 (per channel)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003eCMOS size\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003e1\/4\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003eaperture\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003eF2.4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003efocal length\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003e2.6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 36px;\"\u003e\n\u003ctd style=\"height: 36px; width: 115px;\"\u003eFOV\u003c\/td\u003e\n\u003ctd style=\"height: 36px; width: 213px;\"\u003e83\/73\/50 degree\u003cbr\u003e(diagonal\/horizontal\/vertical)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003edistortion\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003e\u0026lt; 1%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003ebaseline length\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 213px;\"\u003e60mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eHDMI × 1, 4K 30FPS output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003eMicroSD socket for CM4 Lite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003ePower input\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003e5V\/2.5A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 115px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 332px;\" colspan=\"2\"\u003e85.0 × 51.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eInterface Expander\u003c\/h3\u003e\n\u003ctable style=\"height: 144px;\" width=\"456\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.516px;\"\u003e\u003cstrong\u003eUSB\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 300.484px;\"\u003eUSB 2.0 x3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 36px; width: 145.516px;\" rowspan=\"2\"\u003e\u003cstrong\u003eFFC connector\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 300.484px;\"\u003eHDMI \u0026amp; PCIe \u0026amp; USB FFC connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 300.484px;\"\u003eGPIO FFC connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 36px;\"\u003e\n\u003ctd style=\"height: 54px; width: 145.516px;\" rowspan=\"2\"\u003e\u003cstrong\u003eOther connectors\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 36px; width: 300.484px;\"\u003eM.2 M KEY × 1\u003cbr\u003efor  NVME SSD or communication module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 300.484px;\"\u003eRaspberry Pi 40-pin GPIO header\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.516px;\"\u003e\u003cstrong\u003eVideo\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 300.484px;\"\u003eHDMI × 1, supports 4K 30fps output\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 145.516px;\"\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 300.484px;\"\u003e85.0 × 51.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eBase Board Schematic\u003c\/li\u003e\n\u003cli\u003eInterface Expander Schematic\u003c\/li\u003e\n\u003cli\u003e3D Drawing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Dual camera base\u003c\/li\u003e\n\u003cli\u003e1x Interface expander\u003c\/li\u003e\n\u003cli\u003e1x Screws pack\u003c\/li\u003e\n\u003cli\u003e2x FFC cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCM4, heatsinks and other parts not listed are not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"Waveshare","offers":[{"title":"Default Title","offer_id":43643804483645,"sku":"pmc1789696028647","price":58.08,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/binocular-camera-base-board-for-cm4-with-interface-expander_1.jpg?v=1789696033"},{"product_id":"kitronik-mini-controller-for-raspberry-pi-pico","title":"Kitronik Mini Controller for Raspberry Pi Pico","description":"\u003cp\u003eThe Kitronik Mini Controller for Pico is a programmable controller for the Raspberry Pi Pico. It features a buzzer for audio feedback and 6 input buttons. It also breaks out; GP1, 2, 3, 4, 14, and 17, along with ADC1 and ADC2, and several 3.3V and GND pads, all on 0.1\"\/2.54mm pitch. The buttons are arranged in a typical Gamepad layout, with 4 directional buttons and two action buttons.\u003c\/p\u003e\n\u003cp\u003eThe controller has been designed to act as a remote control for the Kitronik Autonomous Robotics Platform (Buggy) for Pico but it can also be used for any Pico project\/game that requires user input\/control. This board does not include any type of screen, this helps to keep down the physical size, the cost and makes it an ideal solution for controlling robots \u0026amp; buggies where a screen is not needed. If your project requires some visual feedback then the ZIP96 Retro Gamer for Pico may be a more suitable option.\u003c\/p\u003e\n\u003cp\u003eTo Use the Mini Controller the Pico needs to have soldered pin headers attached and be firmly inserted into the connector. The correct orientation for inserting the Pico is marked on the PCB. A Raspberry Pi Pico W - Wireless with pre-soldered headers is available here.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The Pico pins will stick through the board slightly as the pin sockets are low-profile. Power is provided via the built-in AA battery holder on the underside of the board which accommodates 3 x AA batteries. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Pico and the AA batteries are NOT included\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eKitronik has developed a micro-python module and sample code to support the use of the Mini Controller for Pico. This code is available in the\u003cspan\u003e \u003c\/span\u003eGitHub repo\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eA programmable controller for the Raspberry Pi Pico.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eFor use with the Raspberry Pi Pico W - Wireless with pre-soldered headers.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt can be used as a remote control for the Kitronik Autonomous Robotics Platform (Buggy) for Pico.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAlso ideal for any Pico project\/game that requires user input\/control.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eThis controller does not feature a screen, this keeps down the size, and cost, making it ideal for controlling buggies\/robots, where a screen is not really needed.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt features a buzzer for audio feedback, and 6 input buttons (4 direction buttons and 2 x action buttons).\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eIt also breaks out; GP1, 2, 3, 4, 14, and 17, along with ADC1 and ADC2, and several 3.3V and GND pads, all on 0.1\"\/2.54mm pitch.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eKitronik has developed a micro-python module and sample code to support the use of the Mini Controller for Pico. This code is available here.\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eLength: 82.4mm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eWidth: 60mm.\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHeight: 28.5mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eSupply Voltage: 3xAA (4.5V typical) or USB via Pico\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMax Current (excluding Pico \u0026amp; buzzer) - 4mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTypical current in use (Normal use – Pico but buzzer off) - 25mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTypical current with Pico present \u0026amp; buzzer driven: 80mA\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTypical battery life (Pico powered, buzzer off) - 60 hours\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNumber of Pin Breakouts: 8 (6 x Digital GPIO, 2 x ADC, several 3.3V \u0026amp; GND)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eNumber of Buttons: 6\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eDatasheet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eGitHub Repo\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003ePackage Contents\u003c\/span\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e1 x Mini Controller for Raspberry Pi Pico\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":43643806253117,"sku":"jlb1789696083516","price":11.29,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/kitronik-mini-controller-for-raspberry-pi-pico_1.jpg?v=1789696088"},{"product_id":"pico-air-monitoring-expansion","title":"Pico Air Monitoring Expansion","description":"\u003cp\u003eThe Air Monitoring Expansion for Raspberry Pi Pico is an open-source, portable sensor that measures suspended particulate quantity by mass. It operates at 5V and features a digital laser dust sensor (PMSA003) and a built-in 0.91\" OLED display providing information on air particulate matter (PM1.0, PM2.5, PM10) via digital output. Communication is done through UART (serial), and it offers external GPIO Breakout Pins for connecting sensors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi Pico is \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePMSA003 Sensor\u003c\/li\u003e\n\u003cli\u003eStandard 40 Pins GPIO\u003c\/li\u003e\n\u003cli\u003eOnboard OLED display 0.91”\u003c\/li\u003e\n\u003cli\u003eMeasure accurately PM1.0, PM2.5, PM10 levels\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"490\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"216\"\u003eSensor Model\u003c\/td\u003e\n\u003ctd width=\"274\"\u003ePMSA003\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCommunication Interface\u003c\/td\u003e\n\u003ctd\u003eUART (Serial)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDisplay Type\u003c\/td\u003e\n\u003ctd\u003e0.91\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eBiosensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBoard Dimension\u003c\/td\u003e\n\u003ctd\u003e92 x 68mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMeasuring Range\u003c\/td\u003e\n\u003ctd\u003e0.3 to 1.0; 1.0 to 2.5; 2.5 to 10 Micron (µm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCounting Efficiency\u003c\/td\u003e\n\u003ctd\u003e50% @ 0.3 µm 98% @\u0026gt; = 0.5 µm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eResponse Time\u003c\/td\u003e\n\u003ctd\u003e≤10 sec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC Supply Voltage\u003c\/td\u003e\n\u003ctd\u003e5.0V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-10 to +60 Celsius\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eGithub\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Pico_Air_Monitoring_Expansion_features_1.jpg?v=1704968354\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Pico Air Monitoring Expansion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SBC","offers":[{"title":"Default Title","offer_id":43643810185277,"sku":"xhb1789696306186","price":24.2,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pico-air-monitoring-expansion_1.jpg?v=1789696312"},{"product_id":"nvme-base-for-raspberry-pi-5","title":"NVMe Base for Raspberry Pi 5","description":"\u003cp\u003eAdd super-fast storage to your Raspberry Pi 5 allowing for lightning-fast boots, NAS use, and snappy applications!\u003c\/p\u003e\n\u003cp\u003eNVMe Base is a PCIe extension board for Raspberry Pi 5. Simply populate it with an M-key NVMe SSD (2230 to 2280 sizes supported) and mount it under your Pi for a compact and fast storage solution - It even comes with rubber feet!\u003c\/p\u003e\n\u003cp\u003eIt's the perfect solution for turning your Raspberry Pi 5 into a file server, media centre, reverse proxy, etc. - any task that benefits from large amounts of fast storage, especially with random high operations per second (IOPS) workloads. In short, it's a game-changer!\u003c\/p\u003e\n\u003cp\u003eNVMe base follows the new \"PIP\" design guidelines provided by Raspberry Pi ensuring that it will be easy to use and be supported long term by updates to Raspberry Pi OS - though it is very early days and things are improving rapidly there!\u003c\/p\u003e\n\u003cp\u003eWe also stock the NVMe Base \u003cstrong\u003eDuo\u003c\/strong\u003e from Pimoroni! Plus we stock replacement 35mm and alternative 50mm PCIe cables to give you a variety of options for connecting and placing your NVMe Base.\u003c\/p\u003e\n\u003ch3\u003eRaspberry Pi Firmware\u003c\/h3\u003e\n\u003cp\u003eFor the most hassle-free experience, make sure your Raspberry Pi OS is up to date, and your RPi 5 firmware is updated to 2023-12-06 (Dec 6th) or newer. This supports all the features of the RPi PCIe spec and means you don't have to mess with config files to get started.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eBase Kit\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNVMe Base PCB with M.2 Slot (M-Key)\u003c\/li\u003e\n\u003cli\u003e'PCIe Pipe' Flat Flex Cable (35mm)\u003c\/li\u003e\n\u003cli\u003e4x Rubber feet\u003c\/li\u003e\n\u003cli\u003eM2 bolt and 2x nuts for SSD mounting\u003c\/li\u003e\n\u003cli\u003e4x 7mm M2.5 standoffs for base mounting\u003c\/li\u003e\n\u003cli\u003e8x short M2.5 bolts for base mounting\u003c\/li\u003e\n\u003cli\u003e4x long M2.5 bolts for 'pass-thru' mounting with a HAT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eActive Cooler, Raspberry Pi and NVME SSD not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eDrive Compatibility\u003c\/h2\u003e\n\u003cp\u003ePimoroni have tested NVMe Base with the following M.2 NVMe drives successfully. They have usually tested one drive from one batch, so this is not comprehensive, or an 'Approved' list, but it's a good guide for drives to seek out:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi SSD\u003c\/li\u003e\n\u003cli\u003ePinedrive 256GB NVMe SSD (2242)\u003c\/li\u003e\n\u003cli\u003ePinedrive 256GB NVMe SSD (2280)\u003c\/li\u003e\n\u003cli\u003eAData Legend 700\u003c\/li\u003e\n\u003cli\u003eAData Legend 800\u003c\/li\u003e\n\u003cli\u003eAData XPG SX8200 Pro\u003c\/li\u003e\n\u003cli\u003eAxe Memory Generic Drive\u003c\/li\u003e\n\u003cli\u003eCrucial P2 M.2\u003c\/li\u003e\n\u003cli\u003eCrucial P3 M.2\u003c\/li\u003e\n\u003cli\u003eCrucial P3 Plus M.2\u003c\/li\u003e\n\u003cli\u003eFanxiang S501Q 512GB \u003cem\u003e(reported working well via Pi 5 PCIe by a customer - thanks Graeme)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eInland PCIe NVMe SSD\u003c\/li\u003e\n\u003cli\u003eKingston KC3000\u003c\/li\u003e\n\u003cli\u003eKioxia Exceria NVMe SSD\u003c\/li\u003e\n\u003cli\u003eKioxia Exceria G2 NVMe SSD\u003c\/li\u003e\n\u003cli\u003eLexar NM620\u003c\/li\u003e\n\u003cli\u003eLexar NM710\u003c\/li\u003e\n\u003cli\u003eNetac NV2000 NVMe SSD\u003c\/li\u003e\n\u003cli\u003eNetac NV3000 NVMe SSD\u003c\/li\u003e\n\u003cli\u003eOrigin Inception TLC830 Pro NVMe\u003c\/li\u003e\n\u003cli\u003ePNY CS1030 \u003cem\u003e(a customer reported issues using this stick with an Argon NVMe expansion, so perhaps not an ideal choice)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eSabrent Rocket 4.0\u003c\/li\u003e\n\u003cli\u003eSabrent Rocket Nano\u003c\/li\u003e\n\u003cli\u003eSamsung 980\u003c\/li\u003e\n\u003cli\u003eSamsung 980 Pro (500GB\/1TB)\u003c\/li\u003e\n\u003cli\u003eTeam MP33\u003c\/li\u003e\n\u003cli\u003eWestern Digital Black SN750\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSE \u003c\/strong\u003e(Phison Controller\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e'Maybe' List. Works with quirks\/not ideal.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThese drives either needed extra power, were a bit quirky when Pimoroni tested them or they've had reports of them being problematic. It may just be the drive they had, but they're probably best avoided.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKioxia BG4 2230. Performance very patchy. Runs at quite a high temp.\u003c\/li\u003e\n\u003cli\u003ePatriot P300 - These drives have various controllers, some of which seem to be incompatible at this time.\u003c\/li\u003e\n\u003cli\u003ePatriot P310 - These drives have various controllers, some of which seem to be incompatible at this time.\u003c\/li\u003e\n\u003cli\u003ePNY CS1030 (250GB). Reports of this size not working.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSamsung 970 EVO Plus. Runs at a higher temp. Some user reports of problems under heavy load or not showing up on boot.\u003c\/li\u003e\n\u003cli\u003eSamsung 980 Pro (250GB). Reports of this size not working.\u003c\/li\u003e\n\u003cli\u003eWD Blue SN550. Our fresh unit could be used as storage but could not be booted from.\u003c\/li\u003e\n\u003cli\u003eWD Red SN700. Slow to boot first time, but worked and booted OK.\u003c\/li\u003e\n\u003cli\u003eWD SN740. Our fresh unit worked well. YMMV.\u003c\/li\u003e\n\u003cli\u003eWD Black SN770. Our fresh unit worked fine. YMMV.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e'Avoid' List. Pimoroni had problems or reports of problems.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eKingSpec NX Series\u003c\/li\u003e\n\u003cli\u003eKingston OM8SEP4256Q-A0\u003c\/li\u003e\n\u003cli\u003eTranscend 110Q (TS500GMTE110Q)\u003c\/li\u003e\n\u003cli\u003eWD Green\/Blue\/Red\/Black not in the above list. Variable results or not working because of quirks of a SanDisk controller\/firmware. Our SN350 and SN570 prevented the RPi 5 from booting at all especially.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOtherwise most M.2 NVMe drive (Not SATA!) you have lying around should work fine. Check out their benchmark results over at pibenchmarks.net!\u003c\/p\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVideo: Installing the Pimoroni NVMe Base on Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eLearn: Getting Started with NVMe Base for Raspberry Pi 5 \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFirmware\u003c\/h3\u003e\n\u003cp\u003eFor the most hassle-free experience, make sure your Raspberry Pi OS is up to date, and your RPi 5 firmware is updated to 2023-12-06 (Dec 6th) or newer. This supports all the features of the RPi PCIe spec and means you don't have to mess with config files to get started.\u003c\/p\u003e\n\u003cp\u003eSoftware update on the RPi OS should do this for you, but to force it you can:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eopen a Terminal (Ctrl-Alt-T)\u003c\/li\u003e\n\u003cli\u003erun\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ccode\u003esudo raspi-config\u003c\/code\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand choose '\u003cstrong\u003eLatest\u003c\/strong\u003e' under\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdvanced Options \u0026gt; Bootloader Version\u003c\/strong\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRunning\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ccode\u003esudo rpi-eeprom-update\u003c\/code\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the Terminal will tell you which version of firmware is running.\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003ePCIe 3 Mode\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eTo enable experimental and not-officially-supported PCIe 3 mode, add the follow line to the \u003cstrong\u003e\u003ccode\u003e[all]\u003c\/code\u003e\u003c\/strong\u003e section at the end of your Raspberry Pi \u003cstrong\u003e\u003ccode\u003e\/boot\/config.txt\u003c\/code\u003e\u003c\/strong\u003e file like this:\u003c\/span\u003e\u003c\/p\u003e\n\u003cpre style=\"padding-left: 30px;\"\u003e\u003cstrong\u003e\u003ccode\u003e[all]\ndtparam=pciex1_gen=3\u003c\/code\u003e\u003c\/strong\u003e\u003c\/pre\u003e\n\u003cp\u003eSave and reboot - your drive is ready to use!\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eFormatting the NVMe and booting from NVMe\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eIf you want to boot from the NVMe drive, follow these extra steps:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eMake sure your firmware is updated as above\u003c\/li\u003e\n\u003cli\u003eFormat the drive using Raspberry Pi Imager\n\u003c\/li\u003e\n\u003cli\u003eYou can do this with your NVMe Base installed by booting the RPi 5 from the SD card and running Raspberry Pi Imager from the start menu.\u003c\/li\u003e\n\u003cli\u003eOpen a Terminal.\u003c\/li\u003e\n\u003cli\u003eRun \u003cstrong\u003e\u003ccode\u003esudo raspi-config\u003c\/code\u003e\u003c\/strong\u003e \u003c\/li\u003e\n\u003cli\u003eChoose NVMe boot from the 'Advanced' section.\u003c\/li\u003e\n\u003cli\u003eReboot your RPi 5.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAlways power off your RPi and disconnect the power supply before installing or uninstalling the NVMe Base.\u003c\/li\u003e\n\u003cli\u003eNVMe Base offers a general-purpose PCIe x1 connection - while we know most people want to add fast storage in theory you can use other devices with it, we just can't help you make them work! :-D What Would Jeff (Geerling) do?\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensional drawing\u003c\/li\u003e\n\u003cli\u003e3D model (PNG\u003cspan\u003e \u003c\/span\u003e\/\u003cspan\u003e \u003c\/span\u003eSTEP)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":43643811987517,"sku":"ozb1789696430568","price":13.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/nvme-base-for-raspberry-pi-5_1.jpg?v=1789696436"},{"product_id":"clusterctrl-a6","title":"ClusterCTRL A+6","description":"\u003cp\u003e\u003cstrong\u003eNetwork six Raspberry Pi 3A+ using USB Gadgets!\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eThe Cluster A+6 is a side step from the original Cluster HAT and switches Raspberry Pi Zeros out for the more powerful quad-core Raspberry Pi 3A+ (which can also be used with the older A+ model).\u003c\/p\u003e \u003cp\u003eThis is an updated version where the Tantalum capacitors have been switched for Aluminium and the vertical USB connectors have been switched for more robust versions.\u003c\/p\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eController Pi A+\/3A+ and 5 A+\/3A+ nodes\u003c\/li\u003e \u003cli\u003eUSB Gadget Mode: Ethernet and Serial Console\u003c\/li\u003e \u003cli\u003eTwo onboard 4 port USB 2.0 hubs (USB port to the controller is available for use with USB Ethernet\/Mass storage\/etc)\u003c\/li\u003e \u003cli\u003e\n\u003cstrong\u003eNew!\u003c\/strong\u003e ClusterCTRL (I2C) USB interface allows individual control of Pi power, fans, LED etc\u003c\/li\u003e \u003cli\u003eProgrammable power-on states for LED, Individual Pi Power etc\u003c\/li\u003e \u003cli\u003eUnpopulated pads for ClusterCTRL UART status (for debug) and fans on the bottom of the PCB\u003c\/li\u003e \u003cli\u003eController Pi can be rebooted without interrupting power to the nodes (network recovers on boot)\u003c\/li\u003e \u003cli\u003eWorks with the standard Cluster HAT software or you can roll your own\u003c\/li\u003e \u003cli\u003ePower for the Raspberry Pi is provided in two banks (powering 3 Pi each)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eThe ClusterCTRL controller uses our open-source software (building on i2c_tiny_usb which uses V-USB) running on a Microchip ATMEGA328P to provide a standard I2C interface for controlling the cluster from the controller Pi.\u003c\/p\u003e \u003ch2\u003eOther Parts Required\u003c\/h2\u003e \u003cp\u003eThe following are required but not provided:\u003c\/p\u003e \u003cul\u003e \u003cli\u003eTwo 5V 3\/4 Amp Power supplies (2.1 or 2.5 mm barrel jack connector with positive tip) - One for Controller\/P1\/P2 and a second to power P3\/P4\/P5.\u003c\/li\u003e \u003cli\u003e1-6 Raspberry Pi A3+ or A+ (any mix).\u003c\/li\u003e \u003cli\u003e1-6 SD cards. It's possible to boot recent 3A+ over USB so an SD card (or Flash) is only required for the Controller but can be easier and quicker using individual SD cards.\u003c\/li\u003e \u003cli\u003e\n\u003cem\u003e(optional)\u003c\/em\u003e USB Network Adapter (may be useful for configuration) or you can use the CNAT image and WiFi on the controller.\u003c\/li\u003e \u003cli\u003e\n\u003cem\u003e(optional)\u003c\/em\u003e M2.5 5mm spacers\/standoffs to separate the Raspberry Pi A+\/3A+.\u003c\/li\u003e \u003cli\u003e\n\u003cem\u003e(optional)\u003c\/em\u003e Two 60mm fans (When using a 3D Printed Tray).\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x ClusterCTRL A+6 board\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eGitHub\u003c\/li\u003e \u003cli\u003eSoftware Setup\u003c\/li\u003e \u003c\/ul\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":43643812347965,"sku":"blr1789696478437","price":29.89,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/clusterctrl-a6_1.jpg?v=1789696484"},{"product_id":"pico-booster-breakout","title":"Pico Booster Breakout","description":"\u003cp\u003eMany add-on boards for the Raspberry Pi Pico only use a few GPIO pins but stop you from accessing the rest - this breakout board allows you to easily use the otherwise unused GPIO pins!\u003c\/p\u003e \u003cp\u003eBy using stacking headers, the Pico Booster Breakout allows you to use a Pico in a regular Pico add-on board whilst also providing easy access the to GPIO using standard jumper wires.\u003c\/p\u003e \u003cp\u003eThe PCB is fractionally smaller than 52mm x 21mm. The pins are a straight one-to-one so the board can be used any way round or used to break out other 0.1\" 2x20 pin boards with a 0.7\" spacing between rows.\u003c\/p\u003e \u003cp\u003eWhilst there are numerous breakout boards for the Pico they're normally standalone rather than being designed to be used with existing add-on boards.\u003c\/p\u003e \u003cp\u003eWe stock the assembled versions, either with male headers or female sockets \u003cstrong\u003e(select an option before adding to your cart)\u003c\/strong\u003e. No soldering required!\u003c\/p\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x Assembled Pico Booster Breakout \u003cstrong\u003e(male or female headers - select before adding to cart)\u003c\/strong\u003e\n\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"8086","offers":[{"title":"Male Headers","offer_id":43643812511805,"sku":"tuc1789696494328","price":5.46,"currency_code":"USD","in_stock":true},{"title":"Female Sockets","offer_id":43643812544573,"sku":"svs1789696494329","price":5.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pico-booster-breakout_1.jpg?v=1789696498"},{"product_id":"usb-power-switch-pro-kit-for-pico","title":"USB Power Switch Pro Kit for Pico","description":"\u003cp\u003eThis handy kit enables power to a USB device (Chromecast\/Raspberry Pi\/USB Fan\/USB light\/etc) to be turned on\/off by a Raspberry Pi Pico or Pico W!\u003c\/p\u003e\n\u003cp\u003eThe board can be used with either a Pico W for WiFi-enabled control or using a regular Pico when using sensors or button inputs. A great match for our squid button cables!\u003c\/p\u003e\n\u003cp\u003eExamples using CircuitPython are provided.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: Requires soldering of Pico\/PicoW (not supplied) and USB Type-A socket (supplied but unsoldered).\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eConnectors\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMicro USB* - Power input \/ USB Data connected to output USB Type-A Socket.\u003c\/li\u003e\n\u003cli\u003eMicro USB* (Pico) - Power input \/ USB Data connected to Pico.\u003c\/li\u003e\n\u003cli\u003e3-in 0.1\" pin header (GND\/GP13\/GP12).\u003c\/li\u003e\n\u003cli\u003e4-pin SH - I2C STEMMA QT\/Qwiic compatible (GND\/3v3\/GP26\/GP27).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e[*] The micro USB ports are intentionally back to back to prevent both being connected at the same time.\u003c\/p\u003e\n\u003ch2\u003eExample usage\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSimple push\/slide switch at the end of a (long) cable, using internal pull-up on the Pico\u003c\/li\u003e\n\u003cli\u003eInternal temperature sensor triggering a USB fan when reaching a temperature\u003c\/li\u003e\n\u003cli\u003eI2C CO2 sensor triggering a light\u003c\/li\u003e\n\u003cli\u003eWireless controlled Sleep function for Chromecast\/Monitor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can find example CircuitPython scripts on Github.\u003c\/p\u003e\n\u003ch2\u003ePins \u0026amp; power\u003c\/h2\u003e\n\u003cp\u003ePower for the output USB ports is controlled using GP2 (high=on), the other pins have been chosen to increase the usefulness of the board for those who may want to take advantage of the alternate functions.\u003c\/p\u003e\n\u003ctable width=\"450\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"87\"\u003e\u003cstrong\u003eGPxx\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"133\"\u003e\u003cstrong\u003ePort\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"230\"\u003e\u003cstrong\u003eFunctions\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP12\u003c\/td\u003e\n\u003ctd\u003e3-pin header\u003c\/td\u003e\n\u003ctd\u003eUART0 TX \/ I2C0 SDA \/ SPI1 RX\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP13\u003c\/td\u003e\n\u003ctd\u003e3-pin header\u003c\/td\u003e\n\u003ctd\u003eUART0 RX \/ I2C0 SCL \/ SPI1 CSn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP26\u003c\/td\u003e\n\u003ctd\u003e4-pin SH\u003c\/td\u003e\n\u003ctd\u003eA0 \/ SPI1 SCK \/ I2C1 SDA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGP27\u003c\/td\u003e\n\u003ctd\u003e4-pin SH\u003c\/td\u003e\n\u003ctd\u003eA1 \/ SPI1 TX \/ I2C1 SCL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003ePlease Note\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFOR USE ONLY WITH 5 VOLT\u003c\/strong\u003e supplies and devices - Using anything else may damage your power supply\/charger\/USB devices and the USB Power Switch Pro board.\u003c\/li\u003e\n\u003cli\u003eUSB data lines are connected at all times to either Pico or Output USB port depending on which micro USB port is used.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\nExamples (CircuitPython)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":43643812642877,"sku":"qoc1789696499470","price":3.23,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/usb-power-switch-pro-kit-for-pico_1.jpg?v=1789696504"},{"product_id":"picovision-pico-w-aboard","title":"PicoVision (Pico W Aboard)","description":"\u003cp\u003eUse PicoVision to make and run your own homebrew games, draw digital art, recreate beloved demos, screensavers or WinAmp visualisations, visualise data, subvert advertising billboards, emulate CeeFax or whip up some last-minute signage for your cyber night market.\u003c\/p\u003e\n\u003cp\u003eWe managed to cram a lot into this little thing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eGPU (RP2040)\u003cbr\u003eDoes all the heavy-lifting to display buttery-smooth, high-res, animations on your TV or monitor via HDMI.\u003c\/li\u003e\n\u003cli\u003eCPU (Pico W)\u003cbr\u003eRuns your code and provides an interface to other gadgets through USB, Wi-Fi, and Bluetooth!\u003c\/li\u003e\n\u003cli\u003eHDMI connector\u003cbr\u003eMake use of TVs, monitors, giant projectors, or even tiny displays for building into a cosplay outfit.\u003c\/li\u003e\n\u003cli\u003eLine out audio\u003cbr\u003eBash out some bleeps and bloops! This digital audio interface can produce some quality noise.\u003c\/li\u003e\n\u003cli\u003emicroSD card\u003cbr\u003eNever run out of space for your lovely assets by adding a sizeable microSD card to your setup.\u003c\/li\u003e\n\u003cli\u003eQw\/ST connector\u003cbr\u003eAdd sensors or other types of breakouts to your project so they can react to the world around them.\u003c\/li\u003e\n\u003cli\u003eOn-board reset and user buttons\u003cbr\u003eCreate a simple user interface for your project without needing to add any extras.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can program PicoVision using C++ or MicroPython. C++ will get you the best performance, but if you're a beginner we'd recommend MicroPython for ease of getting started.\u003c\/p\u003e\n\u003cp\u003eEither way, you'll have access to our in-house PicoGraphics libraries which will let you easily manipulate shapes, text and images, some exciting new vector graphics and font functionality courtesy of PicoVector, and the ability to make bleeps, bloops and other fun electronic noise with PicoSynth.\u003c\/p\u003e\n\u003ch2\u003eAccessory Kit\u003c\/h2\u003e\n\u003cp\u003eYou can buy a PicoVision on its own, or with a SD card and a selection of useful cables - add a\u003cspan\u003e \u003c\/span\u003eUSB keyboard, and it's all you'll need to run Doom! \u003cstrong\u003eMake sure you select which option you want before adding to the cart!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eKit Contents\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e50cm HDMI cable for plugging in a monitor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB-A to micro-B cable for programming\/power\u003c\/li\u003e\n\u003cli\u003eMicro-USB splitter cable for connecting a USB accessory while powering\u003c\/li\u003e\n\u003cli\u003e32GB microSD card\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Pico W Aboard (CPU)\n\u003cul\u003e\n\u003cli\u003eDual Arm Cortex M0+ with 264kB of SRAM\u003c\/li\u003e\n\u003cli\u003e2MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003e2.4GHz wireless \/ Bluetooth 5.2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRP2040 (GPU)\n\u003cul\u003e\n\u003cli\u003eAnother dual Arm Cortex M0+ with 264kB of SRAM\u003c\/li\u003e\n\u003cli\u003eHigher resolution modes use significant GPU overclocking*\u003c\/li\u003e\n\u003cli\u003eConnects to the CPU as an I2C peripheral device\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x 8MB PSRAM chips for frame double-buffering\u003c\/li\u003e\n\u003cli\u003eDigital Video out via HDMI connector\u003c\/li\u003e\n\u003cli\u003e\nPCM5100A DAC for line-level audio over I2S wired to a 3.5mm stereo jack\u003c\/li\u003e\n\u003cli\u003eMicroSD card slot\u003c\/li\u003e\n\u003cli\u003eThree user buttons (one wired to CPU, two to GPU)\u003c\/li\u003e\n\u003cli\u003eReset button **\u003c\/li\u003e\n\u003cli\u003eStatus LED (GPU)\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector\u003c\/li\u003e\n\u003cli\u003eFully-assembled (no soldering required)\u003c\/li\u003e\n\u003cli\u003eSpare\/extra pins broken out as unpopulated headers (these require soldering) ***\u003c\/li\u003e\n\u003cli\u003eC++\/MicroPython libraries\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow it Works\u003c\/h2\u003e\n\u003cp\u003ePicoVision uses two RP2040s - one on a Pico W as a \"CPU\" and one as a \"GPU\" - to produce high-resolution (for a microcontroller) DV output by swapping the contents of two physical PSRAM frame buffers back and forth between them.\u003c\/p\u003e\n\u003cp\u003eThe two PSRAMs act as a front and back buffer. The \"CPU\" (the Pico W) writes to one while the \"GPU\" (RP2040) reads from the other, applies some \"hardware\" effects and generates the DV signals.\u003c\/p\u003e\n\u003cp\u003eYou can find out more about the hardware here.\u003c\/p\u003e\n\u003cp\u003eThe ingenious firmware for PicoVision's GPU has been developed with the considerable help of long-time collaborator and software wizard Mike Bell.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDownload MicroPython for PicoVision\u003c\/li\u003e\n\u003cli\u003eMicroPython examples and documentation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSchematic\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout and Dimensions\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/PicoVision_feature_1.jpg?v=1709645028\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eClick here for a list of supported display resolutions and some caveats. Note that some higher resolution modes require significant overclocking of the CPU, so are not guaranteed to work on all PicoVisions.\u003c\/li\u003e\n\u003cli\u003e** By default, the reset button resets both the CPU and GPU. If, for some hackerly reason you want to make it just reset the CPU, there's a cuttable trace on the back of the board.\u003c\/li\u003e\n\u003cli\u003e*** We've broken out some spare pins as unpopulated headers along the bottom of the board. You can find the serial wire debug pins for both the GPU and CPU here, plus several unused\/extra GPIO (hey, why not use the spare pins on the GPU as an I\/O Expander!). As they're unpopulated, soldering is required to use these.\u003c\/li\u003e\n\u003cli\u003eOur software doesn't support audio output over HDMI, but if you're brave and want to attempt passing I2S audio data from the CPU (or the PSRAM buffers!) to the DV connector, the board is wired to support this.\u003c\/li\u003e\n\u003cli\u003eNote that PicoVision doesn't output SCART\/composite signals, so if you want to use it to play Doom on an old CRT TV or monitor you will need an additional HDMI to composite converter\/adaptor.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"PicoVision Only","offer_id":43643813462077,"sku":"zya1789696567934","price":36.26,"currency_code":"USD","in_stock":true},{"title":"With Accessory Kit","offer_id":43643813494845,"sku":"qef1789696567935","price":44.7,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/picovision-pico-w-aboard_1.jpg?v=1789696573"},{"product_id":"cm4-maker-board","title":"CM4 Maker Board","description":"\u003cp\u003eThis maker board for the Raspberry Pi CM4 supports a wide range of input voltages, has a USB-C port for power and data, and includes a MicroSD slot for the CM4 Lite.\u003c\/p\u003e\n\u003cp\u003eThe board allows for the integration of NVMe SSDs and other M.2 PCIe modules.\u003c\/p\u003e\n\u003cp\u003eIt offers four USB 2.0 ports, a full-size HDMI port supporting up to 4K resolution, and is compatible with Raspberry Pi HATs. It is also equipped with a real-time clock, making it suitable for applications without internet connectivity.\u003c\/p\u003e\n\u003cp\u003eAdditional features include 10 GPIO status LEDs, three user buttons, a piezo buzzer, five Grove ports, and a maker port supporting I2C for QWIIC and Stemma QT modules, enhancing its utility for a variety of projects.\u003c\/p\u003e\n\u003ch2\u003eWhat's on Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CM4_Maker_Board_for_Raspberry_Pi_CM4_1.jpg?v=1708700546\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e10x GPIO LED\u003c\/li\u003e\n\u003cli\u003e1x microSD Card Slot\u003c\/li\u003e\n\u003cli\u003e1x CSI Camera Port for Raspberry Pi Camera Modules\n\u003c\/li\u003e\n\u003cli\u003e1x DSI Display Port for Raspberry Pi Touch Display 2\n\u003c\/li\u003e\n\u003cli\u003e5x Grove Ports\n\u003cul\u003e\n\u003cli\u003e2x GPIO Ports (GPIO 5, 6 \u0026amp; 23, 24)\u003c\/li\u003e\n\u003cli\u003e1x PWM Port (GPIO 12, 13)\u003c\/li\u003e\n\u003cli\u003e1x UART Port (GPIO 14, 15)\u003c\/li\u003e\n\u003cli\u003e1x I2C Port (GPIO 2, 3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Maker Port (JST-SH 4-Ways Connector)\u003c\/li\u003e\n\u003cli\u003e3x User Buttons\u003c\/li\u003e\n\u003cli\u003e1x Analog Audio Out\u003c\/li\u003e\n\u003cli\u003e1x Piezo Buzzer\u003c\/li\u003e\n\u003cli\u003e1x Buzzer Mute Switch\u003c\/li\u003e\n\u003cli\u003e2x Power Buttons\u003c\/li\u003e\n\u003cli\u003e1x RTC Battery Holder\u003c\/li\u003e\n\u003cli\u003e1x PCF85063A RTC \u003cbr\u003e(Note: DSI \u0026amp; CSI are prohibited when using RTC)\u003c\/li\u003e\n\u003cli\u003e1x External Power Button Header\u003c\/li\u003e\n\u003cli\u003e1x Boot Switch\u003c\/li\u003e\n\u003cli\u003e1x M.2 Connector\u003c\/li\u003e\n\u003cli\u003e2x M.2 Mounting Hole\u003c\/li\u003e\n\u003cli\u003e1x USB-C\u003c\/li\u003e\n\u003cli\u003e1x HDMI\u003c\/li\u003e\n\u003cli\u003e4x USB 2.0 Host\u003c\/li\u003e\n\u003cli\u003e1x Gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003e1x CM4 Socket\u003c\/li\u003e\n\u003cli\u003eGPIOs Breakout\u003c\/li\u003e\n\u003cli\u003e1x DC Power Jack\u003c\/li\u003e\n\u003cli\u003e4x Status LEDs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eGetting Started Guide with CM4 Maker Board\u003c\/li\u003e\n\u003cli\u003eCM4 Maker Board Datasheet\u003c\/li\u003e\n\u003cli\u003eCM4 Maker Board CAD File\u003c\/li\u003e\n\u003cli\u003eCompute Module 4 Product Brief\u003c\/li\u003e\n\u003cli\u003eCompute Module 4 datasheet\u003c\/li\u003e\n\u003cli\u003eCompute Module 4 CAD file\u003c\/li\u003e\n\u003cli\u003eCompute Module 4 Lite (without eMMC) CAD file\u003c\/li\u003e\n\u003cli\u003e\nRaspberry Pi Getting Started by raspberrypi.org\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePinout\u003c\/h3\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/CM4_Maker_Board_for_Raspberry_Pi_CM4_features_2.jpg?v=1708702018\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x CM4 Maker Board\u003c\/li\u003e\n\u003cli\u003e4x Silicone Bumper\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cytron","offers":[{"title":"Default Title","offer_id":43643813593149,"sku":"tzg1789696575290","price":56.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/cm4-maker-board_1.jpg?v=1789696579"},{"product_id":"picouart6","title":"PicoUART6","description":"\u003cp\u003eThe PicoUART6 from 8086 provides the hardware side of a \u003cstrong\u003e6-port UART to USB (CDC) and I2C bridge\u003c\/strong\u003e to access multiple Raspberry Pi 5 console UART.\u003c\/p\u003e\n\u003cp\u003eIt can also be used with other 3.3V boards either following the UART Raspberry Pi 3-pin Debug Connector Specification or using a cable with a 3-pin JST SH compatible connector to 0.1\" header for example. The mounting holes and cutouts in the PicoUART6 PCB \u003cstrong\u003eallow it to be mounted onto a Raspberry Pi\u003c\/strong\u003e using M2.5 standoffs.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAn SWD debug port (for debugging the onboard Pico) and STEMMA QT\/Qwiic compatible connector for I2C (uses i2c-tiny-usb driver available on Linux) are also provided.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePico and cables not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eUsing the PicoUART6\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eTo use the PicoUART6 you'll first need to solder a Raspberry Pi Pico (\u003cstrong\u003enot included\u003c\/strong\u003e) onto the PicoUART6 or solder two 20-way 0.1\" header sockets to the PicoUART6 and then use a Raspberry Pi Pico H with pre-populated headers.\u003c\/p\u003e\n\u003cp\u003eUSB and UART Cables are \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003ch3\u003eFirmware\u003c\/h3\u003e\n\u003cp\u003eTo upload the\u003cspan\u003e \u003c\/span\u003e\u003cem\u003epico-sexa-uart-bridge\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003efirmware to the Raspberry Pi Pico.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePress and hold the BOOT button whilst plugging a USB cable from the Pico into your computer, then release the BOOT button.\u003c\/li\u003e\n\u003cli\u003eAfter a few seconds an RPI-RP2 drive should appear.\u003c\/li\u003e\n\u003cli\u003eSave the latest\u003cspan\u003e \u003c\/span\u003erelease .uf2\u003cspan\u003e \u003c\/span\u003efile onto the RPI-RP2 drive.\u003c\/li\u003e\n\u003cli\u003eThe RPI-RP2 drive will then disappear and when it connects back to the computer you should see 6 USB Serial ports.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSource Code\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x PicoUART6 board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePico and cables not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":43643816345661,"sku":"bub1789696905325","price":6.6,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/picouart6_1.jpg?v=1789696911"},{"product_id":"nvdac-for-raspberry-pi-5","title":"NVDAC for Raspberry Pi 5","description":"\u003cp\u003eThe 52Pi NVDAC stands for \u003cstrong\u003eNVMe \u0026amp; DAC\u003c\/strong\u003e. The DAC and PCIe to NVMe SSD HAT is a comprehensive board designed to augment the audio and storage capabilities of the Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eThis versatile add-on combines the acclaimed DAC+ Standard for \u003cstrong\u003ehigh-quality audio output\u003c\/strong\u003e and an \u003cstrong\u003eintegrated PCIe slot for accommodating NVMe 2230\/2242 SSDs\u003c\/strong\u003e (such as the Raspberry Pi SSD), providing users with an all-in-one solution to elevate their Raspberry Pi 5 projects. The board also \u003cstrong\u003eincludes an IR receiver\u003c\/strong\u003e (pin 22, GPIO 25).\u003c\/p\u003e\n\u003cp\u003eSome simple setup is required, using the existing HiFiBerry dtoverlay in Raspberry Pi OS. Please see the Wiki for assembly and setup instructions.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eNo 'official' compatibility list is maintained by 52Pi or Raspberry Pi (yet), so\u003cspan\u003e \u003c\/span\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDAC+ Standard\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eExceptional Audio Quality: The DAC+ Standard boasts high-quality audio performance, leveraging a top-tier digital-to-analog converter (DAC) for superior sound reproduction.\u003c\/li\u003e\n\u003cli\u003eDirect I2S Sound Port Connection: Utilizes the I2S sound port to connect directly to the Raspberry Pi 5's CPU, avoiding additional USB conversions and preserving audio signal integrity.\u003c\/li\u003e\n\u003cli\u003e192kHz\/24bit Support: Supports sample rates up to 192kHz with a 24-bit depth, ensuring a detailed and immersive listening experience.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe to NVMe SSD Slot\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eNVMe Storage Expansion: Integrated PCIe slot designed for NVMe 2230\/2242 SSDs allows users to significantly expand storage capacity and enhance data transfer speeds.\u003c\/li\u003e\n\u003cli\u003eHigh-Speed Data Access: Leveraging NVMe technology, the hat enables high-speed data access, making it suitable for various storage-intensive applications, such as media storage and data processing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR receiver:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eInfrared receiver on GPIO 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi 5 Compatibility\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eSpecifically designed to seamlessly integrate with the Raspberry Pi 5, ensuring compatibility and optimal performance\u003c\/li\u003e\n\u003cli\u003eHAT Form Factor: Easy to mount directly onto the Raspberry Pi 5 GPIO pins\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003ePlug-and-Play Installation: Designed for user convenience with plug-and-play installation\u003c\/li\u003e\n\u003cli\u003eCompact and Efficient: The board is compact, ensuring it does not obstruct adjacent components, and efficiently combines audio and storage capabilities in a single solution.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Applications\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Enhancement: Ideal for audio enthusiasts looking to enhance the audio output quality of their Raspberry Pi 5 projects.\u003c\/li\u003e\n\u003cli\u003eStorage Expansion: Suited for users seeking additional storage options for their Raspberry Pi 5-based applications, providing the flexibility to integrate NVMe SSDs.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 52Pi NVDAC board\u003c\/li\u003e\n\u003cli\u003e1 x PC104 pin header\u003c\/li\u003e\n\u003cli\u003e1 x M.2 2230 fixing copper pillar\u003c\/li\u003e\n\u003cli\u003e2 x Black M2.0 fixing screw for SSD drive\u003c\/li\u003e\n\u003cli\u003e2 x PCIe FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Copper pillar\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 Screw\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643817525309,"sku":"ezq1789697002577","price":24.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/nvdac-for-raspberry-pi-5_1.jpg?v=1789697007"},{"product_id":"m2-2242-e-key-top-for-raspberry-pi-5","title":"M.2 2242 E-Key Top for Raspberry Pi 5","description":"\u003cp\u003eThe 52Pi M.2 E-Key HAT (M01) provides a \u003cstrong\u003e2230\/2242 size M.2 E-key expansion slot\u003c\/strong\u003e for the Raspberry Pi 5, making it convenient to connect M.2 E-Key expansion cards, such as the Google Coral Edge TPU or other common wireless\/wired network cards etc.\u003c\/p\u003e\n\u003cp\u003eThis add-on is compatible with the standard HAT size of Raspberry Pi and \u003cstrong\u003esupports two sizes of M.2 cards: 2230 and 2242\u003c\/strong\u003e. The included mounting screws make it convenient to switch between the two sizes at any time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and M.2 device not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned for Raspberry Pi 5:\u003c\/strong\u003e Dedicated to the latest single-board computer from Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe Support:\u003c\/strong\u003e PCIe x1 interface in both Gen2 \u0026amp; Gen3 standards\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHollow design:\u003c\/strong\u003e Hollow design provides excellent ventilation airflow\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCamera\/Display FPC cutout:\u003c\/strong\u003e The openings in the PCB allow the routing of two Display\/Camera FPC cables\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGold-plated PCB:\u003c\/strong\u003e Superior electrical performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe ultra-short signal lines:\u003c\/strong\u003e The short trace routing of PCIe is more reliable and faster, fully meeting the signal requirements of PCIe 3.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Indicators:\u003c\/strong\u003e LED light for M.2 device status\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Standard-Compliant Power System:\u003c\/strong\u003e Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAccessories Included:\u003c\/strong\u003e Comes with an FPC PCIe ribbon, M2 and M2.5 screws, spacers, and an extra custom CNC SSD mount screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x M01 M.2 2242 E-key Top\u003c\/li\u003e\n\u003cli\u003e1 x 8.5x40mm PCIe FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e8 x M2.5x4mm Screws\u003c\/li\u003e\n\u003cli\u003e4 x M2.5x17mm Copper pillar\u003c\/li\u003e\n\u003cli\u003e1 x M2x4mm Screws(for fixing E-key extension board)\u003c\/li\u003e\n\u003cli\u003e1 x M2.5 Screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and M.2 device not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643824308285,"sku":"fce1789697084940","price":16.88,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/m2-2242-e-key-top-for-raspberry-pi-5_1.jpg?v=1789697089"},{"product_id":"mini-pcie-hat-for-raspberry-pi-5-m02","title":"Mini PCIe HAT for Raspberry Pi 5 (M02)","description":"\u003cp\u003eThe 52Pi Mini PCIe HAT (M02) is an expansion board for Raspberry Pi 5 which utilises the Pi 5's PCIe interface to provide seamless integration with \u003cstrong\u003eMini PCIe\u003c\/strong\u003e devices, such as network cards.\u003c\/p\u003e\n\u003cp\u003eIts compact design, plug-and-play functionality, and high-speed data transfer make it a valuable addition to various Raspberry Pi projects.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSome simple setup is required. \u003c\/span\u003ePlease see the Wiki for assembly and setup instructions\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and PCIe device not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi 5 Compatibility:\u003c\/strong\u003e Designed for use with the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini PCIe Expansion:\u003c\/strong\u003e The HAT extends the Raspberry Pi 5's capabilities by offering a Mini PCIe slot, allowing users to connect a variety of Mini PCIe devices, such as network cards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Data Transfer:\u003c\/strong\u003e Leveraging the PCIe interface, the HAT supports high-speed data transfer rates\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlug-and-Play Design:\u003c\/strong\u003e The HAT features a user-friendly, plug-and-play design for easy installation and setup\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact Form Factor:\u003c\/strong\u003e The HAT maintains a small footprint, allowing for versatile and space-efficient Raspberry Pi 5 projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnhanced Connectivity:\u003c\/strong\u003e Expanding the connectivity options of the Raspberry Pi 5, the HAT opens up possibilities for a range of Mini PCIe devices\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatile Applications:\u003c\/strong\u003e With support for Mini PCIe devices such as network cards, the HAT is suitable for a wide range of applications, including networking projects, IoT applications, and custom embedded systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003cli\u003eHow to enable the PCIex1 function on Raspberry Pi 5\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 52Pi Mini PCIe HAT M02 for RPi 5\u003c\/li\u003e\n\u003cli\u003e1 x 8.5 x 40mm FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e2 x M2.5 Ball head screw\u003c\/li\u003e\n\u003cli\u003e8 x M2.5x4mm screw\u003c\/li\u003e\n\u003cli\u003e4 x M2.5x17mm copper pillar\u003c\/li\u003e\n\u003cli\u003e1 x Screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and PCIe device not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643826405437,"sku":"brr1789697080910","price":14.07,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/mini-pcie-hat-for-raspberry-pi-5-m02_1.jpg?v=1789697101"},{"product_id":"nvdigi-for-raspberry-pi-5","title":"NVDigi for Raspberry Pi 5","description":"\u003cp\u003eThe 52Pi NVDigi is a versatile expansion board designed for the Raspberry Pi 5, combining Digi+ audio capabilities for \u003cstrong\u003ehigh-quality S\/PDIF audio output\u003c\/strong\u003e and an \u003cstrong\u003eM.2 PCIe x1 slot to\u003c\/strong\u003e \u003cstrong\u003eaccommodate NVMe 2242\/2230 SSDs\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eUnlock the full potential of your Raspberry Pi 5 with the 52Pi NVdigi, combining high-quality audio output with the convenience of M.2 PCIe NVMe SSD storage expansion. Transform your projects into versatile, multimedia-rich experiences with this innovative and feature-packed expansion board. The board offers both \u003cstrong\u003ean optical output (TOSLink) and an electrical output featuring an RCA port\u003c\/strong\u003e. It\u003cspan data-mce-fragment=\"1\"\u003e also \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003eincludes an IR receiver\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e (pin 22, GPIO 25).\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSome simple setup is required, using the existing HiFiBerry dtoverlay in Raspberry Pi OS. \u003c\/span\u003ePlease see the Wiki for assembly and setup instructions\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eNVME Compatibility\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003eSome customers have reported compatibility issues with certain brands\/models of NVME drives with Raspberry Pi 5.\u003c\/p\u003e\n\u003cp\u003eNo 'official' compatibility list is maintained by 52Pi or Raspberry Pi (yet), so\u003cspan\u003e \u003c\/span\u003ewe suggest following the same compatibility list on the Pimoroni NVME Base page\u003cspan\u003e \u003c\/span\u003eas a starting point until something official is shared.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality S\/PDIF Output:\u003c\/strong\u003e The NVdigi provides a high-quality S\/PDIF (Sony\/Philips Digital Interface) output for the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDirect I2S Sound Port Connection:\u003c\/strong\u003e Utilises the I2S sound port, connecting directly to the CPU without the need for additional USB conversion, ensuring optimal audio signal integrity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSample Rates up to 192kHz\/24bit:\u003c\/strong\u003e Supports high-resolution audio with sample rates up to 192kHz and 24-bit depth, delivering an immersive and detailed audio experience\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOptical (TOSLink) and Electrical (RCA) Outputs:\u003c\/strong\u003e Offers versatile connectivity options with both an optical output (TOSLink) and an electrical output featuring an RCA port.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpandable Storage:\u003c\/strong\u003e Features an M.2 PCIe x1 slot that supports NVMe 2242\/2230 SSDs, enabling you to significantly enhance your Raspberry Pi 5's storage capacity and speed.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Speed Data Transfer:\u003c\/strong\u003e Leveraging NVMe technology, the board facilitates high-speed data transfer, making it suitable for various applications such as media storage and data-intensive projects.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR receiver:\u003c\/strong\u003e Infrared receiver on GPIO 25\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRaspberry Pi 5 Compatibility:\u003c\/strong\u003e Specifically designed to seamlessly integrate with the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersatility in Applications: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eAudio Enthusiasts: Ideal for audio enthusiasts looking to achieve premium S\/PDIF audio output without compromising on quality.\u003c\/li\u003e\n\u003cli\u003eStorage Expansion: Suited for users seeking expanded storage options for their Raspberry Pi 5 projects, facilitating the use of NVMe SSDs for faster data access.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly Design: \u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eEasy Installation:The NVdigi offers a user-friendly design for straightforward installation on the Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eCompact Form Factor: Designed with a compact form factor, ensuring the board integrates seamlessly into your Raspberry Pi 5 setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Wiki\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 52Pi NVDigi board\u003c\/li\u003e\n\u003cli\u003e1 x PC104 pin header\u003c\/li\u003e\n\u003cli\u003e1 x PCIe FFC cable (40mm length)\u003c\/li\u003e\n\u003cli\u003e4 x M2.5 x 15mm Copper pillar\u003c\/li\u003e\n\u003cli\u003e8 x M2.5 x 4mm Flat head screw\u003c\/li\u003e\n\u003cli\u003e1 x M2.5 Screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi and NVMe drive not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"52Pi","offers":[{"title":"Default Title","offer_id":43643826765885,"sku":"sdc1789697120459","price":23.76,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/nvdigi-for-raspberry-pi-5_1.jpg?v=1789697126"},{"product_id":"adafruit-proto-under-plate-picowbell-for-pico-reset-button-stemma-qt","title":"Adafruit Proto Under Plate PiCowBell for Pico - Reset Button \u0026 STEMMA QT","description":"\u003cp\u003eThe Adafruit Proto Under Plate PiCowBell is intended to be treated like a mini solder-less proto plate to simplify programming and sensor connectivity for your Raspberry Pi Pico board. Reset button? Yes! STEMMA QT \/ Qwiic connector for fast I2C? Indeed. Plug-and-play so no soldering necessary when used with a Pico H or Pico WH? Here you go!\u003c\/p\u003e\n\u003cp\u003eThis board has double sockets already soldered on, you can plug in your Pico board directly in, and get access to a prototyping area underneath as well as a second row of socket pins. The second row means you can connect wires just by poking them into the header, either directly to LEDs or buttons or to jumper to a breadboard. So you don't have to look up or count pins, each socket is nicely labelled. There are also 4 mounting holes for easy attachment to an underplate.\u003c\/p\u003e\n\u003cp\u003eThe dual socket headers we use are 'hollow' - that means you can connect through the back if desired. Specifically, you can use Pico Stacking Headers to plug through to some other device that is expecting Pico pins. Also, in theory, if you soldered pin headers on the 'wrong side' of a Pico, you could plug it up through the bottom.\u003c\/p\u003e\n\u003cp\u003eWe recommend picking up a set of little rubber feet to protect your desk if you're not mounting this board to something else.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi Pico is \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003cp\u003eThe Proto Under Plate PiCowBell provides you with the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2x20 slim socket headers - plug in your Pico and have an extra row of sockets for each pin!\u003c\/li\u003e\n\u003cli\u003eRight angle reset button that sticks out the end\u003c\/li\u003e\n\u003cli\u003eRight angle JST SH connector for I2C \/ Stemma QT \/ Qwiic connection. Or can use it for plain GPIO wiring if you don't have any I2C devices to attach. Provides 3V, GND, IO4 (SDA), and IO5 (SCL)\u003cbr\u003eThere is an extra set of 4 breakout holes next to the JST SH if you want more I2C connections or want to re-assign the I2C port.\u003c\/li\u003e\n\u003cli\u003e3 hole-connected strips are in the centre area. You can cut the traces between the holes, but they're intended to be treated like a mini-mini breadboard\u003c\/li\u003e\n\u003cli\u003eEvery pad on the Pico has a duplicate hole pad next to it for solder-jumpering\u003c\/li\u003e\n\u003cli\u003eThe ground pads have white silkscreen rectangles to easily identify, plus one long ground strip near the reset button\u003c\/li\u003e\n\u003cli\u003eOne long strip of connected holes for 3.3V power\u003c\/li\u003e\n\u003cli\u003eGold-plated pads for easy soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe do not have I2C pullups on the board, but your Qwiic\/QT breakout board or accessory likely already has them onboard. If using the Philhower Arduino core, the Wire peripheral is already set up to use IO4 and IO5. If using CircuitPython or MicroPython, you'll need to let the code know to look at 4+5 for SDA+SCL pins.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/bd3OLmBaeys?si=BEYZSBwS1ehvhbdO\u0026amp;start=351\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 52.0mm x 38.2mm x 5.6mm\u003c\/li\u003e\n\u003cli\u003eWeight: 9.1g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643830861885,"sku":"dvd1789697327900","price":4.51,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/adafruit-proto-under-plate-picowbell-for-pico---reset-button-stemma-qt_1.jpg?v=1789697332"},{"product_id":"adafruit-terminal-picowbell-for-pico-reset-button-stemma-qt","title":"Adafruit Terminal PiCowbell for Pico - Reset Button \u0026 STEMMA QT","description":"\u003cp\u003eDing dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit Terminal PiCowbell is finally in stock and ready to assist your Raspberry Pi Pico and Pico W project with handy hardware and practical prototyping with screw terminal blocks for each and every pin.\u003c\/p\u003e \u003cp\u003eThis board is ideal for when you want quick access to connect solid or stranded core wires to any of the GPIO pads on the Pico. We use four 10-pin 2.54\" pitch screw terminal blocks that can fit 18~26 AWG solid or stranded core wires. Note that we really connect every pin 1-to-1 so there will be plenty of ground connects!\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003ePlease Note! To keep things flexible, this PiCowbell does not come with socket or pin headers, even though we have some example photos with not-included socket headers installed\u003c\/strong\u003e. There are many possible configurations, and we stock various headers depending on how you want to solder and attach them. This is especially true if you want the Pico on top so that the BOOTSEL button and LED are accessible.\u003c\/p\u003e \u003col\u003e \u003cli\u003eUse the Pico Stacking Headers if you want to plug into a breadboard or other accessory with sockets.\u003c\/li\u003e \u003cli\u003eUse the Pico Socket Headers if you want to plug directly in and have a nice, solid connection without any poking-out bits.\u003c\/li\u003e \u003cli\u003eUse the Short Socket Headers for a very slim but pluggable design, note that you'll want to trim down the Pico's headers or use the short plug headers on the Pico to have a skinny sandwich.\u003c\/li\u003e \u003cli\u003eSolder the PCB directly to the Pico headers - of course, this is very compact and inexpensive, but you won't be able to remove the PiCowbell.\u003cbr\u003eThe Terminal PiCowbell provides you with:\u003c\/li\u003e \u003c\/ol\u003e \u003cul\u003e \u003cli\u003eScrew Terminal blocks for each matching pad on the Pico or Pico W: 40 total pins, 40 total blocks\u003c\/li\u003e \u003cli\u003eRight angle reset button that sticks out the end\u003c\/li\u003e \u003cli\u003eRight angle JST SH connector for I2C \/ Stemma QT \/ Qwiic connection. Or can use it for plain GPIO wiring if you don't have any I2C devices to attach. Provides 3V, GND, IO4 (SDA), and IO5 (SCL)\u003cbr\u003eThere is an extra set of 4 breakout holes next to the JST SH in case you want more I2C connections or want to re-assign the I2C port.\u003c\/li\u003e \u003cli\u003e15 rows of 8-hole connected strips in the centre area. You can cut the traces between the holes, but they're intended to be treated like a mini-mini breadboard\u003c\/li\u003e \u003cli\u003eEvery pad on the Pico has a duplicate hole pad next to it for solder-jumpering\u003c\/li\u003e \u003cli\u003eThe ground pads have white silkscreen rectangles to easily identify, plus one long ground strip near the reset button\u003c\/li\u003e \u003cli\u003eOne long strip of connected holes for 3.3V power\u003c\/li\u003e \u003cli\u003eGold-plated pads for easy soldering\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003eWe do not have I2C pullups on the board, but your Qwiic\/QT breakout board or accessory likely already has them onboard. If using the Philhower Arduino core, the Wire peripheral is already set up to use IO4 and IO5. If using CircuitPython or MicroPython, you'll need to let the code know to look at 4+5 for SDA+SCL pins.\u003c\/p\u003e \u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/bd3OLmBaeys?si=WksfoE7MzOZpRUvk\u0026amp;start=173\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e \u003ch2\u003eSpecifications\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDimensions: 52.1mm x 43.1mm x 10.6mm\u003c\/li\u003e \u003cli\u003eWeight: 16.1g\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003ePrimary Guide\u003c\/li\u003e \u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643831156797,"sku":"cpq1789697347338","price":11.97,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/adafruit-terminal-picowbell-for-pico---reset-button-stemma-qt_1.jpg?v=1789697352"},{"product_id":"hatdrive-top-for-raspberry-pi-5","title":"HatDrive! Top for Raspberry Pi 5","description":"\u003cp\u003eIntroducing the Pineboards HatDrive! Top - the ultimate companion for your Raspberry Pi 5 designed to enhance your experience by allowing you to use fast and reliable NVMe storage with your Pi 5!\u003c\/p\u003e\n\u003cp\u003eThe HAT \u003cstrong\u003esupports M-key NVMe drives in M.2 format sizes 2230 and 2242\u003c\/strong\u003e (such as the Raspberry Pi SSD) and includes dual LED indicators, dedicated I2C EEPROM memory and advanced power supply monitoring and diagnostics.\u003c\/p\u003e\n\u003cp\u003eThe design is stackable when used with tall stacking GPIO headers, allowing the use of other HATs and add-ons. We also stock the HatDrive! Lite - a cheaper version which does not include the GPIO section.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWill my NVMe SSD work with this board?\u003c\/h3\u003e\n\u003cp\u003ePineboards maintain an NVMe compatibility list showing which drives work with their NVMe boards.\u003c\/p\u003e\n\u003cp\u003eOther NVMe drives may work however the link above shows all fully tested options - including the \u003cspan\u003ePinedrive 2242 NVMe SSD we stock in the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePCIe FPC Bundles now available\u003c\/h3\u003e\n\u003cp\u003eIn case you are thinking about integrating this board into your custom project, don't overlook the optional\u003cspan\u003e \u003c\/span\u003ePineboards PCIe FPC Bundle. Utilising the 100mm ribbon cable will provide you with added flexibility during the installation process of our boards.\u003c\/p\u003e\n\u003cp\u003eWe now stock an XL version of the bundle too!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecially Designed for Raspberry Pi 5:\u003c\/strong\u003e Dedicated to the latest single-board computer, the Raspberry Pi 5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe Drive Installation Capability:\u003c\/strong\u003e Supports installing NVMe (M-key) drives in M.2 format sizes 2230 and 2242.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe Interface Support:\u003c\/strong\u003e Offers support for PCIe x1 interface in both Gen2 and Gen3 standards.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual LED Indicators:\u003c\/strong\u003e Features 2 LED lights for power supply voltage (“PWR”) and M.2 disk activity (“ACT”).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Form Factor:\u003c\/strong\u003e Board format is compatible with the original Raspberry Pi HAT dimensions of 65 x 56.50 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40-Pin Raspberry Pi HAT Connector Support:\u003c\/strong\u003e Supports the standard 40-pin Raspberry Pi HAT connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDedicated I2C EEPROM Memory:\u003c\/strong\u003e Compatible with HAT ID, allowing for advanced identification and configuration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdvanced Power Supply Monitoring and Diagnostics:\u003c\/strong\u003e Continuous monitoring and diagnostics of the power supply bus, measuring voltage, current, and power parameters in real-time via an I2C interface.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Standard-Compliant Power System:\u003c\/strong\u003e Integrated voltage regulator delivering up to 3A for the 3.3V power rail, compliant with M.2 (NGFF) standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy and Quick M.2 Disk Installation:\u003c\/strong\u003e Quick installation of M.2 disks in 2230 or 2242 format, thanks to a dedicated metal bracket (custom CNC made).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Card Power Options:\u003c\/strong\u003e Capable of powering the M.2 card directly from the FPC PCIe ribbon (port providing a minimum of 5W continuous power) or through the 40-pin HAT connector.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly PCB Markings:\u003c\/strong\u003e Clear PCB markings for user convenience.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Components:\u003c\/strong\u003e Utilizes top-quality electronic components and a 4-layer PCB.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStackable Design:\u003c\/strong\u003e Allows for further connection of additional HAT boards in a stack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Necessary Accessories Included:\u003c\/strong\u003e Comes with a dedicated FPC PCIe ribbon, spacer pins, M2.5 screws, a spacer pin for M.2 card mounting, and an optional 28-pin male-female HAT connector.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eHatDrive! Top documentation\u003c\/li\u003e\n\u003cli\u003eHow to update the Firmware on your Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eHow to flash an NVMe boot drive with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\nHow to update your Raspberry Pi Kernel and install Kernel Headers\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HatDrive! Top board\u003c\/li\u003e\n\u003cli\u003e1x 25mm PCIe FPC cable with controlled impedance\u003c\/li\u003e\n\u003cli\u003e1x 40 pin GPIO header\u003c\/li\u003e\n\u003cli\u003e4x Standoffs\u003c\/li\u003e\n\u003cli\u003e1x M.2 drive standoff\u003c\/li\u003e\n\u003cli\u003e9x M2.5 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Pineboards","offers":[{"title":"Default Title","offer_id":43643832434749,"sku":"slb1789697456794","price":19.45,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/hatdrive-top-for-raspberry-pi-5_1.jpg?v=1789697461"},{"product_id":"hatdrive-top-lite-for-raspberry-pi-5","title":"HatDrive! Top Lite for Raspberry Pi 5","description":"\u003cp\u003eIntroducing the HatDrive! Top \u003cstrong\u003eLite\u003c\/strong\u003e - a streamlined variant of the HatDrive! Top designed for your Raspberry Pi 5 to enhance your experience with fast and reliable NVMe storage \u003cem\u003e(NVMe SSD not included)\u003c\/em\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version retains all the high-performance features of the original HatDrive! Top minus the 2x20 pin GPIO expansion header\u003c\/strong\u003e, making it a cost-effective solution for those not requiring board stacking capabilities.\u003c\/p\u003e\n\u003cp\u003eThe HAT \u003cstrong\u003esupports M-key NVMe drives in M.2 format sizes 2230 and 2242\u003c\/strong\u003e and includes dual LED indicators, dedicated I2C EEPROM memory and advanced power supply monitoring and diagnostics.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eWill my NVMe SSD work with this board?\u003c\/h3\u003e\n\u003cp\u003ePineboards maintain an NVMe compatibility list showing which drives work with their NVMe boards.\u003c\/p\u003e\n\u003cp\u003eOther NVMe drives may work however the link above shows all fully tested options - including the \u003cspan\u003ePinedrive 2242 NVMe SSD we stock in the store.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003ePCIe FPC Bundles now available\u003c\/h3\u003e\n\u003cp\u003eIn case you are thinking about integrating this board into your custom project, don't overlook the optional\u003cspan\u003e \u003c\/span\u003ePineboards PCIe FPC Bundle. Utilising the 100mm ribbon cable will provide you with added flexibility during the installation process of our boards.\u003c\/p\u003e\n\u003cp\u003eWe now stock an XL version of the bundle too!\u003c\/p\u003e\n\u003ch2\u003eIt fits our Layer Case!\u003c\/h2\u003e\n\u003cp\u003eThis Lite version of the HatDrive! Top fits perfectly in our Layer Case:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/layer_case_for_pineboards_top_hat_lite_1.jpg?v=1718891361\u0026amp;width=700\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpecially Designed for Raspberry Pi 5:\u003c\/strong\u003e Designed for the latest single-board computer, the Raspberry Pi 5.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNVMe Drive Installation Capability:\u003c\/strong\u003e Supports NVMe (M-key) drives in M.2 format sizes 2230 and 2242, facilitating high-speed storage solutions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePCIe Interface Support:\u003c\/strong\u003e Compatible with PCIe x1 interface in both Gen2 and Gen3 standards, offering versatile connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDual LED Indicators:\u003c\/strong\u003e Equipped with 2 LED indicators for power supply voltage (“PWR”) and M.2 disk activity (“ACT”), providing essential operational insights.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible Form Factor:\u003c\/strong\u003e Maintains compatibility with original Raspberry Pi HAT dimensions of 65 x 56.50 mm, ensuring a cohesive fit.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Standard-Compliant Power System:\u003c\/strong\u003e Integrates a voltage regulator capable of delivering up to 3A for the 3.3V power rail, in compliance with the M.2 (NGFF) standard.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEasy and Quick M.2 Disk Installation:\u003c\/strong\u003e Facilitates swift installation of M.2 disks in 2230 or 2242 formats, courtesy of a custom CNC made metal bracket.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eM.2 Card Power Options:\u003c\/strong\u003e Provides power to the M.2 card directly from the FPC PCIe ribbon or through an alternative power method, adapted for the lite version.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser-Friendly PCB Markings:\u003c\/strong\u003e Features clearly marked PCB for ease of installation and use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh-Quality Components:\u003c\/strong\u003e Built with premium electronic components and a 4-layer PCB for reliability and performance.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAll Necessary Accessories Included:\u003c\/strong\u003e Includes a dedicated FPC PCIe ribbon, spacer pins, M2.5 screws, and a spacer pin for M.2 card mounting, ensuring a complete setup out of the box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli style=\"text-align: justify;\"\u003eHatDrive! Top Lite documentation\u003c\/li\u003e\n\u003cli\u003eHow to update the Firmware on your Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003eHow to flash an NVMe boot drive with Raspberry Pi 5\u003c\/li\u003e\n\u003cli\u003e\nHow to update your Raspberry Pi Kernel and install Kernel Headers\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x HatDrive! Top Lite board\u003c\/li\u003e\n\u003cli\u003e1x 25mm PCIe FPC cable with controlled impedance\u003c\/li\u003e\n\u003cli\u003e4x Standoffs\u003c\/li\u003e\n\u003cli\u003e1x M.2 drive standoff\u003c\/li\u003e\n\u003cli\u003e9x M2.5 screws\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 and NVMe device not included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"Pineboards","offers":[{"title":"Default Title","offer_id":43643833745469,"sku":"bqs1789697544504","price":15.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/hatdrive-top-lite-for-raspberry-pi-5_1.jpg?v=1789697548"},{"product_id":"adafruit-terminal-picowbell-for-pico-with-pre-soldered-sockets-reset-button-stemma-qt","title":"Adafruit Terminal PiCowbell for Pico with Pre-Soldered Sockets - Reset Button \u0026 STEMMA QT","description":"\u003cp\u003eDing dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit Terminal PiCowbell is finally in stock and ready to assist your Raspberry Pi Pico and Pico W project with handy hardware and practical prototyping with screw terminal blocks for each and every pin.\u003c\/p\u003e\n\u003cp\u003eThis board is ideal for when you want quick access to connect solid or stranded core wires to any of the GPIO pads on the Pico. We use four 10-pin 2.54\" pitch screw terminal blocks that can fit 18~26 AWG solid or stranded core wires. Note that we connect every pin 1-to-1, so there will be plenty of ground connects!\u003c\/p\u003e\n\u003cp\u003eThe Pico is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note! This PiCowbell comes with pre-soldered socket headers. That makes it plug-and-play but means you cannot substitute short headers or stacking headers.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Terminal PiCowbell provides you with:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eScrew Terminal blocks for each matching pad on the Pico or Pico W: 40 total pins, 40 total blocks\u003c\/li\u003e\n\u003cli\u003eSingle-row socket headers to plug in your Pico or PicoW board.\u003c\/li\u003e\n\u003cli\u003eThe reset button that sticks out at the end\u003c\/li\u003e\n\u003cli\u003e\nJST SH connector for I2C \/ Stemma QT \/ Qwiic connection. Or can use it for plain GPIO wiring if you don't have any I2C devices to attach. Provides 3V, GND, IO4 (SDA), and IO5 (SCL)\u003cbr\u003eThere is an extra set of 4 breakout holes next to the JST SH if you want more I2C connections or want to re-assign the I2C port.\u003c\/li\u003e\n\u003cli\u003e12 rows of 4-hole connected strips in the centre area. You can cut the traces between the holes, but they're intended to be treated like a mini-mini breadboard\u003c\/li\u003e\n\u003cli\u003eEvery pad on the Pico has a duplicate hole pad next to it for solder-jumpering\u003c\/li\u003e\n\u003cli\u003eThe ground pads have white silkscreen rectangles to easily identify, plus one long ground strip near the reset button\u003c\/li\u003e\n\u003cli\u003eOne long strip of connected holes for 3.3V power\u003c\/li\u003e\n\u003cli\u003eGold-plated pads for easy soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe do not have I2C pullups on the board, but your Qwiic\/QT breakout board or accessory likely already has them onboard. If using the Philhower Arduino core, the Wire peripheral is already set up to use IO4 and IO5. If using CircuitPython or MicroPython, you'll need to let the code know to look at 4+5 for SDA+SCL pins.\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643833909309,"sku":"oto1789697552752","price":10.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/adafruit-terminal-picowbell-for-pico-with-pre-soldered-sockets---reset-button-st_1.jpg?v=1789697559"},{"product_id":"adafruit-proto-tripler-picowbell-for-pico-and-pico-w","title":"Adafruit Proto Tripler PiCowbell for Pico and Pico W","description":"\u003cp\u003eThe Adafruit Proto Tripler PiCowBell is intended to be treated like a mini solder-less proto plate to simplify programming and sensor or display connectivity for your Raspberry Pi Pico board. Reset button? Yes! STEMMA QT \/ Qwiic connector for fast I2C? Indeed. Battery with recharging and on\/off switch? Affirmative. Built-in NeoPixel? Bien sur! EYE SPI connector? Truly! All plug-and-play, so no soldering necessary when used with a Pico H or Pico WH? Here you go!\u003c\/p\u003e\n\u003cp\u003eThe Tripler is like if we used a 'Clone Tool' twice on the Proto Under Plate PiCowbell - you get three slots side-by-side, which means you can easily add two 'bell accessories to your Pico or Pico W without soldering on any stacking headers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Pico and other boards are \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch3\u003eLiPoly Battery Charging Support\u003c\/h3\u003e\n\u003cp\u003eThe Tripler also gives you Lipoly\/LiIon support circuitry to take your Pico project on the go. Use any 3.7V\/4.2V single-cell Lithium battery with a JST 2-PH connector in the correct polarity. The battery will automatically charge when the Pico is plugged into the USB and switch over seamlessly to the battery when the USB power is removed.\u003c\/p\u003e\n\u003cp\u003eBy default, the charge rate is 500mA for use with 500mAh+ sized batteries. You can cut a jumper to reduce the charge rate to 250mA if using 250mAh to 500mAh battery. So you don't have to unplug the battery often, a slide switch is connected to the Pico Enable pin, so you can disable the Pico's 3.3V power supply completely - this is as close as we can get to 'turning off' the Pico.\u003c\/p\u003e\n\u003ch3\u003eAlkaline\/NiMH Battery Pack Support\u003c\/h3\u003e\n\u003cp\u003eYou can also cut a different jumper to disconnect the charger completely from the battery, which means you can use 3x AA or 3x AAA battery packs for alkaline or NiMH battery usage. Of course, you will need an external NiMH charger in that case.\u003c\/p\u003e\n\u003ch3\u003eSTEMMA QT + EYESPI Connectors\u003c\/h3\u003e\n\u003cp\u003eAdd sensors and displays in an instant with a 4-Pin JST SH connector that is Qwiic \/ STEMMA QT compatible for just about any I2C sensor or device we stock. We do not have I2C pullups on the board, but your Qwiic\/QT breakout board or accessory likely already has them onboard. If using the Philhower Arduino core, the Wire peripheral is already set up to use IO4 and IO5. If using CircuitPython or MicroPython, you'll need to let the code know to look at 4+5 for SDA+SCL pins.\u003c\/p\u003e\n\u003cp\u003eFor colorful high-resolution output, connect any of our EYESPI displays with an 18-pin FPC cable. We connect most of the pins for SPI displays with SD card and touchscreen support. Note that we didn't wire through the Busy or Reset pins so E-Ink displays aren't recommended (they sometimes require those pins for deep sleep and wake-up)\u003c\/p\u003e\n\u003ch3\u003eDouble-row Socket Headers\u003c\/h3\u003e\n\u003cp\u003eThis board has double-row sockets already soldered on; you can plug in your Pico and 'Bell boards directly and access a prototyping area underneath and a second row of socket pins. The second row means you can connect wires just by poking them into the header, either directly to LEDs or buttons or to jumper to a breadboard. So you don't have to look up or count pins; each socket is nicely labeled. There are also 4 mounting holes for easy attachment to an underplate.\u003c\/p\u003e\n\u003cp\u003eThe double-row socket headers we use are 'hollow,' meaning you can connect through the back if desired. Specifically, you can use Pico Stacking Headers to plug into some other device that is expecting Pico pins. Also, in theory, if you soldered pin headers on the 'wrong side' of a Pico, you could plug it up through the bottom.\u003c\/p\u003e\n\u003cp\u003eIf you're not mounting this board to something else, we recommend picking up a set of rubber feet to protect your desk.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThree 2x20 slim socket headers - plug in your Pico and desired 'Bell and have an extra row of sockets for each pin!\u003c\/li\u003e\n\u003cli\u003eJST PH connector for LiIon\/LiPoly or Alkaline\/NiMH battery usage - be sure to cut the \"disable charge\" jumper to use Alkaline\/NiMH batteries.\u003c\/li\u003e\n\u003cli\u003eLiPoly\/LiIon charging circuitry for any 3.7V\/4.2V nominal 1-cell battery. The default rate is 500mA, which can be set to 250mA by cutting the charge-rate jumper on the bottom. Two indicator LEDs let you know if the battery is charging (orange) or complete (green)\u003c\/li\u003e\n\u003cli\u003eThe slide switch is connected to the Pico Enable pin, which will disable the 3.3V power supply.\u003c\/li\u003e\n\u003cli\u003eThe reset button that sticks out at the end\u003c\/li\u003e\n\u003cli\u003eJST SH connector for I2C \/ Stemma QT \/ Qwiic connection. Or can use it for plain GPIO wiring if you don't have any I2C devices to attach. Provides 3V, GND, IO4 (SDA), and IO5 (SCL)\u003c\/li\u003e\n\u003cli\u003eThere is an extra set of 4 breakout holes next to the JST SH if you want more I2C connections or want to re-assign the I2C port.\u003c\/li\u003e\n\u003cli\u003e3 hole-connected strips are in the centre areas. You can cut the traces between the holes, but they're intended to be treated like a mini-mini breadboard\u003c\/li\u003e\n\u003cli\u003eNearly every pad on the Pico has a duplicate hole pad next to it for solder-jumpering\u003c\/li\u003e\n\u003cli\u003eThe ground pads have white silkscreen rectangles to easily identify, plus one long ground strip near the reset button\u003c\/li\u003e\n\u003cli\u003eOne long strip of connected holes for 3.3V power\u003c\/li\u003e\n\u003cli\u003eGold-plated pads for easy soldering\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ciframe width=\"560\" height=\"315\" src=\"\/\/www.youtube.com\/embed\/TWc-P1OyMxQ?si=sH4ZOKm9OikfbliI\u0026amp;start=293\" title=\"YouTube video player\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions: 96.3mm x 51.8mm x 6.8mm\u003c\/li\u003e\n\u003cli\u003eWeight: 25.0g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePrimary Guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":43643834007613,"sku":"rkq1789697563095","price":9.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/adafruit-proto-tripler-picowbell-for-pico-and-pico-w_1.jpg?v=1789697569"},{"product_id":"m-bus-slave-hat-for-raspberry-pi-pico","title":"M-Bus Slave HAT for Raspberry Pi Pico","description":"\u003cp\u003eThis M-Bus Slave HAT is an add-on board that allows the Raspberry Pi Pico to function as an M-Bus (meter bus) slave node. It is based on the TSS721 M-Bus Transceiver IC and provides communication via UART0 or UART1.\u003c\/p\u003e\n\u003cp\u003eThe HAT features an isolated interface and can be used to read consumption meters with a P1 customer interface or create custom meters for M-Bus systems. Software support includes example codes for Arduino IDE to read meters and implement simple meter functions.\u003c\/p\u003e\n\u003cp\u003eWe also have the M-Bus Master HAT here\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi Pico is \u003cstrong\u003eNOT\u003c\/strong\u003e included\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eM-Bus (meter bus) slave node\u003c\/li\u003e\n\u003cli\u003eBased on the TSS721 M-Bus Transceiver IC\u003c\/li\u003e\n\u003cli\u003eCommunication with Pico via UART0 or UART1\u003c\/li\u003e\n\u003cli\u003eIsolated Interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnection Example - Electric Meter with P1 Port\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/M-Bus_Slave_HAT_features_1.jpg?v=1719305764\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eArduino IDE\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eOn our GitHub account we have provided example code for reading consumption meters with P1 customer interface and DLMS\/COSAM protocol\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003eThe \u003c\/span\u003eArduino M-BUS meter\u003cspan\u003e example shows how you can program your own simple meters\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Zihatec","offers":[{"title":"Default Title","offer_id":43643838005309,"sku":"arx1789697718482","price":20.57,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/m-bus-slave-hat-for-raspberry-pi-pico_1.jpg?v=1789697722"},{"product_id":"breakout-card-kit-pluggable-prototype-breadboard-smth-for-raspberry-pi","title":"Breakout Card Kit Pluggable-Prototype-Breadboard SM\/TH for Raspberry Pi","description":"\u003cp\u003eThis Breakout Card Kit for Raspberry Pi is a pluggable prototype breadboard designed for both surface mount (SM) and through-hole (TH) projects. The kit includes a main card that connects all Raspberry Pi GPIO pins to robust pluggable terminal blocks. The GPIO pins are initially linked to a 2 x 20-hole array, then rerouted to three 2 x 12-pin headers for easy external or add-on card connections. Each GPIO pin is clearly labelled for easier identification. The main board also features a 12 x 22 hole array for through-hole projects, with a top VCC bus bar and a bottom ground bus, both configurable via a 3-pin jumper.\u003c\/p\u003e\n\u003cp\u003eThe kit also comes with two add-on cards for advanced projects.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe\u003c\/strong\u003e \u003cstrong\u003efirst add-on card\u003c\/strong\u003e caters to various surface mount ICs with pitches of 0.635mm, 0.5mm, and 1.27mm, along with slots for SOT23-5 and SOT23-3 footprints. Its design mirrors the main board, including a selectable VCC bus and an expansive 2.54mm pitch-hole grid.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThe second add-on card\u003c\/strong\u003e is tailored for 0.65mm pitch circuits and features breakout areas for LQFP32 and LQFP48 microprocessor footprints. Each add-on card connects easily to the main board using three 2 x 12 female headers, providing easy integration for diverse electronic projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: Raspberry Pi is \u003cstrong\u003eNOT \u003c\/strong\u003eincluded\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBreakout Card Kit Pluggable-Prototype-Breadboard SM\/TH for Raspberry Pi\u003c\/li\u003e\n\u003cli\u003eRoutes all 40 I\/O and power pins to pluggable terminal blocks\u003c\/li\u003e\n\u003cli\u003eMain card with prototype area for Through Hole projects\u003c\/li\u003e\n\u003cli\u003eTwo add-on cards with prototype areas for Surface Mount projects\u003c\/li\u003e\n\u003cli\u003e3.5mm Pitch Heavy Duty Pluggable Terminal Block Connectors\u003c\/li\u003e\n\u003cli\u003eAll connector plugs included\u003c\/li\u003e\n\u003cli\u003eWire range: 24 - 14 AWG\u003c\/li\u003e\n\u003cli\u003eBrass standoffs, screws and nuts included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat's on Board - Main Board\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Breakout_Card_Kit_Pluggable-Prototype-Breadboard_SM_TH_for_Raspberry_Pi_features_1.jpg?v=1720525493\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAdd-on Card #1\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Breakout_Card_Kit_Pluggable-Prototype-Breadboard_SM_TH_for_Raspberry_Pi_contents_1.jpg?v=1720526026\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eAdd on Card #2\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/Breakout_Card_Kit_Pluggable-Prototype-Breadboard_SM_TH_for_Raspberry_Pi_specs_1.jpg?v=1720526026\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3x Breakout Breadboard Prototype Cards\u003c\/li\u003e\n\u003cli\u003eBoard Mounted Connectors\u003c\/li\u003e\n\u003cli\u003eConnector Plugs\u003c\/li\u003e\n\u003cli\u003eMounting Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sequent","offers":[{"title":"Default Title","offer_id":43643840331837,"sku":"dww1789697772748","price":19.55,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/breakout-card-kit-pluggable-prototype-breadboard-smth-for-raspberry-pi_1.jpg?v=1789697776"}],"url":"https:\/\/laser-engraved-clasp.shop\/collections\/raspberry-pi-hats-phats-gpio.oembed","provider":"My Store","version":"1.0","type":"link"}