{"product_id":"challenger-m0-wifi","title":"Challenger M0 WiFi","description":"\u003cp\u003eThe iLabs Challenger M0 WiFi is an Arduino compatible Adafruit Feather format microcontroller board packed with loads of functionality for real time sensitive projects that require a WiFi connection.\u003c\/p\u003e\n\u003cp\u003eFor this board, we took Adafruit’s Feather M0 Express, which also happens to be a personal favourite of iLabs, and added an ESP8285 chip to it to give it extensive WiFi capability. With the experience that iLabs already had with the ESP8266, they knew it was the right way to go!\u003c\/p\u003e\n\u003cp\u003eSo the main controller of this board is the trusty SAMD21 with 256KByte of FLASH memory and 32KByte of SRAM. And just like the Feather M0 Express there is also an external 2Mbyte flash memory where you can store files systems or whatever that you need.\u003c\/p\u003e\n\u003ch3\u003eWiFi\u003c\/h3\u003e\n\u003cp\u003eiLabs added an ESP8285 chip to this board. For those of you unfamiliar with this device, it is basically an ESP8266 device with an integrated 1MByte of flash memory. This allows us to have an AT command interpreter inside this chip that the main controller can talk to and connect to your local WiFi network. The communications channel between the two devices is an unused UART on the main controller and the standard UART on the ESP8285.\u003c\/p\u003e\n\u003cp\u003eThe ESP8285 chip comes pre-flashed with Espressif’s AT command interpreter stored in the internal 1MByte of the ESP8285. This interpreter support all of the operating and sleep modes of the standard ESP8266 framework which makes it easy to work with. Talking to the device is as easy as opening the second serial port (Serial2), resetting the ESP8285 and start listening for events and sending commands. To simplify this process we are also developing a library that is compatible with the standard ESP8266 environment.\u003c\/p\u003e\n\u003ch3\u003eSoftware\u003c\/h3\u003e\n\u003cp\u003eThe Challenger M0 WiFi board is 100% compatible with the Arduino framework. It has a unique board support package that fully supports all the features of the board. You can also install and run CircuitPython on the board if this is what you want to do.\u003c\/p\u003e\n\u003cp\u003eWhile it is possible to run CircuitPython or micropython on this board we do not recommend it. The RAM size is just not enough to be able to take advantage of the libraries available to control the WiFi chip on board. We have made available a UF2 image that you can use to try it out but we will not push this to the main CircuitPython repo.\u003c\/p\u003e\n\u003ch3\u003eUSB Type C\u003c\/h3\u003e\n\u003cp\u003eIn recent years we have noticed that we are seeing more and more USB Type-C cables laying around the lab due to the fact that most new phones and accessories use them. So iLabs decided to go for a USB Type-C connector for this board. A bonus of this is that they are more durable and you don’t have to fiddle with the cable before plugging it in!\u003c\/p\u003e\n\u003cp\u003eThe board comes with loose headers that can be soldered to the board if your application requires it.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSturdy USB Type C connector\u003c\/li\u003e\n\u003cli\u003eATSAMD21G18 @ 48MHz with 3.3V power\u003c\/li\u003e\n\u003cli\u003e256KB FLASH + 32KB RAM\u003c\/li\u003e\n\u003cli\u003e2 MByte of NOR FLASH memory\u003c\/li\u003e\n\u003cli\u003e32.768 KHz crystal for clock generation \u0026amp; RTC\u003c\/li\u003e\n\u003cli\u003e3.3V regulator with 600mA peak current output, most of which is reserved for the board itself\u003c\/li\u003e\n\u003cli\u003eUSB native support, comes with UF2 USB bootloader\u003c\/li\u003e\n\u003cli\u003e20 GPIO pins\u003c\/li\u003e\n\u003cli\u003eHardware Serial, hardware I2C, hardware SPI support\u003c\/li\u003e\n\u003cli\u003ePWM outputs on all pins\u003c\/li\u003e\n\u003cli\u003e6 x 12-bit analog inputs\u003c\/li\u003e\n\u003cli\u003e1 x 10-bit analog ouput (DAC)\u003c\/li\u003e\n\u003cli\u003eBuilt-in 250mA lipoly charger with charging status indicator LED\u003c\/li\u003e\n\u003cli\u003ePin #13 red LED for general purpose blinking\u003c\/li\u003e\n\u003cli\u003ePower\/enable pin\u003c\/li\u003e\n\u003cli\u003e4 mounting holes\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003eESP8285 WiFi chip with onboard antenna\u003c\/li\u003e\n\u003cli\u003eNeopixel-compatible LED that indicates board status but that can be used by the programmer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eMain Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSAMD21G18A 3.3V\u003c\/li\u003e\n\u003cli\u003e256 KByte FLASH Memory\u003c\/li\u003e\n\u003cli\u003e32 KByte SRAM Memory\u003c\/li\u003e\n\u003cli\u003e1 Hardware I2C channel\u003c\/li\u003e\n\u003cli\u003e1 Hardware SPI channel\u003c\/li\u003e\n\u003cli\u003e1 Hardware UART for the user\u003c\/li\u003e\n\u003cli\u003e1 Hardware UART connected to the network processor\u003c\/li\u003e\n\u003cli\u003e12 Bit ADC\u003c\/li\u003e\n\u003cli\u003e32.768 Crystal oscillator for low power operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNetwork Processor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eESP8285 with internal 1MByte FLASH Memory\u003c\/li\u003e\n\u003cli\u003eWiFi (2.4GHz)\u003c\/li\u003e\n\u003cli\u003eEspressif AT Interpretor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBoard\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 MByte external SPI FLASH memory\u003c\/li\u003e\n\u003cli\u003eNeopixel-compatible LED\u003c\/li\u003e\n\u003cli\u003eLiPo charger circuit with 250mA charging current\u003c\/li\u003e\n\u003cli\u003eUSB Type C connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0176\/3274\/files\/challenger-m0-wifi-pinout-diagram_1.jpg?v=1649248308\u0026amp;width=700\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino board package source files\u003c\/li\u003e\n\u003cli\u003eSimple AT command library and example to get started using the Challenger with AT commands\u003c\/li\u003e\n\u003cli\u003eHardware files\u003c\/li\u003e\n\u003cli\u003eEspressif AT Command set\u003c\/li\u003e\n\u003cli\u003eRF Tuning results\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eArduino\u003c\/h3\u003e\n\u003cp\u003eHere’s a short step by step instruction on how to install the Arduino board support package that you need to be able to access all the features of the board.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStart your Arduino IDE (It needs to be 1.8.5 or higher)\u003c\/li\u003e\n\u003cli\u003eSelect menu choice “File” and then “Preferences”. You can also type Ctrl+comma (Ctrl-,) on your keyboard.\u003c\/li\u003e\n\u003cli\u003eNow add the URL “https:\/\/invector.se\/files\/package_ilabs_index.json” into the “Additional Boards Manager URLs” field.\u003c\/li\u003e\n\u003cli\u003eClick OK to close the preferences dialog.\u003c\/li\u003e\n\u003cli\u003eNow open the Boards Manager by selecting it in the “Tools-\u0026gt;Board:” menu\u003c\/li\u003e\n\u003cli\u003eScroll down until you see “Invector SAMD Boards” or search for Invector.\u003c\/li\u003e\n\u003cli\u003eMove your mouse to the box and click on install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThat is it, when the process is done you are ready to select the “Invector Labs Challenger M0 WiFi” board in the board menu and start writing software for it.\u003c\/p\u003e\n\u003ch3\u003eCircuitPython\/MicroPython\u003c\/h3\u003e\n\u003cp\u003eWhile it is possible to run CircuitPython or MicroPython on this board we do not recommend it. The RAM size is just not enough to be able to take advantage of the libraries available to control the WiFi chip on board. We have made available a UF2 image that you can use to try it out but we will not push this to the main Circuitpython repo.\u003c\/p\u003e\n\u003cp\u003eYou can download this test firmware here.\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Challenger M0 WiFi board\u003c\/li\u003e\n\u003cli\u003e2x Pin headers\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iLabs","offers":[{"title":"Default Title","offer_id":43643671117885,"sku":"hsh1789691967711","price":22.1,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/challenger-m0-wifi_1.jpg?v=1789691972","url":"https:\/\/laser-engraved-clasp.shop\/products\/challenger-m0-wifi","provider":"My Store","version":"1.0","type":"link"}