{"product_id":"maker-nano-rp2040","title":"Maker Nano RP2040","description":"\u003cp\u003eThe Maker Nano RP2040 has the same form-factor as the popular Arduino Nano but is powered by the much more powerful RP2040 from Raspberry Pi.\u003c\/p\u003e\n\u003cp\u003eThis also means it's compatible with \u003cem\u003emost\u003c\/em\u003e of the shields available for the Arduino Nano. It's also breadboard-friendly allowing you to prototype your circuit with ease.\u003c\/p\u003e\n\u003cp\u003eThe board also includes some great onboard features such as IO indicator LEDs, 2x Neopixel-compatible RGB LEDs, piezo buzzer, a programmable button and two ports compatible with Qwiic, STEMMA and Grove (via included conversation cable).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e: The IO voltage is 3.3V and it's not 5V compatible. There are only four ADC inputs (A0 - A3) on the Maker Nano RP2040 compared to the eight on the Arduino Nano.\u003c\/p\u003e\n\u003ch2\u003eSimplifying Digital Making\u003c\/h2\u003e\n\u003cp\u003eJust like the other Maker series products, there are plentiful LEDs on the Maker Nano RP2040 (well, who doesn't like LEDs?). Those LEDs are not just for a nice visual effect, they also represent the status of each pin and this makes troubleshooting your circuit a breeze.\u003c\/p\u003e\n\u003cp\u003eNot too excited about the single-colour blue LEDs? Worry not! Cytron has also put in two RGB LEDs (WS2812 Neopixel-compatible) to add more colour to your project. You can also program them to dance together with the melody produced by the onboard piezo buzzer. To change to another melody, press the onboard push button. If something goes wrong with your code and the buzzer keeps playing, mute it with the sliding switch.\u003c\/p\u003e\n\u003cp\u003eAll of these can be done with the Maker Nano RP2040 alone without additional circuitry. Wiring up your own circuit is always the most tedious part of learning electronics. It's prone to error and sometimes not reversible. We know it because we've gone through that before many times!\u003c\/p\u003e\n\u003cp\u003eWhen the onboard peripherals are not enough for you, additional sensors or modules can be added via the newly introduced Maker Ports. Utilizing the popular JST-SH 4-way connector, Maker Ports are compatible with Sparkfun Qwiic modules and Adafruit STEMMA QT modules. Qwiic and STEMMA QT use I2C communications and can be daisy-chained. By using the included JST-SH to Grove conversion cables, Maker Ports are compatible with Seeed Grove modules too.\u003c\/p\u003e\n\u003cp\u003eMaker Ports also support UART (Maker Port 0 only), Analog Input (Maker Port 1 only) and Digital Input\/Output.\u003c\/p\u003e\n\u003ch2\u003eOne Board, Multiple Programming Languages\u003c\/h2\u003e\n\u003cp\u003eThe Raspberry Pi RP2040 can be programmed with C\/C++ (Natively or with Arduino IDE support), MicroPython or CircuitPython.\u003c\/p\u003e\n\u003cp\u003eWith massive libraries support and examples especially in Arduino IDE and CircuitPython, you will be ready to build your application in no time, be it for learning purposes or for building a useful project.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArduino Nano form factor\u003c\/li\u003e\n\u003cli\u003ePowered by Raspberry Pi RP2040\n\u003cul\u003e\n\u003cli\u003eDual-core Arm Cortex-M0+ processor\u003c\/li\u003e\n\u003cli\u003e264KB internal RAM\u003c\/li\u003e\n\u003cli\u003e2MB of Flash memory\u003c\/li\u003e\n\u003cli\u003eSame specifications with Raspberry Pi Pico\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e14x Status indicator LEDs for GPIOs\u003c\/li\u003e\n\u003cli\u003e1x Piezo buzzer with mute switch\u003c\/li\u003e\n\u003cli\u003e1x Pushbutton\u003c\/li\u003e\n\u003cli\u003e2x RGB LEDs (WS2812 Neopixel)\u003c\/li\u003e\n\u003cli\u003e2x Maker Ports, compatible with Qwiic, STEMMA QT, Grove (via conversion cable)\u003c\/li\u003e\n\u003cli\u003eSupport Arduino IDE, CircuitPython and MicroPython\u003c\/li\u003e\n\u003cli\u003eDimensions: 49.53mm x 21.08mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaker Nano Model Comparison\u003c\/h2\u003e\n\u003cp\u003eYou may have already seen the original Maker Nano in the store. This table shows the differences between the boards:\u003c\/p\u003e\n\u003ctable width=\"542\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"178\"\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"176\"\u003e\u003cstrong\u003eMaker Nano\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"188\"\u003e\u003cstrong\u003eMaker Nano RP2040\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicrocontroller\u003c\/td\u003e\n\u003ctd\u003eATmega328P\u003c\/td\u003e\n\u003ctd\u003eRP2040\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLanguage\u003c\/td\u003e\n\u003ctd\u003eArduino IDE (C\/C++)\u003c\/td\u003e\n\u003ctd width=\"188\"\u003eArduino IDE (C\/C++)\u003cbr\u003eMicropython\u003cbr\u003eCircuitPython\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Voltage\u003c\/td\u003e\n\u003ctd\u003e5V\u003c\/td\u003e\n\u003ctd\u003e3.3V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDigital I\/O Pins\u003c\/td\u003e\n\u003ctd\u003e20\u003c\/td\u003e\n\u003ctd\u003e22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePWM\u003c\/td\u003e\n\u003ctd\u003e6\u003c\/td\u003e\n\u003ctd\u003e14 (Reassignable Pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAnalog Input\u003c\/td\u003e\n\u003ctd\u003e8 (10-bit)\u003c\/td\u003e\n\u003ctd\u003e4 (12-bit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUART\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2 (Reassignable Pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSPI\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2 (Reassignable Pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI2C\u003c\/td\u003e\n\u003ctd\u003e1\u003c\/td\u003e\n\u003ctd\u003e2 (Reassignable Pin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExternal Interrupt\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003ctd\u003e22 (All GPIO)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlash Memory\u003c\/td\u003e\n\u003ctd\u003e32KB\u003c\/td\u003e\n\u003ctd\u003e2MB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSRAM\u003c\/td\u003e\n\u003ctd\u003e2KB\u003c\/td\u003e\n\u003ctd\u003e264KB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEEPROM\/Data Flash\u003c\/td\u003e\n\u003ctd\u003e1KB\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClock Speed\u003c\/td\u003e\n\u003ctd\u003e16MHz\u003c\/td\u003e\n\u003ctd\u003e125MHz (Default)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003eVin or USB\u003c\/td\u003e\n\u003ctd\u003eVin or USB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVin Voltage\u003c\/td\u003e\n\u003ctd\u003e7 30V\u003c\/td\u003e\n\u003ctd\u003e7-30V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUSB Support\u003c\/td\u003e\n\u003ctd\u003eUSB to Serial (CH340C)\u003c\/td\u003e\n\u003ctd\u003eUSB host and device\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgrammable LED\u003c\/td\u003e\n\u003ctd\u003e12x at Pin D2-D13\u003c\/td\u003e\n\u003ctd\u003e14x at Pin DO-D9, D16-D18\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProgrammable Button\u003c\/td\u003e\n\u003ctd\u003e1x at Pin D2\u003c\/td\u003e\n\u003ctd\u003e1x at Pin D20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePiezo Buzzer\u003c\/td\u003e\n\u003ctd\u003e1x at Pin D8\u003c\/td\u003e\n\u003ctd\u003e1x at Pin D22\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGB LED\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e2x at Pin D11\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaker Port\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDimension\u003c\/td\u003e\n\u003ctd\u003e45.8 X 21.1mm\u003c\/td\u003e\n\u003ctd\u003e49.6 X 21.1mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Maker Nano RP2040\u003c\/li\u003e\n\u003cli\u003e2 x Grove to JST-SH (Qwiic \/ STEMMA QT) Cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMaker Nano RP2040 Pinout Diagram\u003c\/li\u003e\n\u003cli\u003eMaker Nano RP2040 Datasheet\u003c\/li\u003e\n\u003cli\u003e3D CAD\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Cytron","offers":[{"title":"Default Title","offer_id":43643619639357,"sku":"jhg1789691287613","price":10.75,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/maker-nano-rp2040_1.jpg?v=1789691293","url":"https:\/\/laser-engraved-clasp.shop\/products\/maker-nano-rp2040","provider":"My Store","version":"1.0","type":"link"}