{"product_id":"picoio64-64-io-for-pico","title":"PicoIO64 - 64 IO for Pico","description":"\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eIO for days! \u003c\/strong\u003eThis Pico add-on from 8086 gives your Raspberry Pi Pico \u003cstrong\u003e64\u003c\/strong\u003e additional 3.3V, 5V-tolerant IOs for your project. \u003cem\u003eMucho pins!\u003c\/em\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003e\u003cspan\u003eThe PicoIO64 adds 64 3.3V I\/O pins (5V tolerant) to the Raspberry Pi Pico using four 16-bit XRA1403 SPI I\/O Expanders coupled with an 800mA 3.3V regulator. The I\/O can be used for front panel LED, buttons interfaces and more - whatever your (big!) project needs.\u003c\/span\u003e\u003c\/p\u003e \u003cp\u003eThe I\/O is arranged in two banks each with two 16-bit SPI expanders A\/B and C\/D, each bank has its own SPI connection, IRQ, RESET and individual IC chip selects (CS_A\/CS_B and CS_C\/CS_D). Splitting the banks like this allows each bank's SPI interface to be controlled using a dedicated core of the RP2040\/RP2350 at up to 26Mhz.\u003c\/p\u003e \u003cp\u003eThe XRA1403 I\/O expanders are fully featured, each of the I\/O pins can be configured as push-pull output (optional three-state mode), input (optional polarity inversion, optional ~100k pull-up resistor) and a multitude of interrupt options (rising\/falling edge, filters, etc.).\u003c\/p\u003e \u003cp\u003eThe I\/O expanders can source\/sink a maximum of 25mA per pin, up to 100mA per bank of 8 pins (0-7, 8-15) and overall the IC can source 160mA over all 16 pins.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eNote: we stock the pre-soldered version of the PicoIO64\u003c\/strong\u003e.\u003c\/p\u003e \u003ch2\u003ePinout\u003c\/h2\u003e \u003cp\u003eThe GPIO connections are documented on the underside of the PCB are shown in the table below.\u003c\/p\u003e \u003ctable width=\"409\"\u003e \u003ctbody\u003e \u003ctr\u003e \u003ctd width=\"89\"\u003e\u003cstrong\u003eSignal\u003c\/strong\u003e\u003c\/td\u003e \u003ctd width=\"75\"\u003e\u003cstrong\u003eGPIO\u003c\/strong\u003e\u003c\/td\u003e \u003ctd width=\"245\"\u003e\u003cstrong\u003eDescription\u003c\/strong\u003e\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSI_AB\u003c\/td\u003e \u003ctd\u003eGP19\u003c\/td\u003e \u003ctd\u003eSPI IN for Expanders A\/B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSO_AB\u003c\/td\u003e \u003ctd\u003eGP20\u003c\/td\u003e \u003ctd\u003eSPI OUT for Expanders A\/B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSCL_AB\u003c\/td\u003e \u003ctd\u003eGP18\u003c\/td\u003e \u003ctd\u003eSPI Clock for Expanders A\/B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e!IRQ_AB\u003c\/td\u003e \u003ctd\u003eGP16\u003c\/td\u003e \u003ctd\u003eIRQ notify from Expanders A\/B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e!RST_AB\u003c\/td\u003e \u003ctd\u003eGP15\u003c\/td\u003e \u003ctd\u003eRESET for Expanders A\/B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCS_A\u003c\/td\u003e \u003ctd\u003eGP21\u003c\/td\u003e \u003ctd\u003eSPI chip select for Expander A\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCS_B\u003c\/td\u003e \u003ctd\u003eGP17\u003c\/td\u003e \u003ctd\u003eSPI chip select for Expander B\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSI_CD\u003c\/td\u003e \u003ctd\u003eGP11\u003c\/td\u003e \u003ctd\u003eSPI IN for Expanders C\/D\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSO_CD\u003c\/td\u003e \u003ctd\u003eGP12\u003c\/td\u003e \u003ctd\u003eSPI OUT for Expanders C\/D\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eSCL_CD\u003c\/td\u003e \u003ctd\u003eGP10\u003c\/td\u003e \u003ctd\u003eSPI Clock for Expanders C\/D\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e!IRQ_CD\u003c\/td\u003e \u003ctd\u003eGP5\u003c\/td\u003e \u003ctd\u003eIRQ notify from Expanders C\/D\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003e!RST_CD\u003c\/td\u003e \u003ctd\u003eGP14\u003c\/td\u003e \u003ctd\u003eRESET for Expanders C\/D\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCS_C\u003c\/td\u003e \u003ctd\u003eGP13\u003c\/td\u003e \u003ctd\u003eSPI chip select for Expander C\u003c\/td\u003e \u003c\/tr\u003e \u003ctr\u003e \u003ctd\u003eCS_D\u003c\/td\u003e \u003ctd\u003eGP2\u003c\/td\u003e \u003ctd\u003eSPI chip select for Expander D\u003c\/td\u003e \u003c\/tr\u003e \u003c\/tbody\u003e \u003c\/table\u003e \u003ch2\u003eFeatures\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e64 additional I\/O pins (3.3V, 5V tolerant) for Raspberry Pi Pico\u003c\/li\u003e \u003cli\u003eFour XRA1403 SPI I\/O expanders (16-bit) coupled with 800mA 3.3V regulator\u003c\/li\u003e \u003cli\u003eCircuitPython library available\u003c\/li\u003e \u003cli\u003eTwo I\/O banks (A\/B and C\/D)\u003c\/li\u003e \u003cli\u003eConfigurable I\/O pins\u003c\/li\u003e \u003cli\u003eMultiple interrupt options\u003c\/li\u003e \u003cli\u003eCurrent limits: \u003cul\u003e \u003cli\u003e25mA per pin\u003c\/li\u003e \u003cli\u003e100mA per bank of 8-pins (0-7, 8-15)\u003c\/li\u003e \u003cli\u003e160mA per 16-pin expander\u003c\/li\u003e \u003c\/ul\u003e \u003c\/li\u003e \u003cli\u003ePre-soldered\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003eResources\u003c\/h2\u003e \u003cul\u003e \u003cli\u003eDocumentation\u003c\/li\u003e \u003cli\u003eCircuitPython XRA1403 library\u003c\/li\u003e \u003cli\u003eXRA1403 product page\u003c\/li\u003e \u003c\/ul\u003e \u003ch2\u003ePackage Contents\u003c\/h2\u003e \u003cul\u003e \u003cli\u003e1x PicoIO64 (pre-soldered)\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eRaspberry Pi Pico not included\u003c\/strong\u003e\u003c\/p\u003e","brand":"8086","offers":[{"title":"Default Title","offer_id":43643944763453,"sku":"aqq1789699579368","price":10.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/picoio64---64-io-for-pico_1.jpg?v=1789699586","url":"https:\/\/laser-engraved-clasp.shop\/products\/picoio64-64-io-for-pico","provider":"My Store","version":"1.0","type":"link"}