{"product_id":"pololu-12v-medium-power-341-25d-metal-gearmotor","title":"Pololu 12V Medium-Power 34:1 25D Metal Gearmotor","description":"\u003cp\u003e\u003cspan\u003eThis Pololu 25D gearmotor consists of a \u003cstrong\u003emedium\u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e-power, 12V\u003c\/strong\u003e\u003cspan\u003e brushed DC motor combined with a \u003cstrong\u003e34:1\u003c\/strong\u003e (\u003c\/span\u003e\u003cstrong\u003e34.014:1)\u003c\/strong\u003e\u003cspan\u003e metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25mm, and the D-shaped output shaft is 4mm in diameter and extends 12.5mm from the faceplate of the gearbox.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIn general, these kinds of motors can run at voltages above and below their nominal voltages (they can begin rotating at voltages as low as 1V); lower voltages might not be practical, and higher voltages could start negatively affecting the life of the motor. \u003cspan\u003eThis motor\u003cstrong\u003e will run at 6V but is intended for operation at 12V\u003c\/strong\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe also stock low-power and high-power versions of this motor. You can find our entire range of motors here.\u003c\/p\u003e\n\u003cp class=\"note_warning\"\u003e\u003cstrong\u003eNote: Stalling or overloading gearmotors can greatly decrease their lifetimes and even result in immediate damage.\u003c\/strong\u003e The listed stall torques and currents are theoretical extrapolations; units will typically stall well before these points as the motors heat up. The recommended upper limit for continuously applied loads is 4 kg⋅cm (55 oz⋅in), and the recommended upper limit for intermittently permissible torque is 8 kg⋅cm (110 oz⋅in). Stalls can also result in rapid (potentially on the order of seconds) thermal damage to the motor windings and brushes; a general recommendation for brushed DC motor operation is 25% or less of the stall current.\u003c\/p\u003e\n\u003ch2 class=\"note_warning\"\u003eSpecifications\u003c\/h2\u003e\n\u003ctable width=\"395\" style=\"height: 270px;\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eVoltage\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e12V\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eVersion\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003eMedium Power\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eGear ratio\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e34.014.1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eNo-load speed @ 12V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e230 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eNo-load current @ 12V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e0.080A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eStall current @ 12V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e1.8A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eStall torque @ 12V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e4.7 kg·cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eMax output power @ 12V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e2.8W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eNo-load speed @ 6V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e115 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eStall current @ 6V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e0.90A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eStall torque @ 6V\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e2.4 kg·cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eMotor type\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e12V,  1.8A stall (MP 12V)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eSize\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e25D x 52L mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eWeight\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e88 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 18px;\"\u003e\n\u003ctd style=\"height: 18px; width: 205.641px;\"\u003eShaft diameter\u003c\/td\u003e\n\u003ctd style=\"height: 18px; width: 179.359px;\"\u003e4 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePerformance at Maximum Efficiency\u003c\/h2\u003e\n\u003ctable width=\"364\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"263\"\u003eMax efficiency @ 12V\u003c\/td\u003e\n\u003ctd width=\"101\"\u003e40%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSpeed at max efficiency\u003c\/td\u003e\n\u003ctd\u003e200 rpm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTorque at max efficiency\u003c\/td\u003e\n\u003ctd\u003e0.54 kg·cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent at max efficiency\u003c\/td\u003e\n\u003ctd\u003e0.24 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput power at max efficiency\u003c\/td\u003e\n\u003ctd\u003e1.1 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDatasheet for Pololu 25D Metal Gearmotors\u003c\/li\u003e\n\u003cli\u003eDimension diagram of the Pololu 25D Metal Gearmotors\u003c\/li\u003e\n\u003cli\u003e3D models of 25D mm gearmotors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003edownloadable diagram\u003cspan\u003e \u003c\/span\u003eshows the dimensions of the 25D line of metal gearmotors (units are mm over [inches]).\u003c\/p\u003e\n\u003cp class=\"note_warning\"\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eDo not screw too far into the mounting holes as the screws can hit the gears. We recommend screwing no more than 6mm into the screw holes.\u003c\/p\u003e\n\u003ch2\u003eGearmotor accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003cstrong\u003eGearmotor Face Plate\u003c\/strong\u003e - The gearmotor face plate has two mounting holes threaded for M3 screws. You can use our custom-designed \u003c\/span\u003e25D metal gearmotor bracket\u003cspan\u003e to mount the gearmotor to your project via the mounting holes and the screws that come with the bracket.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUniversal Mounting Hubs\u003c\/strong\u003e - The 4mm diameter gearbox output shaft works with\u003cspan\u003e \u003c\/span\u003ePololu multi-hub wheels. That shaft also works with the\u003cspan\u003e \u003c\/span\u003ePololu universal aluminum mounting hub for 4mm shafts, which can be used to mount our larger\u003cspan\u003e \u003c\/span\u003ePololu wheels\u003cspan\u003e \u003c\/span\u003e(60mm-, 70mm-, 80mm-, and 90mm-diameter) or custom wheels and mechanisms to the gearmotor’s output shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScooter Wheel Adapters\u003c\/strong\u003e -  You can use our\u003cspan\u003e \u003c\/span\u003e4mm scooter wheel adapters\u003cspan\u003e \u003c\/span\u003eto mount many common skateboard, inline skate or scooter wheels to the gearmotor’s output shaft.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e12mm Hex Wheel Adapters\u003c\/strong\u003e - For a general-purpose hex adapter, consider our 12mm hex wheel adapters which lets you use this motor with many common hobby RC wheels.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWild Thumper Wheels\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- These motors also work with the hex adapters included with the 120mm-diameter\u003cspan\u003e \u003c\/span\u003eWild Thumper wheels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":43643694743613,"sku":"clo1789692288283","price":27.17,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/pololu-12v-medium-power-341-25d-metal-gearmotor_1.jpg?v=1789692293","url":"https:\/\/laser-engraved-clasp.shop\/products\/pololu-12v-medium-power-341-25d-metal-gearmotor","provider":"My Store","version":"1.0","type":"link"}