{"product_id":"raspberry-pi-compute-module-5-io-case-rev2","title":"Raspberry Pi Compute Module 5 IO Case REV2","description":"\u003cp\u003eThe Raspberry Pi IO Case for Raspberry Pi Compute Module 5 is a high-quality two-piece metal enclosure for Compute Module 5 and the Compute Module 5 IO Board.\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003e\u003cstrong\u003eREV2 Updated version!\u003c\/strong\u003e We are now shipping the updated REV2 version, which has moved the fan position, so that the CM5IO board can be fitted with a heatsink without it interfering with the fan, to improve cooling. Hot air exit vents have also been moved to encourage airflow through the case.\u003c\/p\u003e\n\u003cp\u003eSee the PCN for more details. Please note that a new REV2 IO Board has been released alongside this. Images still show the REV1 version.\u003c\/p\u003e\n\u0026lt;\u0026gt;\n\u003cp\u003eIt provides space for accessories connected to the IO Board, such as an M.2 SSD or a PoE+ HAT+. The IO Case also includes slots to enable the connection of CSI-2 cameras or DSI displays and includes a built-in controllable fan to support thermal regulation for higher-power applications.\u003c\/p\u003e\n\u003cp\u003eCut-outs in the side of the case allow access to HDMI, Ethernet, USB-A, and USB-C (power in) connectors and to the SD card slot. A mounting hole is provided for an external wireless antenna.\u003c\/p\u003e\n\u003cp\u003eThe optional Raspberry Pi Compute Module 5 Passive Cooler can also fit inside the case.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCase only - IO board, CM5 and cables not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCase\n\u003cul\u003e\n\u003cli\u003e170 mm x 94 mm x 28 mm\u003c\/li\u003e\n\u003cli\u003eApprox 350g weight\u003c\/li\u003e\n\u003cli\u003eSheet metal construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC brushless fan\n\u003cul\u003e\n\u003cli\u003e5V DC (3.5 – 5.5V) supplied via a four-pin fan header on a carrier board\u003c\/li\u003e\n\u003cli\u003e≥ 3.5V start voltage\u003c\/li\u003e\n\u003cli\u003e0.85W power consumption\u003c\/li\u003e\n\u003cli\u003e0.18 ± 0.02A rated current\u003c\/li\u003e\n\u003cli\u003e8000 RPM ± 15% (at 25℃, after 3 – 5 minutes rotating) maximum fan speed\u003c\/li\u003e\n\u003cli\u003e2.46 CFM maximum airflow\u003c\/li\u003e\n\u003cli\u003e21.7 dB noise level\u003c\/li\u003e\n\u003cli\u003e150 mm cable length\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 IO Case announcement\u003c\/li\u003e\n\u003cli\u003e\nRaspberry Pi Compute Module 5 IO Case Product Brief\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Compute Module 5 IO Case Documentation\u003c\/li\u003e\n\u003cli\u003eProduct number:\n\u003cul\u003e\n\u003cli\u003eREV1: Raspberry Pi SC1753\u003c\/li\u003e\n\u003cli\u003eREV2: Raspberry Pi SC1966\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eEAN: 5056561805290\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCM5 IO Case Assembly Tips\u003c\/h3\u003e\n\u003cp\u003eTo mount a CM5 IO Board within your Case, position your board in the bottom section of the case, aligning the four mount points inset slightly from each corner of the Board. Fasten four screws into the mount points. \u003cstrong\u003eTake care not to over-tighten the screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTo use the case fan, connect the fan cable to the FAN (J14) port on the Board.\u003c\/p\u003e\n\u003cp\u003eTo close the case, put the top case on top of the bottom case. Facing the front of the case, which has port pass-throughs, carefully align the screw holes on the left and right side of the case and the power button on the back of the case. Tighten four screws into the screw holes. \u003cstrong\u003eTake care not to over-tighten the screws.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003ePackage Contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x Raspberry Pi Compute Module 5 IO Case REV2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCase only - IO board, CM5 and cables not included\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eRevision History\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of 12\/09\/2025: \u003c\/strong\u003ewe are now shipping the REV2 model.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":43643884994621,"sku":"bxy1789698685809","price":14.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0658\/9716\/8957\/files\/raspberry-pi-compute-module-5-io-case-rev2_1.jpg?v=1789698690","url":"https:\/\/laser-engraved-clasp.shop\/products\/raspberry-pi-compute-module-5-io-case-rev2","provider":"My Store","version":"1.0","type":"link"}